vpn

Hello everyone, I have two proxmox ve 6.2 servers, one in France and one in Germany. I have setup a layer 2 vpn between the two sites (germany site beeing the server by itself [dedicated server hosting solution]). The two servers can contact each other through the vpn lan on all ports. I...

Hello, I was thinking of making a VM that will act as a VPN server and only client's that are connected to the VPN can access Proxmox. I want to setup so that there is no access to Proxmox unless you are connected to the VPN of course the other VM'S need to run normally and need to be...

My Firewall has 5 Interfaces: 3 Interfaces for WAN (External IPs) 1 Interface for LAN (10.0.0.10) 1 Interface for DMZ (192.168.0.10) The OpenVPN Server is listening on tcp Port 443 and udp Port 1194 (WAN Interface) My proxmox Server hast two Interfaces: 1 Interface for LAN (10.0.0.3) 1...

Hello, I have installed Wireguard in Proxmox KVM virtual Ubuntu Machine, because many changes must be do for running it into a lxc container. My Wireguard works fine clients can connect and everything worked. So my Wireguard VM have a network adapter with a public ip address. So I enabled the...

Hi guys I have created a container based on a Debian Buster template to use as a VPN server. The problem I have is that only port 22 is available towards that machine and I'm puzzled on how to solve this (fairly new to Proxmox/containers and Linux is not my strongest point) My Proxmox...

Hey guys, I have been trying to get this to work for several days now, for the life of me i cant figure out whats going wrong. To summaries before details, in Proxmox I have a PFsense VPN client VM that is only for a specific network, If i connect to that network with an AP my phone/laptop can...

So long story short. My ISP blocks ports 80 and 443 so I'm working on getting around that while finding a new ISP. I've got an Azure VM running openvpn access (can do regular openvpn if needed) that I want my VM's to use as WAN so I can access them remotely (through a reverse proxy). Is there a...

Hi, I set up a road warrior L2TP/IPSec VPN on a PFSense firewall and i have 2 users with static IP. Let's say 192.168.1.9 and 192.168.1.10 in an 192.168.1.8/29 network an L2TP server located at 192.168.1.7. No issues with that, i followed the PFSense howto. I connect using the Microsoft Windows...

So right now, I have a working Proxmox VE 5.3 Server (installed on a Dell PowerEdge R710) with several working VMs. Proxmox and the VMs are all setup with HTTPS. Because the Server and VMs are running off a single IP from the Server, I have had to reverse proxy all of the VMs through an Nginx...

Hello, I'm wanting to use ExpressVPN in an Ubuntu container, but I cannot get it to connect. I reached out the ExpressVPN support, and they told me that they don't officially support containers, so they would not help me troubleshoot. Looking at the diagnostics, this stands out to me: ERROR...

hey guys/girls.. I need some help here, I am trying to have a container with IPVANISH running on it. Everything i have looked up on here about VPN's is for access from outside the local network, but i want to have ipvanish running so i can be anonymous when surfing the net or so i can appear...

Hello, which is the correct way to forward all protocols for a specific IP directly to a VM? E.g. JUMPERint=192.168.90.10 JUMPER=8.4.2.3 (official IP, public) iptables -t nat ${PARAM} PREROUTING -d ${JUMPER}/32 -p esp -j DNAT --to-destination ${JUMPERint} iptables -t nat ${PARAM} PREROUTING...

Hey! I want to create a proxmox cluster but don't have the possibility to create a vlan(vrack). I don't want to use the cluster for HA, just for migrating Containers between the nodes. Are there any problems with this or can I just use the external IPs? My second question: What if I have...

I have a Ubuntu VM running under proxmox. I want to use it as a VPN server and have my friends access it. I used the script from PiVPN to setup openVPN . Is there a way I can firewall the server so it can't access the rest of my network?

Hello I'm new, need some help. I am running Proxmox 5.0.23 on my Server and installed Pfsense in a Virtual Machine. Now I use OpenVPN to access some Services in my LAN. Everthing works but Proxmox is not available. I can't ping the IPv4 adress and read something about internal firewall on...

Hello, i've added these settings to CT config: lxc.cgroup.devices.allow: c 10:200 rwm lxc.hook.autodev: sh -c "modprobe tun; cd ${LXC_ROOTFS_MOUNT}/dev; mkdir net; mknod net/tun c 10 200; chmod 0666 net/tun" now when i do pct shutdown <ctid>; pct start <ctid> then tun driver (and openvpn)...

I use proxmox for tinkering around with at home, and for remote access, I rely on an IPSec VPN that's setup through PFSense. When I connect through the VPN remotely, I can access all the hosts on the local network, (i.e., router, DNS, my desktop, file server, etc, etc) However, I CAN'T access...

Hello! I was wondering if there is a way to do this through proxmox (preferably in the webui). I am running an OpenVPN client on the host, and I want to pass the network link it made (tun0) to several LXC containers, not as default but as a secondary link for applications to use when I tell...

Hey all, I'm pretty new to Proxmox and have a question possibly a little over my head, so please bear with me. Basically, I am using Proxmox to run a family of VM's and have them using ExpressVPN to connect to the internet via VPN. An ExpressVPN license gives me 4 simultaneous connections...

Hoping someone would be able to assist, I'm trying to configure a 3 node cluster, 2 nodes on the same physical network, and another node remotely. this other node sits behind a Pfsense firewall that has a site-to-site vpn connection to my pfsense router. i'm able to cluster the first two...