cpu

  1. VM geekbench 5 score is very low

    Why the guest vms CPU score in geekbench 5 is soo low and not even half of what we are expecting..? Anyone have same issue? We have tried all CPU type like KVM64, Qemu64 ,Host etc. But results not changed https://browser.geekbench.com/v5/cpu/10251369 For these CPU the scores are very low The...
  2. [SOLVED] Processor compatibility mode

    Hello, I'm using proxmox 6.4.13 with Ubuntu 18.04 as VM, Tableau server is installed there. It all worked fine, but the latest upgrade of Tableau is not successful with message: Further explanation on Tableau support is saying: I don't find in proxmox documentation how to configure CPU...
  3. Performance differential between a VM vs LXC?

    Curious: has anyone done an analysis of what the memory and processors utilization differentials are between a virtual machine and an LXC container? I think it would be interesting to see how much more RAM a large and small virtual machine may use compared to both a large and small a container...
  4. VM CPU Performance

    Hi, I've noticed that the CPU performance of the VMs is well below what it should be. I have a newer one that has a CPU with less performance than this newer one, and the VM on geekbench delivers what it should deliver. A VPS on the newer one has less performance than the previous generation...
  5. Hypethreading (SMT) and CPU settings

    Hello, I have Proxmox VE 7.0 running on PC with AMD Threadripper 2920X (12C/24T). SMT (or Hyperthreading) is enabled. CPU has two NUMA nodes. I have two VMs: 1. WIndows 10 VM for gaming and work. 2. Linux VM that is hosting game, web and mail servers. Both VMs have high CPU utilization. Windows...
  6. Get CPU temperature in Proxmox VE

    Hello, I'm trying to get a reading of my cpu temperature but nothing seems to work really in Proxmox. My hardware is as follows: - Ryzen 9 5950X - Gigabyte Auorus B550M Pro-p I have updated everything to the newest state with: apt update apt dist-upgrade apt autoremove Then i tried to get a...
  7. Setting CPU type to anything but Default KVM64 results in boot loop

    I'm very new to Proxmox and Hypervisors in general. VMs install and run with no issues when the CPU type is set to Default KVM64, but setting to Host (or if I specify the processor type as Westmere, which it is, it errors the same way) will result in an error when installing OS after the reboot...
  8. ZFS: Hohe CPU last

    Hi, Ich habe hier noch ein altes Board mit einem Intel J4005 rumliegen und habe als Testsystem Proxmox draufgehauen. Proxmox selbst läuft auf einer NVMe SSD, zudem habe ich eine weitere SATA SSD und eine HDD als ZFS Single Disk hinzugefügt. Bei einem Test via Samba ist mir aufgefallen, dass...
  9. MSWX VM refuses to boot or bootloops on cpu change

    There is one ms windows vm which behaves quite peculiar. Changing the CPU away from anything kvm64 (> host) results in an inability to boot. Even a reboot into safe mode use msconfig does not work as per usual. Despite having configured a windows10 .iso to boot from the 'press any key to boot...
  10. Configure the CPUs assigned to Proxmox

    Hello, I have promox, and I have the following processor: Intel Xeon D-1521, But Promox only detects that I only have 2 threads when I have 8. So I would like to know how to modify this, I have already looked a little on the forum, but found nothing :). I attach you a screenshot of Iscpu Please...
  11. Correct configuration for VM Processors

    Hello, I have Proxmox VE 6.3-3 running on a Dell Server with an Intel® Xeon® Processor E5-2680 v3 (2x 12 core). Hyperthreading is enabled, so a maximum of 48 cores are available. What is the correct configuration to allow a VM to use all 48 cores? I tried setting Sockets to 2 and Cores to 24...
  12. [SOLVED] Ryzen 3 2200G (4 Kerne 3,5GHz)

    Hallo Proxmox Community! Ich habe ein riesen Problem. Mein Proxmox system ist sooo langsam... Ich habe dann Mal in byobu zufällig gesehen dass meine CPU bei 0,5GHz (544MHz) läuft. Egal was auf den VMs bzw auf dem Proxmox passiert selbst wenn er 100% Auslastung hat es bleibt bei 544MHz... Was...
  13. High CPU usage

    Hi, I have only single VM, running with ParrotOs, when i update my system my vm and node freeze like picture: I have Lenovo ThinkCentre M700 with 4 Ram and 150 SSD. Thank you.
  14. Server freezes or restarting automatically (mce: [Hardware Error])

    I got a new server and found some issues during loading and adding new VMs. At first it froze, but after Proxmox upgrading it restarts automatically. It prints 'Start all VMs and Containers' in the tasks. Provider tested its hardware and didn't found any problems. But I can see mce: [Hardware...
  15. Question regarding vCPU for KVM

    We are looking to enable hotplug for the CPU for KVM guests. I've seen that it's only possible with vCPU and not Sockets nor Cores. Assuming the host has 32 cores, would it be best practice to set Sockets: 2 Cores: 16 and set the vCPU to 6 or according to the guest CPU need. If I understand...
  16. [SOLVED] CPU usage with LXC in webui

    Hello, I was under the impression that the reported CPU usage in the webui for LXC is in % but I'm having doubts. According to this picture: is the container using 10% cpu or it has a load of 10 (just like top would report) Thanks
  17. CPU usage in lxc container

    Hi! Some exotic problems arriverd :) Recently i move lxc container from host with pve 4.2-18 to host with pve 6.0-11. Just created new container, then move .raw file from old host to new. I moved 4 containers, 3 works fine, but 1 displays 100% cpu usage by host utils like top or htop. Before...
  18. Strange CPU cores count limitation

    Hello. I already installed macOS using Proxmox on my rig. My CPU is 3rd Threadripper 3960x. I see little lags when I am using macOS and try to find reason. I found here that is not recommended use maximum cores of your CPU for VM (that was my case. I had set 3x16 cores) and now beginning my...
  19. Measuring Co-Stop (vSMP) Usage in Proxmox

    Hey Everyone, Back from ESXi-land with another valuable question, well two in fact. The question in the title is about measuring CPU resource usage in more detail, for example in Proxmox I love that there is an oi-delay counter. Questions: How would one go about measuring something like...
  20. AMD EPYC - Has NUMA ?

    Hello, I`m very confused with NUMA, as I read from docs you have a NUMA capable host if you have multiple CPUs (sockets). However I have installed Proxmox 6.1 (latest) on a AMD EPYC 16 core CPU, and the command to check available numa returns: available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 16...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!