sdn

Hi everybody, I am struggeling with a problem where I did not figure out yet if it is a "basic" networking problem or something that has to do with my SDN configuration. The setup is the following: I have two VEs (192.168.2.10 and .11) coupled as a cluster. Within this cluster there is an...

Hello, We're currently trying out using the Proxmox SDN to manage not only guests (using the EVPN controller), but also host connectivity using BGP to experiment with interface redundancy using L3 protocols. It's a bit spotty of course since it obviously wasn't planned for that, but I wanted to...

I'm trying to setup an EVPN based SDN across 2 proxmox nodes. I have 2 nodes with EVPN setup (and they have peered and are exchanging prefixes). These nodes also peer over standard BGP using the BGP controller to my switch, which is receiving the subnets. My switch is configured for ECMP, and I...

Dear Proxmox-Team and other users, I am currently working on a proxmox-lab combining a root server and a lab server at home. I've establshed an VXNat-Zone at the cluster level and a Vnet based on this. After some testing I changed the network-setup of my Cloud-Init Guest and since this point...

Proxmox VE 7.2-7 PowerDNS Authoritative Server 4.5.4 create sdn dns object failed: dns api error: api response is not a json at /usr/share/perl5/PVE/Network/SDN.pm line 278. (500) Does anyone with the same error? Am I missing something? ID: pdns01 URL: http://10.10.0.90:8081 API KEY: ******...

Hi Proxmoxers out there ;) here is an abstraction of what I finally want to achieve in general: That means: There is a cluster of at least two PVEs behind a firewall managed by PVE An actor should be able to access the PVEs via SSH Within the cluster I want to have an internal network In...

Greetings, I have set up a test environment for BGP EVPN SDN as follows: * 3 hypervisor hosts running pve-manager/7.2-7/d0dd0e85. * Each hypervisor has a public IP and is set up as an exit node with SNAT. * Each hypervisor has a private IP that is used to create the BGP EVPN peering. The...

Hi, I'm working on setting up SDN in a new cluster. The first question is about the physical network topology. Option 1) --------- -- ISP -- --------- | V ----------------------- -- OpnSense Firewall -- ----------------------- | V ---------------------------- -- Proxmox...

Good day, I'm having an issue creating a VLAN based SDN. The Zone creates without a problem. It is associated with a bridge that has no IP address so that the zone is fully segregated. However, when I configure and submit Vnets within the zone all of the vnets show as being in error. The...

Hello Everyones, Scenario: cluster 4 nodes Issue: Some nodes get out of sync ( impossible push any configuration ) Log: pvestatd[1971268]: local sdn network configuration is too old, please reload I checked SDN configuration files and they missing configuration. How to restore good state ?

I'm experimenting with the SDN service and have not been able to figure this one out: If I create a Vnet (in my case 11) and tick "VLAN aware", then I cannot define a subnet. If, on the other hand, I untick "VLAN aware", I can define a subnet. What is the point of this and how does one...

Hello, I have been exploring SDN and wanted to try it on Proxmox. Right now, I have an experimental cluster with two nodes. The first thing I noticed is that there aren't the well-known SDN controllers like OpenDaylight, Ryu, and the others. And I'm not familiar with EVPN or BGP as...

Hi, I am testing VXLAN with BGP EVPN with Proxmox 7.1 SDN. BGP and EVPN seem to be working fine, and I can route traffic on VM interfaces that do not specify a VLAN tag. However, when I try to set a VLAN tag on a guest VM NIC which is using a VXLAN VNET, I get the following error: no physical...

I have deployed a VXLAN setup on my homelab cluster and I can get connectivity between containers on various hosts, as long as the MTU on the VXLAN zone is greater than or equal to 1280 (the minimum size of MTU in IPv6). My intended final state is one where the VXLAN networking is encapsulated...

Hello, After putting some thought into it I would like to move my proxmox GUI to another interface. Here is what I want to accomplish: Take the gui off of this address 192.168.10.3 auto vmbr0 iface vmbr0 inet static address...

Hi everyone, i test the last days SDN on my cluster (v7.1-10, lasted updates) and detect some problem with VXLAN over wireguard. The automatic create config is something like this for three nodes: auto <zone_name>_<vnet_name> iface <zone_name>_<vnet_name> vxlan-id <vnet_id>...

Hello all, I am very new to the PVE world, and I am trying to test the SDN beta feature. During initial configuration I am running into an issue that is not posted anywhere. I have installed the libpve-network-perl & ifupdown2 packages, everything seems to go smoothly when creating controllers...

Mainly, it would be fantastic if someone could give me a "here be dragons" on using Proxmox SDN with policy-based routing (i.e. multiple gateways with iproute2 tables + `ip rule`). I would like some more advanced networking (e.g. multiple NICs: i have will have 4 very soon). In configuring...

Hi ! As I tried to update a node this morning to latest FRR version, i get into a problem related to the latest FRR version (7.5.1-99+pve~really7.4) which has an issue regarding set src route-map instruction. The issue encoutered is exactly this one ...

We have been working for long time on the deployment of a cluster based PVE and the new SDN feature. We have had the chance to work with BGP expert and also some of the people involved in the dev. of the project. So this report is a bug report after we moved the cluster to v.7 of Proxmox. We...