vga

Hello, I use proxmox with kernel: # uname -r 6.8.12-2-pve I have ASUS Radeon RX 7900 XTX TUF Gaming OC 24GB GDDR6 installed in PCI slot From proxmox I can see it as: 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX] (rev c8)...

So i've successfully configured PCI passthrough of my Nvidia GPU to my VM. now i still want to use the Proxmox Host CLI locally via vga output on the server. of course i cant use the nvidia GPU for this since its been passthrough to the VM. i also cant use the motherboard video output since i...

Hi! so I switched back from ESXi to Proxmox and I am now having issues getting video output over VGA/IPMI. The motherboard is the Supermicro H11SSL-i. As soon as a VM starts, the console goes blank. When I look at the syslog, I see the following output: Feb 01 12:42:50 proxmox pvedaemon[4247]...

Hi, this is my first time here. I am trying to install Proxmox 8.0 (proxmox-ve_8.0-2.iso) and I have issues. I have verified the GPG signature and checksums before flashing the USB drive. 1. My LCD monitor displays an error message about input timing as soon as I start the installation. I...

Installer (Proxmox VE 7.1 ISO Installer) does not load on an old but working HP Z230 SFF. I've tried different vga=791 type of modes combined with or without nomodeset but nothing seems to work. I see the grub menu and then either nothing or X does not start. When I try to configure a custom...

Hi everyone, I have my PROXMOX server installed on a intel nuc10i5 8gb ram and two ssds On one Home assistant VM, pihole in a CT and in the second ssd a Ubuntu VM with zoenminder. I tried to passthrough the GPU but when i restarted proxmox, now it's stuck whitout GUI and terminal. Here two...

Spending time on GPU passthrough and seeing it evolve brought forward a topic of people running VM in passthrough with direct output to the screen attached to the GPU. Obviously, this had me wonder if it would be possible to have this one GPU output to multiple screens directly, this card has 1...

Hi, I am new to the whol vm and server world and need your help to get into it. When I am trying to install proxmox (6.1 and 6.2) I get a properly displayed install screen. When I chose install, the console opens up and does something. When it executes all prompts I get into the configure...

I am new to Proxmox and I'm currently trying to get one of my hosts migrated from ESXi over to Proxmox. The sever itself is a HP Microserver N54L. Its only got a VGA port on the back of it. When the server starts booting into Proxmox V6.0 the display complains its gone out of range at the server...

Hallo, ich habe ein Proxmox frisch installiert (EFI-boot, Debian9 mit Upgrade zu Proxmox). In dem Server sind 2 Grafikkarten installiert: - OnBoard (BMC/IPMI): ASPEED AST2400 - PCIe: Nvidia GTX 970 Wenn der Server jetzt startet, werden nach der Auswahl in Grub die Boot-Ausgaben & die Konsole...

I installed Ubuntu Mint as a Virtual machines, but the default resolution is only 800x600. I tried to change the display but there is no option to set a higher resolution. Is there a kernel command line or any other trick to move the resolution to 1280 or higher?

I am passing through a second GPU. The first was successful (Radeon R5 230 and I figured it out on Windows 10 and Ubuntu 18), and so I had the confidence to try again with another card. Another OLDER card. Please check my process on a Nvidia GT218 GeForce on an Ubuntu 18.04 DESKTOP install...

Version: pve-manager/5.2-5/eb24855a (running kernel: 4.15.18-1-pve) /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on video=efifb=off" System Information: Gigabyte Z370 Aorus Gaming 3 Intel i7 8700k 16gb DDR4 SSD nvidia 1070GTX 8gb nvidia 710 1gb I run two virtual...

I have an HP Proliant Gen7 Microserver with 8GB of RAM. I'm trying to install Proxmox from a 8GB USB 2.0 flash drive plugged into the internal USB port. The first time I tried to install Proxmox on it, the installer worked perfectly, but I changed my mind halfway through the installation...

I am using the GPU Seabios PCI PASSTHROUGH method to passthrough an EVGA GTS 450 graphics card: bootdisk: virtio0 cores: 4 memory: 4096 name: MINT hostpci0: 03:00.0,x-vga=on net0: bridge=vmbr0,virtio=36:30:64:33:65:65 numa: 0 ostype: l26 serial0: socket smbios1...

Hardware: Motherboard: X10SRH-CLN4F CPU: E5-2648L v3 (ES: Engineering Sample) RAM: DDR4 2133MHZ 1.2V LRDIMM GPU: EVGA GeForce GTS 450 FPB (Free Performance Boost) Images of hardware: http://imgur.com/a/49omH Software: Proxmox Virtual Environment 4.2-2/725d76f0 (pve-manager/4.2-2/725d76f0)...