hetzner

Hi! I've recently purchased a Hetzner dedicated server and want to setup multiple VMs with multiple IPs available to use. For example, I want to have 3 VMs, 2 sharing an IP & one with its own. If I was to purchase an extra IP from Hetzner, how would I go about setting proxmox up for this? I'd...

Hallo Proxmoxer, ich habe seit Wochen folgenden Problem. Ich habe ein Ansible Skript genaut welches einen oder mehrere Hetzner Server komplett einrichtet. Proxmox ist nachdem das Skript durchgelaufen ist mit seinen Basics eingerichtet und erreichbar. Jetzt stehe ich vor dem Problem das ich mit...

I have a problem with Hetzner in Routed mode since I have to apply a subnet to the server. According to your docs (one thing) and according to your support (something else) I have this setup. No matter how hard I try, I can't understand why it doesn't work, even more so when I see the routes...

Having some issues with a container. Typically I use a virtual router with containers as I have limited IPv4 space so this is my first time doing a container on its own IP. I have set the network settings with the IP/24 I want to use and the gateway being the host machine's IP as normal. But...

Good day, I want to use my /64 IPv6 subnet on my Hetzner server for my virtual servers. I have the problem that the virtual machine can not reach the internet; I keep getting the following error message: root@mail:~# ping 1.1.1.1 ping: connect: Network is unreachable With kind regards

Hi, I have additional ip on Hetzner, but I can't figure it out how to use it, all my attempts have failed. Below I have attached my most successful host and virtual machine config. From a virtual machine, I can ping 173.1.2.98, but that's all. Thank you. Main ip Hetzner info: Gateway...

Hello. I'm trying to configure my proxmox setup in a way that my main ipv4 is used by the host itself (the routed configuration in here), while the secondary ipv4 is used by the pfSense VM and then propagated by that to other VMs. Based on Hetzner documentations I have changed my...

Hallo, ich habe bereits die Anleitung von Hetzner abgearbeitet, bekomme jedoch für die VM´s kein Internet. Könnte mir da jemand behilflich sein? Bei den IP-Adresse habe ich /26, da die Netmask laut Hetzner Robot 255.255.255.192 ist. in der /etc/sysctl.conf ist net.ipv4.ip_forward=1 und...

Hello everyone, I have looked around and did not find the one solution that fits my current setup. Maybe you can help me what needs to be done to enable the additional subnet for my instance. Here is the general network layout: I would like to use the additional subnet for several servers...

Hi! I'm fairly new to using proxmox and am wanting to use my hetzner dedi to run some VMs on. I only have 1 external IP and am wanting to setup pfsense for port forwarding etc but cannot figure out how to do so. When I used hetzner's script, a vmbr0 adapter wasn't made for me so I'll also need...

Hi all, I have a problem with my proxmox at Hetzner. The system has two public IP addresses. My goal is to leave one IP address on the Proxmox, the second IP address should point to a pfSense. At the moment I can reach the Proxmox without errors under the primary IP address of the system...

Hi, I have been trying to setup Wireguard in an LXC Container on Proxmox using this Guide: Proxmox LXC Wireguard It would seem though I have issue with Proxmox Networking or FIrewall. The port ( as described in the guide and as I have configured, 51820) is not available publicly and the...

Hi, I'm pretty new at this, managed to get a proxmox server up and running at hetzner using zfs raid1 and efi boot (took a while) Now trying to get the basic network config right for a single IP setup allowing me to setup an use virtual machines within my network. I tried a script to automate...

Hello, I can't figure out how to setup a bridged config on hetzner. I followed there tutorial and have an /etc/network/interfaces below auto lo iface lo inet loopback auto enp35s0 iface enp35s0 inet static address 65.108.xxx.xxx netmask 255.255.255.255 pointopoint 65.108.xxx.yyy...

Hi! I would llke that someone help me configuring Proxmox with an additional subnet on hetzner. Please, i actually really need help i'm struggling since houuurs My Discord in case : ✞ ! . ✞#6355

Hey, I have a cloud server, a vSwitch & a dedicated server at Hetzner. These are connected as follows: I can ping 10.0.0.2 from the Proxmox host. From the guest machines too. The guest machines should use the PfSense (cloud server) as a gateway to the Internet and for routing. I can ping...

Moin! Ich habe bei Hetzner einen CloudServer & einen Dedicated. Auf dem Cloud-Server läuft eine pfSense. Diese läuft dort da alles über diese gehen soll damit z.B. Proxmox nicht von extern erreichbar ist & ich Portforwardings, VPN usw dort sehr gut regulieren kann. Plan ist folgender: Wenn...

so I have a problem where randomly vms switch external access like vm with ID 100 i can connect with no problems for some time till randomly i cannot anymore but i can connect vm with id of 101 there is no pattern to this as of right now and there is only one way to force it to switch it back to...

Hi, Ich bin dabei das erste mal ein proxmox server aufzusetzen und habe mich jetzt bisschen in die netzwerk config eingelesen. ich will bloß auf Nummer sicher gehen das alles was ich da so getippert habe oder copiert habe, auch sinn macht. auto lo iface lo inet loopback iface lo inet6...

I have a problem where the vm(s) i create are not able to connect ot the internet i use a dedicated server from hetzner the vmbr1 - * are vlan tests that aren't connected to the vm(s)