nvidia

Hi, before writing this lines, i've spent 2 enterily days trying to make work this hardware and reading a lot. So now, i think i need some experienced help. ENVIRONMENT Proxmox 5.4 because latest one doesn't work anything related to vfio driver assign to gpu. HARDWARE I'm using two computers...

Hello, I'm struggling to get my first ever Proxmox system setup. I can get to the point where a windows 10 guest sees the 1070 ti, but I cannot get rid of the code 43 error. I've tried all sorts of troubleshooting including args, passing the rom through, uninstalling and reinstalling drivers...

Here are some relevant specs for my machine: Motherboard: Gigabyte ga-z170x-ud5 CPU: Intel Core i7-6700K GPU: GTX 980 Ti I've tried following this tutorial EXACTLY but just ended up with a machine giving me error 43...

First of all this used to work fine. It took me a long time to configure the first time, but eventually I resolved all the roadblocks (GPU romfile and everything), and had this setup working fine for many weeks. (besides a few weird Proxmox host crashes with certain USB devices being passed...

EDIT : Solved following https://www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/ Hi everyone, I'm "new" to proxmox and to this community, and I'm requesting a bit of help. I've already set-up a few VMs, and I would like a W10 VM using my GT710 for a...

Hello, I have an NVidia GTX 1660 GPU that I have to use with Windows Server 2019 only that following the official guide the VM starts, but it does not work nor noVNC from browser and not even remote desktop that I had activated, but proxmox from browser tells me that the VM is active, is there...

My pc setup ===================================== host gpu: (nvidia 2070 super) guest gpu: (radeon rx 580) cpu: Ryzen 7 3700X ===================================== My config ===================================== args: -cpu host,hv_vendor_id=1234567890ab,kvm=off -machine type=kernel_irqchip=on...

I succeeded to passthrough my gpu with the following settings in proxmox 6.0 but I can't get it work on proxmox 6.1. my pc parts are as follows ====================================================================================== motherboard: x570 aorus elite gpu slot 1: rtx 2070 super gpu...

Hi, I'm new to Proxmox and also not good at english but I'll do my best. I've recently build my desktop pc. My pc parts are like below. cpu: ryzen 3700x gpu(host): radeon rx580 gpu(guest): 2070 super mother board: x570 aorus elite and memory and so on. I'd like to passthrough my 2070 super to my...

Hi guys, I want to share my GPU (Nvidia Geforce GTX 1080) between all of my VMs but the amount of shared GPU memory is 512MB but I want to increase this limit to 8GB! Can anyone help me?

Hi, I've been successfully using GPU passthru to a Windows 10 VM with PVE 5.x. No problems at that point. But some days ago I upgraded from PVE 5.4 to PVE 6.0 and now the VM doesn't manage to start Win10 OS. The exact behaviour when I start the VM is that I see Proxmox's UEFI splash image (in...

I'd like to enable hardware-accelerated video transcoding via an Nvidia GPU card for an instance of Plex Media Server running inside PVE's flavor of LXC container. Has anyone been successful in enabling Nvidia GPU pass-through on Proxmox using nvidia-container-runtime? (LXC or KVM, doesn't...

Hi Everyone, Is there any information about Memory Address Limit for proxmox? VMware has it described below. ://kb.vmware.com/s/article/2087943 I am having issue trying to pass through 8x Tesla GPUs to a VM on ovmf bios and suspecting could be related to settings in BIOS. All 8 GPUs can be...

I have a issue when i try to install my GPU i followed step by step the tutorial --> https://forum.proxmox.com/threads/gpu-passthrough-tutorial-reference.34303/ but now i confronting a issue i have disabled disaplay is set to none and when i type $ glxinfo|egrep "OpenGL vendor|OpenGL...

Hello everyone, Today i'm co-fronting a issue, i have followed the tutorial like step by step but i can use my Nvidia Geforce on the VM with x-vga i don't know why my configs, vm103.conf dmesg | grep ecap to be sure than remaping is supported/or not supported my...

This is a tricky one - I've tried everything Google suggested, and then some. Relevant PVE stack, H/W and guest configurations are below:

I can pass through 4 individual Tesla P100's to 4 VMs but when combining to pass through any number above 1 i get the following error when running - dmesg | grep NVRM 1 of four works, but any amount over 1 the below output is produced. admin@gpu-host:~$ dmesg | grep NVRM [ 4.550588] NVRM...

Hello everyone, I'm a student in a french informatic school and I've got the project to turn my laptot in a VM server using proxmox OS. But my laptop must also be in the same time server and client, I want to be able to connect on the vm from the laptop that host the vm in the same time. Here...

Hello everyone! I try to PASSTHROUGH my nvidia GTX560TI in proxmox. I done this steps: Change grub parameters to this GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on" add to /etc/modules this lines: vfio vfio_iommu_type1 vfio_pci vfio_virqfd execute this command, because Interrupt remapping...

Hi, everyone. I'm new to proxmox, and I'm trying to passthrough different video adapters to guest W10. So I have a proxmox 5 installation on gygabyte motherboard with support vt-d and core i5 6600T supported it too. PVE installed on ZFS raid 1 fully EFI and everything works fine for me except...