config

I have 2 NIC's on a Dell R610 one is using IP 98.179.240.a going to 1 Vm, fully functional and the other IP 98.179.240.b I would like to configure to anther vm they both have the same subnet, Gateway and DNS settings both are Linux Servers 18.04. how is this done, my modem has one port bridge...

Hi, I've created an account on the server but would like to ensure I open up all the necessary ports so that I can use Ansible to configure and ssh to access the console itself. Not speaking of the individual VM's. That's not a problem. But the server. Can someone refer me to the right...

I have had long discussions with @tim about my 6.0.9 missconfigured interface file. Now I have set up a new config and I need to reality check this one, so that is why I turn to this hive of knowledge.

Hello, Recently, i migrate my server on proxmox to learn how it works and to see something other than Vmware. However, I've a connectivity problem on my pfsense LAN, OPT... Pfsense being a vm on my server without vlan settings into web interface My lan network can’t get out of pfsense. ping...

HI, I use API interface to manage VMs. I have a process that clone the collected VM ID into a new POOL. Some cloned VM will not be in the POOL. I use workaround. After the clone processes I check which VM located in the POOL. I add the missing VMs. But the Pool members responses sometimes not...

This is my first time running my own virtualization environment. PVE looks like the best option. I'd like to get some advice on setting it up. I have a Supermicro box (HW RAID 1 available) with the following config 2x WD Red 4TB drives 1x 2TB NVME SSD 1x Xeon E 2136 2X 16GB RAM 2X 1Gbps NICs 5...

Version: 5.2-2 in /var/lib/pmg/templates/postgresql.conf.in there are two timezone related parameters (timezone and log_timezone) with the default value of 'localtime'. When running without modification the PostgreSQL service fails to start. 2019-05-14 20:21:08.941 GMT [745] LOG: invalid...

Hello, I am trying to understand what is going on, but unfortunately I cannot find the cause. To keep this issue description short, I made a new installation of Proxmox 5.3.8 using the following hardware: Specs: CPU: Intel Xeon E5-1650v3 - 6c/12t - 3.5GHz RAM: 128GB DDR4 ECC 2133 MHz Disks...

Hi, in the Ceph configuration file /etc/ceph/ceph.conf you define a non-standard path for parameter "keyring" in section global: root@ld4257:/# more /etc/ceph/ceph.conf [global] auth client required = cephx auth cluster required = cephx auth service required = cephx...

Hi!, I'm running a single node install on an old laptop using lvm and ext4. I would like to disable the zfs module and all related processes to conserve my limited resources. How do I do that?

So I have my cluster up and running then the other day one of my LXC container had an issue and crashed - I am not sure how but now the configuration file is on one node (node 2) and the raw container image is on another (node 3). I am unable to start the container on either node (presumably...

HI, i have cluster with 5 server with ceph. Ceph cluster was installed on proxmox 5.0 and after some time proxmox was updated to 5.2. One of the thing what change this is that after update ti 5.2 ceph storage device in inventory start show not RAW space, but already useful space (divided for...

Hello, I want to make some changes in the configuration file of LXC Centos container. I changed this file "lxc-centos" (in /usr/share/lxc/templates) and I did reboot server but it did not work. Could you specify the location of this file? Thanks

Hi, I'd like to install 4 proxmox VMs on a VMware What VM settings should I use If I want to the VMs to have their own private network (192.160.100.100) but be able to be pinged by the host computer? I want each Vm to have 2 NICS. Which two NICs should I use? NAT and "host only" or NAT...

Here is what I got. Host server with 96GB ram. Installed Proxmox 4 on it and created 1 VM (CentOS 7) with allotted 65GB ram and 1 LXC (MySQL tempalte) with 1GB allotted ram. From control panel it shows that CentOS 7 vm is using 3.5GB ram and LXC is using 77MB or ram. When I logged in to control...

Hi there, is it possible to change the default LXC container configs so that they support docker? I can go into each container manually but I create a lot of containers so is it possible to do so? Currently I do this: cd /etc/pve/lxc nano 100.conf Then I add these lines: lxc.aa_profile...

Hi, Am newbie to proxmox, I have some Question about network. If i want to config PublishLan(WAN-IP) & PrivateLan(Local) How it can do this ? I want to using PrivateLan as Major for cluster VE but using PublishLan for VM or CT Can any one guide me please? Current i have 2 node of server...

After looking around for suitable answers to this particular question I decided to put some of the advice to the test and figure out what the procedure would be in the event my boot drive (ssd) decided to pack it in. General consensus online and on these forums state that by simply backing up...