nfs

Hello, i need help for the Firewall settings for NFS Shares in VM's. My Proxmox Server has 3 different LAN Interfaces for WAN LAN and DMZ. I have different VM and container in this networks. My Problem: In the DMZ i have a Debian11 VM and try to connect an NFS Share from my NAS in the LAN...

I am currently running into permission errors inside an Alpine LXC (using the template included with Proxmox 7.3) when trying (as root) to mount a folder shared on the Proxmox host. The error occurs for both SMB and NFS. Here is how it looks like from the client side: Alpine-CT100:~# cat...

I am having an issue with my Proxmox 7.2 install. I am getting between 65-70% packet loss almost all the time, and I am unable to connect to my NAS via NFS where I store my VM disks and ISOs. My Proxmox machine is the only one having trouble, and nothing has changed setup wise (at least before...

Hello, we have 3 proxmox servers, we take weekly backups of our containers on an external drive using NFS. The first 2 server's backups are successfully being stored. However, the 3rd server seems to get stuck while taking a backup. Here is the backup job logs, we had added a write bandwidth...

Hi, Recently I have migrated a disk from Azure to Proxmox. I use a NFS share to easily download the disk to Proxmox directly and then mount it to a newly created machine. Which works fine! After testing everything I wanted to move the disk to ceph. But this does not seem to work. Even migrating...

Hi all, I'm trying to put a nfs share from my nas to my datacenter so it is available on all my nodes. The nas is a bit old but i have only that for now. It is a DLink DNS-1550-04 I make a /ldnas/backup with for nfs * and 10.90.0.2 (to test, the ip is the principal node on my cluster)...

I use a synology to hold templates and isos, I added another server to my cluster and it is freaking out, I have got it to work normally by disabling the NFS share from a datacenter level. In trying to figure out what is wrong I was testing via CLI and was able to see that I can write files...

mounted the share in fstab and did mount-a in truenas i configured an nfs share But everytime i go to add a datastore and add the absolute path to /mnt/ProxMoxSharea it will not back to it. Even though that path is mounted on the backup server.

I'm having an issue with the Gray ? In the system log it shows: Oct 14 04:00:48 mscluster1-pve02 pvestatd[3184]: mount error: mount.nfs: mount system call failed Oct 14 04:00:49 mscluster1-pve02 pvestatd[3184]: status update time (360.802 seconds) I have set up a second NFS storage drive and...

Hi folks, Where in the file system shall I request a mount point to be mounted at boot time? What I'm currently doind post boot is simply that: root@pbs:~# mount fqdn:/volume/datastore /mnt/ds1/ Obviously a datastore is hosted on that mounted NFS share. Everything works all fine, I'd just...

Hey everyone, I have some of my VM Disks on my Unraid NAS on a NFS share, connected via a 10Gbit link; Now, after some time, i started noticing ATA Errors coming up in my Nextcloud VM. It has 2 Disks, one for data and one for the OS. While the VM itself runs fine, the disk for the data...

Hi All,, We have a R7525 Dell server (2 sockets, 64 cores/socket, 2 Ghz base clk, 3.2 Ghz boost clk, 128 GB RAM, 96TB [8TB x 12] 7200 rpm SAS HDD, Dell BOSS S1 SSD 240G RAID1 boot, H745 PERC RAID controller with PCIe 4.0 bus. 2 x 2 raiser slots are available, one is having H745 RAID...

Hello all, I've just setup a nfs server (https://help.ubuntu.com/community/NFSv4Howto#NFSv4_Server) on my NAS (a QNAP with Debian installed). The system should be using NFSv4, and so I manually edited my storage.cfg on PVE as following: nfs: nas_proxmox_backups path...

I recently switched to using Proxmox as my OS of choice and installed OMV inside a VM. I passed through my already existing 4TB drive and everything is good so far. Now I learned that in Proxmox if I use unprivilged LXC container, I need to mount either NFS or SMB share to Proxmox and then bind...

Hey y'all, So I recently set up proxmox on a r720xd and run it as a secondary node in my proxmox cluster. It has 10 1.2TB SAS drives on it (ST1200MM0108) that i have been running in raidz2 and i use a seperate SSD for the host (which runs a NFS share for the zfs pool) and the single VM i run on...

Hi. We have a Proxmox VE with ~50 CT's running. We need to share some files between all the CT's. For that we use a NFS mount that must be mounted by all the CT's. At the beginning I opted for mounting the NFS mounts in the host and then give them as resources using the -mpX parameter. I...

Is there any way to unmount a mp through pct ? I see you can mount a mp through "pct set" but can't find any way to unmount the mp without a reboot of the LXC while I would like to avoid reboot on production container. Thanks

Hi, Right now I got a single PBS-VM1 on Host2 that got its datastore from Host2 via NFS. And this PBS-VM1 and NFS share is available all the time. Problem is that I can't backup Host2 or guests on it, because if Host2 fails there would be no running PBS to restore them from. I also got Host1...

Hi, I've some problems adding my synology nas nfs share as a proxmox backup server datastore. The nfs share is mounted in "/mnt/backup-nfs" and seems to be accessible without any problems. Also "df -h" shows the share: After adding the share in pbs as a datastore it seems to work without any...

Hi, i restared my Proxmox host and since then I cannot connect to NFS nor CIFS shares. The state of the storage is "Unknown". When I open the storage device I get unable to activate storage 'truenas' - directory '/mnt/pve/truenas' does not exist or is unreachable (500). Well it is reachable and...