wan

Hi, I am trying to reach the following configuration: Proxmox able to reach internet through the WAN (vmbr0) (I have a ISP modem) on a NIC (enp10s0), but without exposing the GUI or SSH (for better security) An internal LAN (vmbr1) on another NIC (enp5s0), on which Proxmox exposes the SSH and...

Hi all, I’m a little confused on how I would achieve this goal..... I’ve been tasked with migrating over our existing PFSense VSrv & setting up HA in the event a server fails or VM fails. I have setup a Proxmox cluster [ 2xDell R630 as PMS & 1xDell 3040Wyse running debian as a QDevice to...

Hi, posting to ask for help. I've been reading a bunch of different posts and trying different configurations without any success. I'm trying to setup my proxmox node to run OpnSense as a VM and use it as router and firewall. The main problem is that the WAN does not assign an IP from my modem...

Hallo liebe Mitstreiter, ich habe mal eine Frage. Ich bin vor kurzem auf Proxmox PVE mit PBS umgestiegen. In meinem Heimnetz habe ich nun alle VMs auf einem lokalen PBS gesichert (ca. 1.5 TB) und diesen nun über eine DSL (40 MBit Upload) ins RZ gesichert. Dies hat logischerweise mehrere Tage...

Hi, i have a dedicated server on ionos, i need to have an additional public ip to one of my virtual machines behind proxmox. The additional public ip for this scope are delivered via vlan 1010 the additional ip is 217.xxx.xxx.164 The gateway is the same 10.255.255.1 so i have do this: auto lo...

I’m running a PVE host with 2 NICs. The intent is to run host management via the LAN/WAN1 (192.168.2.100) and have the VM’s using WAN2. Basically my VMs should have a different public ip has the host But they should be reachable via the LAN so i can ssh into them. The host is managed via the...

Hi there, My ISP changed my router two days ago and gave me four public WAN IPs (x.x.169.149-x.x.169.152). So I want to run multiple proxmox hosts where the VMs use these 4 WAN IPs. I've installed pfsense on one proxmox host, which works on the main WAN IP (x.x.169.149). But I need to...

Hi all, I know a hundred people are asking the same thing, but I've searched them all and can't seem to find an honest and easy answer. I want to setup Proxmox on my home server (it currently runs Ubuntu 22.04 as the main OS but I want to be able to create a home assistant and windows VM...

I'm running OpenWRT on Proxmox VM and so far everything are going fine but the Mini PC got only 1 ethernet port and I heard people say that have both WAN and LAN on single port make internet speed become lower than it should be so I decided to get a Gigabit Ethernet to USb 3.0 (UE300) but I...

There are 4 Ethernet port on my PC, port1 is the Proxmox VE console page, port2 idle. port3 and port4 for OPNSense. OPNsense uses port3 LAN, port4 WAN. The LAN is connected to the WiFi router, and all the WiFi devices able to access the internet. The problem is that only Proxmox VE cannot...

Hi all! I have a domain pointing to my server, with nginx reverse proxy, cloudfare and SSL. All is working well, what I want is to use 2FA only outside my home and not on lan. Is there a way to do this? I´m not able to install a VPN on my job computer, so I need to expose the server to the web...

Hello, I've just set up my second Proxmox VE node at my home in my hometown. Since there are some files on Node 1 I'd like to transfer to Node 2, I want to somehow connect their fileservers (SMB) so that I don't have to use a VPN and a client computer/VM since the network is quite slow on Node...

Hello, I have a strange problem. I have some machines with services using web GUI. I don't know why but I can access only to web service installed inside PVE, but any another VM doesn't give me web access. Loading, loading and do nothing. When I connect via VPN to my home network I can access...

Both networks are working. However, Bond0 has one interface that's running at 10 Mbps Full Duplex and the other at 1 Gb. Bond1 is running at 2 Gb full Duplex. All 4x interfaces are on the same card. Bond0 is assigned to vmbr0 and is my WAN Bond1 is assigned to vmbr1 and is my LAN vmbr0 and...

Hi, I'm working on setting up SDN in a new cluster. The first question is about the physical network topology. Option 1) --------- -- ISP -- --------- | V ----------------------- -- OpnSense Firewall -- ----------------------- | V ---------------------------- -- Proxmox...

Hello, I have been reading for a long time about the feasibility of being able to install a cluster of 3 servers in different locations linked together by VPN. And I suppose that it is highly inadvisable to establish a cluster connection with a latency of 60-70 ms. Does anyone have a similar...

Please delete this post. Thank you.

I want to have a cluster running between 2 node, one at my office and one at my home to keep my data synced. The cluster is quorate, but they do not allow me to access the tabs of the opposite node on the web GUI. However, replication of my VMs and CTs fails everytime. Currently, when I try to...

Hallo, ich bin nun seit 2 Tagen auf der suche um die Einstellung für VLAN im Zusammenhang mit Proxmox und meinem Netzwerk zu verstehen. Ich hab schon die Docu (gefühlt 20 Mal) gelesen und auch viele Beiträge hier und auf anderen Seiten (inkl. Youtube). Mir fehlt es vor allem am Verständnis wie...

hi, how configure proxmox with 2 networks? i got proxmox with 2 vm's. proxmox have only lan ip and first vm got lan ip that works. But how configure wan? proxmox itself dont get ip wan only seckend vm.