raid controller

Hello everyone! I know that the last driver for this controller was for Debian 8 Can anyone make a driver for the Adaptec ASR8805 raid controller? I found a link to build the driver using the DKMS tool, but I couldn't do it. I'd be glad to help!

[TL.DR]: RAID card firmware bug seems to cause a non boot issue on Kernel 6.8.4-N-pve, works on 6.5.13-5-pve. Any ideas on how to fix? Today I have done a lot of troubleshooting for one of my Proxmox servers. It started when I was rebooting the server after some updates. Suddenly it wasn't...

I use Proxmox 7.4-1 (running kernel: 5.15.108-1-pve) installed on LSI MegaRAID SAS 9240-8i with 2 disk and all work fine. After install new version Proxmox 8.2 on SSD disk. I dont see disks connected to RAID controller. I try reboot in old system and disks sda on the RAID controller are...

Hi I'm currently researching in updating from PVE 7.4-17 to 8. I currently have the LSI MegaRAID 9341-4i Raid card installed and is detected and working in proxmox 7 as you can see from the pictures below : When I upgrade to Proxmox 8 should I be worried that my card will not be detected...

Hi, We would like to use HA pair of Proxmox servers and data replication in Proxmox therefore shared storage is required (ZFS, BTRFS?). We also want to use Hardware RAID instead of ZFS erasure coding or RAID in BTRFS. Does proxmox define what commands/setitngs are required in order to setup...

Moin, Ich habe einen "Fujitsu PRIMERGY RX300 S8". Heute nach dem wöchentlichen neustart wird mir keine boot partition angezeigt, oder was auch immer Proxmox Nutzt um zu Booten. Proxmox wurde auf zwei 512GB SSDs installiert die an einem Raid Controller dran sind, beide SSD´s wurden über denn...

Hello. New to the forum. Never had a PVE problem before. I'm hoping this thread can be educational to some. Test your backups! Last week while i was away one of my Proxmox servers "died". When i got back i examined. Cables between my HPE 420i raid controller and my drives had come disconnected...

Hallo Proxmox Community, Ich habe einen Intel Corporation C600/X79 series chipset SATA RAID Controller verbaut. Im Bios habe ich den Controller von AHCI Mode auf Raid Mode gestellt. Dann habe ich im Bios ein Raid-Array aus 4 HDD Festplatten erstellt und dieses Volume1 genannt. In Proxmox wird...

Hi there. I have a raid controller LSI MegaRAID SAS 9271-8i 6G in Raid 6 (Installed 4x SATA HDD). What do you recommend for monitoring this raid card. Thanks for help.

Hi, Does anyone know if the latest Proxmox 7.2-1 supports PERC H330 controller. Thank you for your quick prompts. Cheers!

This has probably been gone over one million times already but time for another round. I did a quick search for the title but didn't find anything that makes much sense for my application in the first 5 threads. I currently have two HP DL380 G7 machines with X5675's 128Gb Ram and consumer drive...

Hi everyone, I've researched a little bit about ZFS and related stuff and I saw on proxmox documentation to not install zfs on top of a hardware controller that has it's own cache management. Here things start to warmup, on my controller i have a cache option while creating a pool, does it means...

Hi, I have a HP Proliant DL360P G8 which commercial features are: But according this screen, it seems that there is no cache: How would you interpret this ? :) Best regards, Christophe.

Hi guys, I would like to know if it's possible to assign more than one phisycal SSD to VM (Debian in my case) with /dev/disk/by-id/ command. I want to passthrough two SSD disk and create a mdadm Raid 1 beetween them to increase read performance and reliability of VM's data (xfs partition on SSD...

Hello, it is possible without RAID Controller in IT Mode several SATA hard drives to a VM like Openmediavault? Would this work with a SATA adapter?

hi every one, I'm new on this forum. I'm looking for a raid card to use with proxmox for a raid 5. i want to use this raid card only for disk where it will have personal data. All VM Os and proxmox will be on another disk. I am asking my self if there is some incompatibility between the...

Hi there, Im configuring my first HPE-Server and need your help. We would like to use the standard Controller P408i-a in RAID10 Mode or HBA-Mode(is it working correctly?) - has anybody expierence if its working fine? If not, what would be better? Second, apart from HP-specific, I'm thinking...

Hi, This isn't a problem unique to proxmox but I wanted to check if the SMART info in the 'Disks' view was coming from smartctl? Reason being, with this controller, you need to use another method to get proper smartctl information. Is there any way to get the correct information into the GUI...

Hello everyone, I have a Chinese server brand INSPUR model NF5170M4. The factory comes with a LSI MegaRAID SAS 9271-8i adapter. I have tried insanely to install several versions of the proxmox, 5.2, 5.4 and 4.4, and I always have the same error. I have created RAID type 6 and 5 and always with...

I would like to use two Dell PowerEdge R610 with proxmox and replication support. If I understood the docs correctly, replication is only available with zfs filesystem and zfs filesystem needs direct access to hard drives. My Dell PowerEdge R610 machines comes with PERC 6/i Integrated RAID...