[SOLVED] Replace SSD Raid 1

[AdryMS]

Hello all
My proxmox VE version was 6.3-6 and running as member cluster, i set RAID 1 on my node and when i see status SSD on proxmox interface the health was DEGRADED and just detect 1 SSD on Disk Section, so i think one of my ssd was broken (the SN ssd not showed up on disks interface proxmox)

and my plan was change the SSD, does any config should i change? or just replace the SSD with the same capacity and the raid will rebuilding automatically?
any advice?

 

[ermanishchawla]

if it configured as RAID1 disk at BIOS Level, it will show as Single disk in Proxmox GUI. if it is showing as individual disks, just check whether you configured them as ZFS RAID1 and not Hardware Level RAID1

 

[AdryMS]

if it configured as RAID1 disk at BIOS Level, it will show as Single disk in Proxmox GUI. if it is showing as individual disks, just check whether you configured them as ZFS RAID1 and not Hardware Level RAID1

Thank you for you reply
i was configured RAID 1 while installing proxmox not set on bios, does still need configure on bios first or just replace and will rebuilding automatically?

 

[czechsys]

You have zfs raid, check documentatuon.

 

[ermanishchawla]

Can you share status of zpool status

 

[Dunuin]

Text below "Changing a failed device" might help you.

 

[AdryMS]

You have zfs raid, check documentatuon.

Hmm maybe you was right

Can you share status of zpool status

i think it doesn't matter again, now it works

Text below "Changing a failed device" might help you.

yep thanks for your advice mate