issue

Hi, I'm experiencing issues loading the PVE Web UI of a remote home server to which I have a somewhat poor connection. To be more specific: I'm running a remote home server, which gets internet over a mobile network connection with quite bad upload. I have a site-to-site WireGuard tunnel...

HI Guys, My Proxmox is freezing and need a reboot every 4 / 5 hours, even with low cpu load. What i've tried so far: - Switched the NVME's (they are in raid1 2x 2TB, also tried without raid, same issue) - Switched the RAM modules - Reinstalled proxmox with 7.4 - Reinstalled proxmox with 8.0 -...

Hi, we are running quite a large Proxmox cluster environment here (23 nodes) and have recently updated all our nodes to Proxmox 8.0 according to the official documentation. Since then we are having severe issues with all our qemu-driven Windows Server 2019 VMs, which we use to provide users...

Hello, So i tried to install Proxmox nativly. After it entered the Proxmox installation Screen i had the option to select Proxmox VE and Advanced options. I selected Proxmox VE. The the Bad things started to happen. First it drew an purple line across the screen, then as the time went by the...

Hello everyone. Currently working on the proxmox roles I would like to report a behavior on this part. the vm config role blocks the configuration of a cloud init on the network option. Indeed I think it could be two separate things. I can restrict the hardware part of the vm on the network to...

Hi, On one of my 2-serwers cluster all KVMs status turn to gray (unknown). Sometimes issue dissappear by itself. Sometimes "systemctl restart corosync.service && systemctl restart pve-cluster.service && systemctl restart pvedaemon.service && systemctl restart pvestatd" help. Bellow syslog from...

Hello pals, I have a problem for a few days that has become uncomfortable, and it is that I have my proxmox server with several lxc and vm that has been running without problems for 1 year, but because I have been away from home for a long time, I had not updated and had the version proxmox ve...

Hello there, I've been running a 2 nodes cluster (no HA) for the past 6 months, yesterday I decided that it's time to upgrade them because the new version was available, I did an upgrade on both nodes at the same time, one node updated perfectly the other one was still updating, in the meantime...

Hello, Since I updated to Proxmox 7.3-4, I'm getting the following error when pulling some docker images, inside LXC containers. What should I do? This worked fine before updating.

Hi there! I am running Proxmox 6.4-13 and from the information that I gathered I seem to have an issue with apparmor after doing an update & dist-upgrade for my container. There is a thread from 2017 that talked about a similar issue and the solution was to downgrade the kernel. I posted in...

Hi there, as the title suggested, I would like to troubleshooting my issue with you. I installed a Proxmox Backup Server on a dedicated hardware: If I run proxmox-backup-client benchmark --repository BackupPVE i have this result: Now, from my main Proxmox server I get this result using...

Hello I have a Intel NUC Kit NUC8i5BEH running Proxmox and system is freezing randomly and i have to hard reset for it works fine until it happens again. Kernel: 5.15.39-1-pve Version: 7.2-7 /etc/network/interfaces auto vmbr0 iface vmbr0 inet manual bridge-ports eno1...

Hello all, We have a following Proxmox setup: One storage server, HP DL380P G8, CPU Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz, 32GB RAM Storage Pool assembled on 8xSSD, Samsung SSD 870 QVO 1TB, which are put into the four mirrors with 2 drives each, and then mirrors are setup into the stripe...

Hi, I've been following the suggestions and steps from the Upgrade_from_6.x_to_7.0 wiki and, right now, I am stuck at 93% for more than an hour or so in the apt dist-upgrade execution. This is what the SSH screen shows now: Setting up libmath-random-isaac-perl (1.004-1.1) ... Setting up g++-10...

We have been using Proxmox for years and have a 3 nodes cluster that had been healthy for a while then recently we noticed that VMs couldn't be deleted (destroyed) by any means (GUI, CLI, or the API) We don't see any storage issues that could refer to a problem with file locking, The VM disk...

I solved the issue. Title says issue. This is a fresh install. Network subnet 255.255.252.0 gateway 10.0.0.1 pve 10.0.3.1 /\ 10.0.0.250 switch 10.0.1.2 ssh client 10.0.1.88 (Archlinux workstation) root@pve:~# cat /etc/network/interfaces auto lo iface lo inet loopback iface enp2s0f0 inet...

this is more than 6 months since I have had this issue, proxmox server crashing randomly. and the only thing I can do is reboot the system by pressing "Reset Button" the output of "pveversion -v" proxmox-ve: 6.4-1 (running kernel: 5.4.157-1-pve) pve-manager: 6.4-13 (running version...

Hello, today I've decide to update proxmox from 6.3 to 6.4 but i have discovered that one of my node can not access internet and can not ping the gateway. Ping result: ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. From 192.168.2.202 icmp_seq=1 Destination Host...

Hello there, i got an error message i seem to unable to resolve myself: sylux pve-firewall[1416]: status update error: iptables_restore_cmdlist: Another app is currently holding the xtables lock. Perhaps you want to use the -w option? I found another thread here, where ip filtering should be...

Hello i got 1 node on my new server currently have 2 VM (Windows 10 Pro 64 bit based) i allocated RAM 8 Gb each VM but the usage RAM on proxmox node was very different from 2 VM For VM 1 VM 2 Node i already start balloon service too on windows services, is that normal for node? sorry for...