ssd

What is the impact of PVE hard disk wearout 100%? How is the wearout value calculated and is there any basis for it?

Let's say I have a Proxmox system with a 8 TB VM (to store all my data, e.g. photos, videos, music etc.) on a 8 TB SSD How much storage would a backup server need to back that VM up? Would another 8 TB SSD suffice? Or do the backups require even more space? (I don't need to keep multiple...

Hello everyone, I am struggling with some two-disks configuration for VM using Proxmox. I have a nettop PC that has two disks slots, in each the nvme SSD is connected. Proxmox is running on that nettop, installed on first drive. I have one VM on which Ubuntu is running an application. The first...

Hello ! I am receiving a lot of email about Offline_Uncorrectable in my SSD, in different servers and multiple devices. The following warning/error was logged by the smartd daemon: Device: /dev/sdc [SAT], 16 Offline uncorrectable sectors Device info: HFS1T9G32FEH-BA10A...

Hi, I've seen few threads about cloning the boot disks to another disk/SSD, some used clonezilla (which, as of this moment, still having problems cloning the Proxmox boot SSD), some use dd. My problem is a bit different: I have a cluster of 3 nodes (prox,prox2,prox3, I've created the cluster...

Hi, i'd like to know if there i any way to use spindown easily in proxmox ? I'm running a vm with TrueNAS and i gave him basically all my disk and the whole server at best consume 80w wich is quite a lot and i really want to try my best to drop down the consumption. But after seeing some article...

I'm a little bit lost again, I've set up a ThinkCentre Tiny M900 with a WD SN570 NVMe SSD and installed Proxmox. It uses to run without any problems for days, sometimes for weeks and suddenly the LXCs are malfunctioning, the host system as well. SSH access is not possible anymore, nor is the...

Hey all, I repurposed one of my windows machines into a proxmox box, but it never recognized the 512GB NVMe drive. And it doesn't seem to even be aware of the fact that the NVMe drive exists. lspci and lsblk return no mentions of any NVMe slot/drive, but the UEFI can see the NVMe, and I can even...

Hallo Community, ich stehe vor einem Problem und hoffe auf eure Unterstützung. Ich habe kürzlich eine SSD in meinen Laptop eingebaut, auf der ein Proxmox-Server installiert war. Alles funktionierte einwandfrei, bis ich die SSD in einen anderen PC eingebaut habe. Seitdem habe ich keine...

Hallo, ich habe Proxmox aktuell auf einem Intel NUC laufen, allerdings ist die interne SSD nur 128 GB groß und wird bereits fast komplett ausgereizt. Deswegen möchte ich stattdessen eine SSD mit 256 GB, die ich noch herumliegen habe, benutzen. Dazu klone ich die 128-SSD mittels Clonezilla...

I have some used server hardware I'm looking to acquire for new homelab Proxmox hosts. The only issue is that there are no hardware raid controllers in these machines. The servers however have room for two SSD's internally. I would like to install Promxox onto an SSD on Sata I and then mirror...

Hi, I've been reading about others facing a similar issue but I wanted to share mine and see if there is any solution to it. I could not find a solution that I would understand or implement so far... Sorry if it's obvious but please help! I run proxmox for a while now. In Aug 2022 I bought two...

Hello guys, I got this new server and each node has 6 Drives, and I will have one NVME for the OS installation. Should I use ceph or ZFS? What raid do you guys suggest in case of ZFS. Each drive is 1TB SAS enterprise SSD.

As I have watched how my Firecuda 530 drives get burned through (7% wear currently, accumulated in 18 months) I have started the process of finding alternatives. It is easy to find U.3 and U.2 drives for my needs, but I'd rather stay with M.2 (reasoning below). E1.S would also be an option if...

for my VMs and CTs I use a zfs pool of Samsung Evo SSDs. I've been running this one for a few years now. but today I found out that I can't create new VMs or CTs on this pool. Moving to this pool is also no longer possible. I get the following message: cannot share...

Sorry for reposting as last one got "Awaiting approval before being displayed publicly." I'm running proxmox on 2 NVME 512GB sticks with zfs raid1 pool (ashift=12). I have written a small script that will measure number of writes per hour (in MB) using smartctl command (src: Github). I have a...

Hello, I have a quick question. My Proxmox is running on an Intel NUC11 with an internal 1TB SSD. Now I would like to add an additional external SSD (via USB) that is available for data VM/LXC overlapping. Data from Frigate, Nextcloud, Ovm, etc. What is the right way to integrate this new SSD?

Hallo, ich habe mir leider meinen Proxmox Server beim rumprobieren zerschossen. Daher musste ich Proxmox leider neu installieren. Glücklicherweise, waren alle wichtigen Daten auf einer zweiten Festplatte die in das System ein gebunden war. Auf der SSD hatten drei VMs einen zusätzlichen...

Hi, i have a test server with 2 M.2 256GB. The proxmox is installed on these SSDs. There are also 4x 1TB SSD SATA disks which i can't access by proxmox v8. lsblk gives me the following output: sda 8:0 0 223.6G 0 disk ├─sda1 8:1 0 1007K 0 part ├─sda2 8:2 0 1G 0...

Hi all, i'm all to new proxmox so bare with me with my very limited knowlegde. I have recently installed proxmox 8 on my server dell r730 cpu: 2x 2680v4 xeon (14 core/28 threads each) 320gb ecc ram root disk, 1 disk zfs - Intel D3-S4610 Series - model: SSDSC2KG480G8 ( purely for proxmox ) 1x...