truenas

Hello, So I am trying to setup a Truenas VM on proxmox and want to pass through a NVME drive I have to it to use as Arc Cache. VM boots fine without the nvme drive passed to it. I have even manage to get it booted up once or twice with the NVME drive so I know its the right device passed...

Hi All,, We have a R7525 Dell server (2 sockets, 64 cores/socket, 2 Ghz base clk, 3.2 Ghz boost clk, 128 GB RAM, 96TB [8TB x 12] 7200 rpm SAS HDD, Dell BOSS S1 SSD 240G RAID1 boot, H745 PERC RAID controller with PCIe 4.0 bus. 2 x 2 raiser slots are available, one is having H745 RAID...

Hey, I wanted to know if anyone would be able to help me with this? I am trying to upload a .raw zvol to proxmox from truenas scale. I used the dd command to convert the zvol to raw format, downloaded it using FileZilla and upload to proxmox using filezilla. Then used the command "qm...

Hi, I'm new to Proxmox. I've been using TrueNAS scale to run my dockers, VMS, and as a NAS. I wanted to move to Proxmox due to limitations and a few issues. However, I have several dockers that I really really don't want to have to rebuild. I wanted to know if there is a way I can Virtualize...

I have a proxmox host with two built in 10G network cards. It is a new install so it isn't doing much, I have a Linux Ubuntu VM and a TrueNAS, netiher in production. I started to test performance on my TrueNAS and noticed it was really slow. 29MB/s on my primary nic (1G), where as testing the...

I'm using a TrueNAS VM for network shares and some of my containers use network folders in that VM. So I mount the shares in Proxmox and bind mount & remap uid/gid's in my unprivileged containers. This works fine unless I reboot. Proxmox fails to mount these folders since the VM hasn't started...

Hello, I have a server with ECC RAM and multiple disks, means it's equipped like a NAS. However, I want to install Proxmox and run a VM with TrueNAS Core. All relevant disks (e.g. WD Red) will be configured as passthrough for this VM. Then in TrueNAS Core I will configure these drives for ZFS...

Hi everyone I have a problem with my Proxmox host. I needed to change the SMB IP share So I went to /etc/pve/storage.cfg and changed the address, since then only problems... It seems that the share connects and then immediately disconnects. So because of this I just completely deleted the...

This is my first post here so please be gentle. I'm very new to Proxmox. I was a TrueNAS fanboy, but have decided to switch to Proxmox because of how well it handles containers and VMs. So, I have a Dell Poweredge R720 with the H310 controller in IT mode. In a nutshell, I have four WD red 4TB...

Hi I have a Proxmox cluster of three servers, a TrueNAS (Storage) as VM and other network storage and a TrueNAS(Backup) server that is used to backup the TrueNAS storage server via ZFS Replication. So currently my Proxmox VM are not really backuped besides their storage, so I wanted to look...

Derzeit haben wir Probleme mit unserem Netzwerk und wir vermuten, dass es mit der Vernetzung des Clusters+Storage zusammenhängt. Hier einmal unser Setup: Wir besitzen ein PVE Cluster bestehend aus 3 Nodes. Diese Nodes besitzen alle eine 1G Onboard-Schnittstelle und haben alle jeweils eine...

Hello, I have been able to install Proxmox VE and get a TrueNas VM up and running. However I am facing an issues with the Disks disappearing. Once the Proxmox starts, I am able to see all my disks (2 - 150 GB disks, 2 - 1 TB disks, 1 - 5 TB disks) under disks section in Proxmox. However once I...

I find many simmilar posts here, but still can get answer on my question . Our case is - truenas is running as VM inside proxmox. We have DELL 640 with HBA, DELL enterprise SSDs. On truenas is configured VM pool and shared as NFS storage to Proxmox. Everything is working, but performance is...

Uploaded 66 chunks in 5 seconds. Time per request: 82194 microseconds. TLS speed: 51.03 MB/s SHA256 speed: 273.01 MB/s Compression speed: 552.43 MB/s Decompress speed: 972.39 MB/s AES256/GCM speed: 82.09 MB/s Verify speed: 136.66 MB/s ┌───────────────────────────────────┬───────────────────┐ │...

Hallo, ich habe vor, in meinem PVE eine VM mit OPNsense und eine VM mit TrueNAS aufzubauen. Über die OPNsense möchte ich den Netzwerktraffik der Workstations und weiterer VMs zum Router leiten und TrueNAS soll der zentrale Datenspeicher werden. Wie sind da eure Erfahrungen? Ist das...

Hi, all: I have an existing truenas installation on my R720 that I am trying to migrate to proxmox. Truenas is installed on 2 of the SSDs attached to the H710p mini that I have flashed to IT mode. Typically I boot from this on my server to run truenas. I recently added 2 SD cards and installed...

Dear Sirs, I am not an IT expert but have implemented a TrueNAS server using information gathered from the Internet. Currently, we are running TrueNAS storage in the following environment. ⦁ 1 X AMD Ryzen 5 3600 ⦁ 1 X MSI B550 Gaming Plus ⦁ 2 X VENGEANCE® LPX 16GB DDR4 ⦁ 1 X 2GB...

Hi all! This is my first post to the forum, though I've been a lurker for years as I sharpen my Proxmox skills. I'm currently working on getting MPIO and ALUA working with a TrueNAS Enterprise HA unit. I'm using TheGrandWazoo's freenas-proxmox plugin for WebGUI integration with TrueNAS...

After sorta getting bored, I wanted to try something new. And I wasn't super happy with a 3 node CEPH cluster even on a 10GBe storage backend. although the flexibility was very nice. Things still felt slightly laggy, so I decided to venture out. Prior to moving on I was running OMV 5.x and...

Hi! I'm trying to pass through a SATA controller, so that it is available to a TrueNAS VM. I think this is more difficult than it should be due to the device being embedded on the motherboard itself. The problem is that although the VM can see the PCI device(s) the HDDs are not recognized. On...