performance issues

  1. E

    High Disk Latency in Windows Guest

    I'm running an HP ProLiant DL380 G9 with fully updated firmware and PVE 7, and for some reason, no matter what settings I use, I get a very high disk sec/transfer, which is an indicator of disk latency. The guest, Windows Server 2019, took half an hour to install in Proxmox, and took ages to...
  2. U

    PVE Backup to NFS Share (TrueNAS) has poor performance

    Hi, I'm new to proxmox and started my first backup to a NFS share (TrueNAS Server) via 1G NIC. However, the backup process takes a lot of time, because the network performance mostly idles at a few KiB/s and suddenly jumps to 117MiB/s (max Performance) only for a few seconds. My Proxmox Server...
  3. L

    Is the performance of this host ok or bad?

    Hello, I think we have a problem with the disk performance of our Proxmox 7.0 server as a "Windows Server 2012 R2" guest feels sluggish and I guess the values from pveperf should be better. pveperf with running VM (just one on this node): CPU BOGOMIPS: 128001.60 REGEX/SECOND...
  4. V

    Poor disk performance

    Hi, I have a dell r910: 2 x Intel E7-4860 10core 20 thread 256 gig ram Dell H200 HBA controller (factory firmware) 3 x Samsung 4TB SSD. I am getting abysmal disk performance, struggling to get past 70-100MBps Disks are capable of 500+ I would have thought 300+MBps should be achievable. No...
  5. A

    Unresponsive vm during high disk usage

    Hi, I've set up a debian VM with the following config: agent: 1 balloon: 2048 boot: order=scsi0;net0 cores: 8 memory: 16384 name: Docker net0: virtio=16:D0:54:56:5D:02,bridge=vmbr0 net1: virtio=02:75:60:E0:2E:17,bridge=vmbr1 numa: 0 onboot: 1 ostype: l26 scsi0...
  6. F

    Slow Performance on Server 2016

    I'm having severe slowness on a VM with Server 2016. I'm not familiar with Proxmox so any advice would help. The VM is running SQL & RemoteApp. There are about 30 users RDPing into this server and I've thrown all the resources I can at it. The server and the programs on the server just crawl...
  7. M

    Linstor Performance/Skalierungs Problem

    Guten Tag Zusammen, aktuell setzen wir ein Proxmox 6.4-4 zusammen mit Linstor 1.7.1 (DRBD 9.0.28) als verteilten Block-Storage für VM Disk-Images über 7 PVE Nodes ein. Uns ist aufgefallen, dass mit steigender Anzahl an Ressourcen und PVE-Nodes die Performance von Linstor erheblich...
  8. A

    Pretty bad performance, not blaming PVE but my configuration...

    Hi there, Disclaimer: I have never had any interaction with a server virtualization management platform and I just wanted a cool software I could use to run multiple VMs, I know nothing about what a ZFS or LVM drive is, I/O delay... etc. I just have experience working with host OS like Ubuntu...
  9. R

    Ceph Geschwindigkeit als Pool und als KVM

    Hallo! Wir haben einen Ceph-Cluster mit 2 Pools ( SSDs und NVMe's ). In einem Rados benchmark Test ist wie zu erwarten der NVME Pool viel schneller als der SSD Pool . NVMe Pool: Schreiben: BW 900 MB/s IOPS: 220 Lesen: BW 1400 MB/s IOPS: 350 SSD Pool: Schreiben: BW 190 MB/s IOPS: 50...
  10. R

    [SOLVED] Low performance in Cyberpunk 2077 and Photoshop(fonts only)

    Hi!, I have some performance issues with Cyberpunk 2077 game, it has only 18-30 FPS / 10% cpu/gpu loading with GTX 1080 and 8 Ryzen 3700x cores, also Photoshop font transforms is very choppy, on bare metal everything work perfectly, any idea what the problem might be :rolleyes:? Configs...
  11. A

    ZFS Performance Questions on HDDs

    Hello, I'm running a Server with 2 x 8 TB HDD and 1 x 240GB SSD Drive with the following config. # zpool status pool: rpool state: ONLINE scan: scrub repaired 0B in 0 days 22:10:56 with 0 errors on Sun Apr 11 22:34:58 2021 config: NAME STATE...
  12. A

    CEPH Performance issues after upgrade from 15.2.8 to 15.2.10

    Hello, A few information about the System: Its a Hyperconverged Cluster of 5 Supermicro AS -1114S-WN10RT: 4 of the Servers have: CPU: 128 x AMD EPYC 7702P 64-Core Processor (1 Socket) RAM: 512 GB 1 of the Servers has: 64 x AMD EPYC 7502P 32-Core Processor (1 Socket) RAM: 256 GB Network: All...
  13. M

    VM disk performance

    HI all, I suspect this has been covered a million times but I wanted to post with my config to see if people can point me in the right direction. We have a couple of high disk I/O servers - Netxms and another similar style tool - we are getting errors on the servers and we were told to review...
  14. X

    Ceph Cluster performance

    Hi All, I've a ceph Cluster with 3 nodes HPE each with 10xSAS 1TB and 2xnvme 1TB below the config. The replica and ceph network is 10Gb but the performance are very low... in VM I got (in sequential mode) Read: 230MBps Write: 65MBps What I can do/check to tune my storage environment? # begin...
  15. N

    5800X Horrible Performance

    Hey, so I have a 5800x and I did a KVM for 2 clients to host their game servers. I followed all the guides here and I have all the drivers and OS is Windows Server 2019 Desktop. Their current KVM settings are: cache writeback, ballooning enabled, qemu guest enabled etc... I want both of...
  16. A

    Proxmox and VM performance are too slow, Linux VM Taking 3-4 hours and Windows VM 7-8 hours to bootup

    Hello, I installed a new setup in my server. (Unfortunately old one crashed completely). I had to rebuild it from scratch. In capacity, it's 2tb HDD SATA + 500 GB SSD, with 64GB RAM. I followed the steps as per documents. I selected Ext4 for my installation. Surprisingly, once I loaded vm's. It...
  17. F

    [SOLVED] Samsung 870 QVO 1TB Terrible Write Performance

    Hi Everyone, I got 2x Samsung 870 QVO 1TB. Iknow iknow, they are not the best and can be really slow and the lifespan isn't great. My aim was to replace my current 8x 146 GB HDD setup, as I wanted to reduce power consumption. I installed Proxmox on them with a ZFS mirror and the performance...
  18. D

    Consumer-SSDs im RAID 1 mit sehr schlechter Schreibperformance

    Hallo, ich habe folgendes Problem. Wir haben ein "Budget" Node mit 3x Samsung 860 QVO 1TB. Eine Disk wird für das System an sich verwendet und ein Software RAID 1 für den VM Storage. /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 ...
  19. A

    Problem mit Ceph Storage (unter anderem kein klonen einer VM möglich)

    Hallo, wir haben einen Proxmox Cluster mit 3 Nodes installiert. Jede Maschine hat 128 GB RAM und 2 ssd für das Proxmox System installiert. Zusätzlich sind in jeder Maschine 2 physikalische CPU mit je mindestens 6 Cores installiert. Für das CEPH System sind pro Server je 2 SSD's der...
  20. maxprox

    [SOLVED] Performanceprobleme, NIC Settings zur Performancesteigerung

    Hallo, EDIT: falls das jemand interessiert, würde ich schnell zu Post #16 springen ;-) Problem: Eine Medizinsoftware, die auf einem neue aufgesetzten Windows 2019 Std. Server läuft, macht Performanceprobleme. Die Software wird per Verknüpfung auf den Windows 10 Clients morgens gestartet und...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!