config

Hi guys, I got new hardware for my home server environment this weekend. I reinstalled the current version of Proxmox and was able to restore almost all backups. However, I am encountering problems with one, as my setup has changed slightly. In my last environment, I had a USB drive plugged...

I am having some trouble with proxmox today. I booted it up today and tried to add a new USB device to the hardware configuration of a vm. But I noticed that it was not doing anything. Did not add it to the list of the hardware devices so I tried it again. Still nothing. I thought, maybe 4 is...

Hello, I have rented a dedicated server. I have proxmox installed on it. Now I want to use pfSense as firewall and for internal routing of the other VMs. My goal is to: - An IPv4 for the host on which proxmox runs and is callable on the internet over it. - An IPv4 for the VM of pfSense, so...

i have guest vm OS centos 7 i want to add more network interface (virtio) i created file ifcfg-eth1 with config same like ifcfg-eth0 with different config inside like Mac, UUID, device name an ip its self, and then restart the service and the vm, buat i can't ping to gateway or to another vm...

how do i remove with yellow circle ? i have changed my host name of pve in this file /etc/hosts and /etc/hostname and the i reboot the pve node the config was succeeded but it showing the old name of hostname pve,

Hi, today I set up ipv6 on my router (opnsense), it's working out of the box on the proxmox host. Likewise, I have an ipv6 inside of my vm. The problem is apart from pinging ipv6 on my network, I can't ping / curl any ipv6 outside my lan. Is there any simple solution to make it work?

Moin moin zusammen, ich bin grade mir etwas PROXMOX anzueingen und möchte daher PROXMOX auf einem Hetzner Dedicaed Server betreiben. Leider bekomme ich über die INSTALLIMAGE Lösung nicht zwei getrennte RAID 0 eingerichtet. Ich habe 2 SSD's zur Verfügung und 2 HDD's. Ich finde leider nicht die...

Hello, I won't comment on how it happened, but it happend. ;D In my proxmox I used the command rm -r /etc/pve/nodes Was there anything left to save? The VM's are all still running but they are not displayed on the web interface. I also can't access the VM's via the terminal. I am curious...

Hallo, ich werde mich nicht dazu äußern wie es passiert ist, aber es ist passiert. ;D Ich habe bei meinem Proxmox den Befehl rm -r /etc/pve/nodes eingeben. Kam man noch irgendwas retten? Die VM´s laufen alle noch doch sie werden mir nicht auf der Weboberfläche angezeigt. Außerdem kann ich...

Hi, so due to security policies of my company, I am in need of a double bastion networking setup to connect to my VMs in Proxmox. If I were to ssh into one of my VMs the steps would be: my_pc -> ssh jump_server -> ssh pve-node -> VM However, using Terraform with proxmox provider, I am able to...

Hello experts! I have a CT that got caught in Config Locked (Backup) which I fixed by unlocking it (hoping it was a fluke) but it still does it. I have no idea why since the storage doesn't seem to be the problem (all other CT/VM run backup without getting locked). I do see an error in the log...

Hallo :) Ich habe mich heute am Upgrade zu PVE7 versucht und natürlich alles gesichert, leider ist irgendwas schief gegangen und ich musste einen meiner Nodes neu Aufsetzen. Das Backup von /etc habe ich ja, aber ich finde einfach nicht heraus wie ich das nun zurückspielen kann. Wenn ich...

I want to include args: -cpu 'host,+kvm_pv_unhalt,+kvm_pv_eoi,kvm=off' and args: -device 'vfio-pci,host=00:02.0,addr=0x18,x-vga=on,x-igd-opregion=on' in /etc/pve/qemu-server/<vmid>.conf How should I arrange it? Many Thanks!!

Hi all, I've actually had this card installed since the offset but not had it connected or the setup. I would like to get it set up now and I have connected both fibre links to my switch. In PVE I have a total of 4 physical interfaces showing which would be correct given that the motherboard...

Hello, I have promox, and I have the following processor: Intel Xeon D-1521, But Promox only detects that I only have 2 threads when I have 8. So I would like to know how to modify this, I have already looked a little on the forum, but found nothing :). I attach you a screenshot of Iscpu Please...

### How to use DHCP to manager PVE instead of setting a static IP for PVE LAN ? > I prefer to using DHCP than a static IP address to manager PVE. And how to set? For example,the default config is as this: - /etc/network/interfaces ``` auto lo iface lo inet loopback iface eno1 inet manual...

Hi! Stuck on trying to change lxc config via api, example: curl -Ss --insecure -X PUT --header 'Authorization: PVEAPIToken=root@pam!test=UUID' --data-urlencode onboot=1 "https://pve1:8006/api2/json/nodes/pve1/lxc/107/config"|jq '.' { "data": null } Problem only with this PUT method, other...

Hi, I am trying to import vms from old pve installation with little success. Can anybody help with please? root@vhost3:~# pveversion -v proxmox-ve: 6.2-1 (running kernel: 5.4.34-1-pve) pve-manager: 6.2-4 (running version: 6.2-4/9824574a) pve-kernel-5.4: 6.2-1 pve-kernel-helper: 6.2-1...

I want to set the config setting "lock" from the API docs to be empty (something like POST lock='') to remove it via the API. At least in 2016 this seems to not have been possible. Is there a way that doesn't need root privileges?

I have an old AMD Phenom x6 PC and figured I'd tinker around with it. My disks are as follows 3x1 TB (currently in zraid) 1x2TB 1x8TB ( newly acquired and shucked from a WD black) I don't need more than 5-6TB of storage atm. I'm thinking there is a way to mirror the 3 1TBs and the 2TB on the...