hetzner

I have 2 servers on Hetzner Dedicated. I would like them both to talk to each other. My test configuration looks like this: Server 1 has Pfsense connected to WAN (vmbr0) with an additional Ip address from hetzner. A test server with debian on it. A jenkins server that hosts a website on...

Hallo zusammen, ich habe mein Proxmox Server auf die Version 7.0 geupdatet und seit dem funktionieren die IPv6 Adressen auf den VMs und LXCs nicht mehr. /etc/network/interfaces des Hosts auto lo iface lo inet loopback iface lo inet6 loopback auto enp2s0 iface enp2s0 inet static address...

Hello everybody, I have a dedicated on Hetzner on which I have installed Proxmox. The problem I have is that with both Bridge and Routed configuration, I only have ping which works 100% while TCP connections only work sometimes (3/10 or so). Configuration: Host with Debian 10 and Proxmox...

Hello, I have been having some issues with getting the LXC / VM to resolve domains, I was previously able to configure IPv6 and this worked without any issues, However, since purchasing an IPv4 Subnet I have not been able to use the boxes. They can be pinged from a remote host, and I have...

I got a second subnet to put on the centos 7/cpanel server but can not get the second network to run, configs below The original working subnet is the one on vmbr 5 and the new one on vmbr6 Host cat /etc/network/interfaces # network interface settings; autogenerated # Please do NOT modify...

Hello guys! Iam trying to setup PfSense on my ProxMox hosted at Hetzner. I want to use the PfSense as a router so i have 2 public ips from Hetzner. The problem is i cannot access the webui via the "wan" IP and i already did "pfctl -d" to allow it to use the wan ip. That is my ProxMox Host...

Hallo auch! Ich habe aktuell das Problem, dass meine VM's keine Verbindung raus zum Internet haben. Ich habe 2 Linux Bridges sowie IPTables/NAT konfiguriert! vmbr1 für die Kommunikation zwischen ProxMox und PfSense 10.0.0.1 vmr1 => 10.0.0.2 WAN (PfSense) - Die Weboberfläche erreiche ich daher...

Hello there! I got a problem that my VM's dont have any connection to the internet and i don't know why. I have setted up 2 Linux Bridges and IPTables/NAT is configured vmbr1 for communication from ProxMox to PfSense 10.0.0.1 vmbr1 to 10.0.0.2 WAN (PfSense) - I cannot access the Webinterface...

Hello, Dear Community I want to couple two VMs Proxmox within one robot account on Hetzner. I have created vSwitch, then on both Proxmox added to /etc/network/interfaces iface X.4000 inet manual auto vmbr4000 iface vmbr4000 inet manual bridge_ports X.4000 bridge_stp off...

Hello, i try to connect Hetzner Storage Box with Cifs with: mount.cifs -o user=u264409,password=hbJ3dnxeKO3232323 //u264409.your-storagebox.de/backup /mnt/hetzner/ mount error(2): No such file or directory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Firewall is off!

Hey, Maybe you can help me with some questions. I would like to set up a Proxmox Cluster in Hetzner (2 nodes + Proxmox backup (which will act as a Quorum for the cluster)). Setup: - The 2 nodes will be in the same datacenter and the backup will be in different datacenter (we can live for a...

Hallo zusammen, ich habe einen kleinen Dedicated Server bei Hetzner bei dem ich schon seid einiger Zeit Versuche IPv6 in Kombination mit einer OPNsense VM einzurichten. Mein Ziel ist eine v6 Adresse auf dem WAN Interface von meiner OPNsense damit ich einen v6 Tunnel aufbauen kann. Aber leider...

Hello, i have one subnet and one additional IP. I am trying to assign 2 network interfaces to a virtual machine. One Interface with an IP from the subnet and one with the additional IP (different Gateway) I have already tried a few things, but unfortunately nothing works yet. How do I achieve...

Hey, what is the best way to route the maximum number of IP addresses to the guests (IPV4)? I have 3 Subnets (/29, /27, /27) and an additional IP that I wish to fully utilize (8, 32, 32 IPs) without loss of an IP for the host system and broadcast/subnet. I have theorized this config but...

Hallöchen, ich habe mir einen dedizierten Server bei Hetzner geholt und habe mich dazu entschlossen Proxmox zur virtualisierung zu verwenden, habe jedoch ein kleines problemchen beim einrichten. Ich habe für die VMs ein /28 Subnetz dazugeholt, nichtahnend, dass das die einrichtung der...

Hello everybody, I have two dedi's at Hetzner, on each Proxmox. One VM runs on each Proxmox node (Debian 10) The VMs can ping each of the following: - oneself - the own host node - the other host node BUT they cannot ping the other VM on the other host node. (Destination Host Unreachable)...

Hallo zusammen, Ich habe bei Hetzner zwei dedi's, auf jedem Proxmox. Auf jedem Proxmox-Node läuft jeweils eine VM (Debian 10) Nun können die VMs jeweils folgendes anpingen: - sich selbst - den eigenen Host-Node - den anderen Host-Node ABER Sie können nicht die andere VM auf dem anderen...

Hi Guys, Im new to proxmox and wanna try it out, but i cant get it to work. It is installad and running on my hetzner server, i have 2 additional IPs with sep mac addresses. I have read hetzners own guide and tryed it without any success. I want to run 1 windows machine and 1 linux machine on...

Hello, I'm facing some trouble post-installation with networking on KVM Guests. After spending around ~6 hours on setting up networking to work for containers, it appears that KVM Guests can't connect to the internet. With that said, not all guests don't connect, Windows 10 guests connect with...

I have a dedicated server and a subnet on Hetzner, decided to use Network Configuration Hostsystem Routed config, was following their guide, https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve Here's my server config: auto lo iface lo inet loopback iface lo inet6 loopback...