upgrade

Hi, Today i decided to upgrade PVE from V6.2.4 to V7.1 I did it according to the following steps: 1. First upgrade to the most recent 6.x version with `apt-get update` followed by `apt-get upgrade-dist`. 2. I followed these steps https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 During the...

Hello I've got a 4 hosts cluster (3 with exactly the same hardware, and 1 with another). I've launched an upgrade on one of my host a few hours ago (1 of the 3 same). No problem during the upgrade. At reboot, no network. I found that my nic names have changed (for a part of them). After looking...

Hi, on my test-cluster i upgraded all my nodes from 7.0 to 7.1 CEPH went to pacific 16.2.7 (was 16.2.5?) Now the monitors and managers won't start. I had a pool and cephFS configured with MDS. I've read somewhere that a pool in combination with an old cephFS (i came from PVE6) it could...

Hello, I was trying to update my installation of proxmox and now I am getting the following when I try to do an apt update && apt dist-upgrade. I have tried to do an apt clean along with apt reinstall proxmox-ve but I keep getting this error and it stops updating and now none of my VMs or...

Hello all, All was working well with my cluster with the update 6.3-2 I have recently upgraded to 7.1-5 and since the upgrade, nodes are randomly crashing. Everytime the node is crashing and reboots. Each time of crash, the sequence of logs are beginning with : "pve1 systemd-modules-load[1913]...

After upgrading from 6.4 to 7.1 I cannot run any VM or container anymore. VMs show errors that there is no virtualization enabled anymore and containers show that they are not able to create network devices. BIOS settings haven't been changed and I am unable to verify the current settings...

Hi guyus! After a dist-upgrade the GUI won't work anymore. The synthoms are very weird cause if you try to check the VM's and the CT's there are no existing anymore, if you try to install proxmox-ve you receive the message: The following packages have unmet dependencies: librados2-perl ...

I upgraded two Proxmox 6.4 servers to version 7 yesterday. One went fine. The other on an HP Z840 has some trouble. I tried commenting out auto vmbr0 and added mac hwaddress b1:d7:33:35:94 found these suggestions in my research. Neither helped. Any ideas? From syslog Nov 7 10:13:01 pve2...

Hallo, ich bin gerade dabei meinen Homeserver mit Proxmox einzurichten und dabei ist mir die Frage durch den Kopf geschwirrt: Wenn ich Proxmox schon seit ein paar Monaten nutze, kann ich einfach mehr RAM oder ne neue Festplatte einbauen und das funktioniert oder muss ich Proxmox wieder komplett...

Hi all, I followed the guide on upgrading from Proxmox 6 to 7: https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 The host I have done it on is a test server before I roll the update out to production servers and after running the upgrade I have no networking. I have seen a number of users...

Hi, I tried to upgrade a 6 nodes pve7 cluster yesterday. We use Ceph and HA for all VMs. I was able to upgrade 4 nodes without issue. But on the fifth node, I lost the whole cluster. All nodes rebooted ! Syslogs for nodes 22 to 27 : update ok for nodes 22,23,24 and 27 upgrade of node 25...

Hello, I recently upgraded my pve 6 server (dedicated server RISE-1 at OVH), following this guide: https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Check_Linux_Network_Bridge_MAC The upgrade went fine, but after a reboot, the server did not answer to ping, SSH, HTTP, etc. pve6to7 utility...

Hello everyone. I have created a VM using windows 2019 cloud-init image on PVE 6.3 and everything works fine. Now I make a change in hardware, for example upgrading ram. after stop / start operation, the password which had been set previously by cloud init, would not work and I cannot login into...

I've spent a couple hours looking at all the threads complaining of CPU load after an upgrade but haven't found a solution. Here are my servers stats after the upgrade: proxmox-ve: 6.4-1 (running kernel: 5.4.140-1-pve) pve-manager: 6.4-13 (running version: 6.4-13/9f411e79) pve-kernel-5.4: 6.4-6...

Hi I've installed the latest proxmox version 7 .. and in the process of making sure everything is updated, I'm running into this error root@homeserver:~# apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0...

Hello, I just updated PVE from 6 to 7 with an OpenVSwitch configuration. With ifupdown it seems like my /etc/network/interfaces will be ignored. Installing ifupdown2 solved the problem - though you have to setup a temporary internet connection to download the package. It's odd that ifupdown2...

Goal: Weekend standalone server upgrade from 6.3 to 6.4 to 7.0 so a German based integrator could install and configure a go live system today at 2pm EST. Background (Short version): The Proxmox sytem resides on a 60Gb SSD. The 6.3 to 6.4 upgrade went terrible. After following ALL steps...

Hi, Proxmox4 (installed on remote server on top of Debian Jessie) was serving well till upgrade in virtual machines started popping out errors making the lxc containers failing to boot. No zfs and ceph and hosting only lxc containers. So I decided to upgrade first to Proxmox5...

Hello, I'm running PVE 6.4-4 and cannot upgrade via the GUI any further. I have only ever upgraded through the GUI. Starting system upgrade: apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The...

Hi, I plan to upgrade a switch stack (2 switches) which means a downtime of 5 min (or more) I guess. 6 PVE Ceph nodes are connected to this stack, with nearly 80 KVM VMs in HA. Even with shutting down all VM for 10 min, I think that PVE nodes would reboot, and I don't what could be the...