dell

Hi, Maybe it could help users using dell poweredge server. Since some months, I have random hang/disk reset on my ceph servers, with non-raid disk only. (poweredge r630, perc h330) I had try to upgrade bios/perc firmware, disk firmware, nothing was working. Last week, I was able to trigger...

hi, i have an issue with a dell r320 server. it works fine with proxmox, but as soon as i have more than 16gb of ram installed the system powers off during linux booting. doing a system check all memory checks are passed successfully. this happens during booting proxmox installation-iso as well...

Hi to everyone!! I'm installing on a brand new Dell T40 with 2x1TB disks a Proxmox 6.2. Before install Proxmox for a USB stick i go to the Dell configuration Utility and create a Raid1 then reboot and put the USB and run proxmox. The first problem is the installer detect both disks and not...

Hi, I work at a local school district and I am trying to setup ISCSI based storage on our newer dell me series san. I have run into several issues while trying to set this up and was hoping that maybe someone could point me in the right direction. In our environment we have 3 hosts with proxmox...

Hello, So I was testing with disk passthrough with my 60tb raid 5 storage on dell 720 server and turns I can pass through the same disk on multiple vms at the same time! I can do r/w on both vms at the same time. I mean is it normal? I tried searching on google but couldn't find any similar...

Hello, We use Dell Compellent as storage for our Proxmox cluster. We plan to implement Dell Compellent Live Volume product on the Compellent. Have anyone ever used this product with a Proxmox cluster? Does anyone have any recommendations? Thank you, Sincerely,

I've finally succeed in installing OMSA on proxmox 6.x and in return for all the information i've found thanks to the community, i wanted to share my findings. Here we go. Be sure to be logged as root at all time : sudo su First, be sure to remove omsa from Proxmox 5.4 before upgrading. apt...

Hallo Proxmox Community, Wir bekommen einen neuen Server mit folgender Ausstattung: Dell PowerEdge R540 über 64GB Ram PERC730+ RAID 4x 960GB SSD SATA Das Ziel ist maximale Performance, auch IO. überwiegend Windows Server VMs, einige Linux Vms. Da die Hardware recht neu ist konnte ich dazu...

Hi, Can I use a Dell Perc H830 RAID Adapter with Proxmox VE? Is this compatible?

I have a Dell MD38xxi SAN which is being used by a cluster of 3 proxmox servers to share storage & provide luns direct to some VM's. Had a few problems recently when adding a fourth proxmox host, so had to completely re-examine my SAN configuration in order to get things fixed. All working...

Hi, I'm looking to install proxmox ve on a Dell PowerEdge R440 with 8 disks of 1 Tb each, 48 Gb of ram. I want to know what is the best RAID configuration for this setup. Thank You!

Hello everyone! I have tried to install proxmox with zfs on a Dell poweredge 730 with a h730 controller. I can not install with the drives in raid mode neither with HBA configuration. I have tried to install it with raid5, I have tried to install it in hba mode and I always have the same...

Hello, I'm using PERC H730P on DELL server and I see my disk in Proxmox GUI but Type: Unknow and SMART Unknow. Anybody know how to resolv this ? Anywhere we can change smartctl command with the -d megaraid parameter ? (I have install megacli-status) thks 4 help Pblou

Hi Anybody has any experience on the m1000 dell chassis with a few m600 blades that i want to set up with proxmox. It's all connected to a SAN with each blade has locally 2x73gb sas disks. How would best practice be to set up and to easy scale up later with more blades? Thanks

Hi, I have installed PROXMOX on a USB and testing it on my server, a DELL PowerEdge T330, and left untouched my first boot partition with Ubuntu 16.04 on it. When I run Ubuntu the machine is very quiet, the fan works apparently in a very low speed at idle. It gets louder only either with load...

Hello everyone, I build a Proxmox 3.4 two node cluster with two Dell R210 and a third node as iscsiTarget. This works still great. I use IDRAC for fencing and DRBD as storage. But after a powerfailure of node1, node2 tries to fence node1 with IDRAC. But IDRAC doesn't really work without power...

Hello I'm reaching out to this community as I'm just starting out with Proxmox and could do with some advise. Does anyone have any experience of using a Dell MD3600i SAN with a Proxmox cluster? We are very early in the planning stage and we are trying to do the best possible setup with...

Hi! We are running PVE 4.2 with two nodes in a cluster: ProLiant DL320 G5p with HDDs, RAM 8 GB and ZFS Dell PowerEdge R530 with SSDs, RAM 16 GB and ZFS Old ProLiant works like a charm. It hosts some 7 light LXC containers and RAM usage is 50% from total. There are no issues with this old...

Trying to passthrough my nic with proxmox for a pfsense vm. I tried to follow this: https://pve.proxmox.com/wiki/Pci_passthrough But when i update grub with GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on" i get the error: "DMAR: Allocating domain for dcdbas failed" and i lose access to the...

We recently upgraded our 4 x members cluster to Proxmox 4.2. All hosts are identical Dell R630's with 256GB RAM, X520 10Gb Nics connected to Dell n4032f switches using a Dell Compellent SC4020 SSD SAN for shared storage. This has been working nicely in 4.1. After the upgrade we experienced...