Hello team, it's a pleasure to talk to you.
I've been researching on what I need and I found what I was looking for so I am here.
Whenever my storage falls my virtual machines lose connection with the disc.
My storage consists of a FreeNAS using QLE24xx plates, the servers where I have also...
Good afternoon friends.
Whenever I need to shut down or take a virtual machine takes enough. Almost 5 minutes.
Is there anything that can be done to improve this time?
Hello,
the title describes the problem pretty well. It's a single node with no cluster or any "exotic" external storage. The problem has been happening for a while now, may be some months (we've learned just to not backup entire VMs and not to restart them unnecesarily, and never at heavy usage...
Hi there,
I have a problem with my configuration. Basically the vmbr0 has OpenVZ containers which are working as intended. I added a new KVM which I want to use on a different subnet and after reading for days I cannot come up with a working configuration. I think it has something todo with how...
This problem might have been discussed before on other threads, but I feel it is unique in my circumstances. I've installed PVE 4.1 on Debian Jessie on 2 separate machines, and clustered them together using instructions in the PVE Wiki.
I'm not able to use the NoVNC Console in PVE using Safari...
Hi,
I have 2 KVM VMs (KVM1 and KVM2) connected on the same host's vmbrXX (bridge mode).
I would like to isolate KVM1 from KVM2.
I tried to use the proxmox firewall and add the 2 following rules for KVM1 (and the firewall option is ticked on the nic):
[RULES]
IN DROP
OUT DROP
But I can ping...
Hello everyone,
hopefully someone here can shed some light on what may be going on with my only KVM VPS that i'm running. I mainly use OpenVZ on Proxmox but for this particular VPS, because it's running under CloudLinux, I had to use KVM instead. The VPS ran fine for almost a year but now it's...
Hello!
I have a non-proxmox based server inthere it's running simple lxc, and container running on LVM logical partition. I can create this container type a simple following command:
lxc-create -n HOSTNAME -t ubuntu -B lvm --lvname HOSTNAME --vgname main --fstype ext4 --fssize SIZE
But, when...
First sorry for my bad English i am French ! ;-))
Cloning DC is a new feature from Windows serveur 2012 r2 I use to use it cause it's very very usefull and simple for add other domain controllers in a Active Directory Domain To do that the hypervisor who is use need to support what is call the...
Hi,
I got Proxmox installed and set up just the way I envisioned it and I have been loving it. There is one thing that's left and I can't seem to get it sorted out.
Current set up is as follow:
- Proxmox installed with 4 NICs and an LSI HBA card.
- eth0 is bridged for the host itself.
- eth1...
Hi,
When I start my fileserver KVM VM from the console I see the following error:
WARNING: Image format was not specified for '/dev/disk/by-id/ata-HGST_HTS721010A9E630_JG40006PG0EVED' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on...
Dear Users,
I would like to ask everything if there is any possibility with Proxmox/KVM known to change the values of the motherboard information in smbios. I know that is already possible to modify the system information, but I'am also looking for an option to change the motherboard values...
Hi,
Long ago, I had set up PVE to pass the external IP address through to a KVM firewall by doing something like the following:
PVE's vmbr1 was on eth1 with a static address of 0.0.0.0.
vmbr1 was eth0 on the KVM running the firewall distro.
The firewall distro had its eth0 set to the external...
Hi,
I have PVE4 installed on a Kimsufi VPS, & I have just the one IP address on vmbr0 with which to access the host. As such, I have my KVM set with NAT selected in the network interface, since there aren't any more addresses that can be assigned to it if I were to use a bridge.
How do I need...
Hi,
I have Windows 10 running in a KVM instance, & it's audio icon says there's no audio device installed. See screenshot [1].
I'd like to be able to hear remote audio when connecting via RDP, but it doesn't work.
How can I do that? Could someone help me please?
Thanks,
-J
[1]...
Hi,
My PVE box only has 8GB RAM, & I run 2 KVMs- one with 4GB, & the other with 3GB.
I'm wondering if I can allocate 4GB to the one which currently only has 3GB, and still have enough for the underlying host processes to run unencumbered.
I don't use ballooning, as it's been problematic in...
Hi All,
I would like to share my successful attempt of Intel IGD passthru(primary)
with QEMU/KVM. Ones interested can head over to my demo :
Cheers,
Raghavan
hi,
since ProxMox uses not *.xml: how can I activate:
<domain type='kvm>
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
</features>
I know that it is possible to use "args" in *.conf ... so I tried:
args: '-features hidden state=on'
but:
kvm: -features...
Hello,
I am running Centos 7 on KVM with Proxmox 3. What is best practice to add multiple FO IP's to my network. Right now I am using 1 IP via Bridged network with Virtual MAC address assigned. Should all IP's added in same fashion? Or there is another way to do it? If so please instruct...
Hi all,
i decided to give proxmox 4 with kvm a try.
For testing performance with my existing ceph cluster (so a ceph cluster built outside proxmox) i created a 2012R2 VM with KVM and one VIRTIO disk point to my ceph pool, default values.
In the beginning my problem was that i couldn't reach...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.