pfsense

Hello all, I have a network setup that includes multiple Proxmox servers and a virtualized pfSense firewall. I've configured a VPN via pfSense to access my local network remotely. While I can successfully connect to the VPN and access certain devices, I'm facing issues when trying to access my...

Hi All, I am trying to get a pfsense router running as a VM to have more control over the stuff I run on my network. I got Pfsense up and running; however, I am encountering an issue. Have pfsense connected to its own Network interfaces in the form of a dual intel 2.5Gb NIC plugged into my...

Hello, I have an issue with a VLAN I created in pfSense (bare metal) and I just can't figure out what is wrong in Proxmox. I have a freshly created Ubuntu VM (with only docker installed), I have created a new vmbr1 bridge that is VLAN aware and assigned it the VLAN subnet (not sure if current...

Hello, I´m really having trouble setting up a vLAN in/on PVE and make it available to the firewall and give access to WAN. Setup: pfSense Firewall with public IP and 2 physical interfaces (WAN and LAN) WAN provides Internet LAN Network 10.27.126.0/24 (Intern IP: 10.27.126.1) An PVE Instance...

Hallo zusammen, ich habe folgendes Problem: Mein Homeserver wo auch Proxmox und pfsense installiert ist hat 4 x GB Lan Anschlüsse ( PCI Karte ). Allerdings habe ich das Problem, dass Proxmox keine Internet Verbindung hat aber Pfsense in VM hat eine Internet Verbindung. Das 2. Problem ist, wenn...

I have a Pfsense running in Tyan 52 Node, In the Tyan 52 Node, It has vmbr0 connected to the 10.1.1.0/24 network which is the WAN, and vmbr1, connected to the internal switch for 10.1.2.0/24 on the LAN As you can see on the image, I have 2 VLAN running in the LAN, it works as intended in the...

I have a proxmox cluster, I am trying to set up a PFSense VM, so that I can set up an isolated network of Windows VMs. My address range of the cluster is 192.168.80.0/24. I am trying to set up an address range for the Windows VM network of 10.0.0.0/24. I have set up PFSense with two...

Hello proxmox users and staff. I do not know how to configure so that my router VPS (which has IPs) GRE's to pfSense which will then shoot the GRE tunnels to my local servers, etc 10.0.0.2 and 10.0.0.3 Do anyone have a useful guide on how to do GRE (debian 11) to pfSense? I know that this...

Hi, I've got proxmox host running on a PC with single network interface. Inside, there are three linux VMs. Each one has network interface of virtio type. It worked just fine with Netgear Orbi Pro router. All hosts are located in one subnet, there are no VLANs. I switched to pfSense router...

Hello, i installed a Pfsense 2.6 in proxmox 7.4 ( Edge configuration), routing all Wan trafic to Pfsense and add some rules after activating the rules i had this issue : failed waiting for client: timed out TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/proxmox-01 --perm Sys.Console...

I'm very new to Proxmox, PFSense and just networking in general, but I wanted to get my hands dirty setting up my own router. I've installed Proxmox VE on a Dell Optiplex that I got, along with an 1Gig, 4port Intel NIC that was recommended by the PFSense forums. Installed PFSense too and that...

Hi everyone, I have a question about using Proxmox and OpenVPN together. Here's the scenario: I have an OpenVPN server in Germany and a Proxmox server in Hungary. The goal is to enable users to connect to the German OpenVPN server and have their requests forwarded to a virtual machine running...

I need a suggestion on how best to organize my server. I plan to access some of my VMs from outside and use Cloudflare Zero Trust service for that. I tested it on my PC and dockers and other devices on my LAN like NAS, camera and it works amazing. As my root router I will have pfSense CT and...

Hey, Ich habe jetzt in den letzten tage so viele Beiträge gelesen und getestet aber noch bin ich nicht am ziel wie erwartet. So kommen wir mal zum Problem: Ich habe eine Haupt IP nenne wir die mal <1>.244 und habe mir jetzt eine einzelne Zusatz IP gekauft die wir <2>.253 nennen. Das Problem ist...

Hello, I've already posted on the Netgate forum on the same subject, but I'll try here if the problem is with Proxmox. I'm currently trying to understand a strange behavior with my pfSense CE 2.6 virtualized on Proxmox VE 7.4-3. I've been tearing my hair out for days now. :D My ISP router...

Hello, I'm encountering an issue with accessing the web interface of my Proxmox server. Here's my setup: I have a Dell R710 server running the latest version of Proxmox, and I recently installed pfSense as a VM on it. Currently, pfSense is the only VM running, and it is connected to the...

I’m running a PVE host with 2 NICs. The intent is to run host management via the LAN/WAN1 (192.168.2.100) and have the VM’s using WAN2. Basically my VMs should have a different public ip has the host But they should be reachable via the LAN so i can ssh into them. The host is managed via the...

Hi there, I'm trying to connect my second proxmox host to a separate WAN for its VMs, but I need help. I'm using the configuration as described in the attachment. I've two proxmox hosts; a. PVE01 is connected directly to LAN/WAN1 using DHCP and Firewall from the ISP modem. So all VMs are...

Hi there, My ISP changed my router two days ago and gave me four public WAN IPs (x.x.169.149-x.x.169.152). So I want to run multiple proxmox hosts where the VMs use these 4 WAN IPs. I've installed pfsense on one proxmox host, which works on the main WAN IP (x.x.169.149). But I need to...

Hi to all, After struggling with briding WAN/LAN in pfsense/OPNSense VM I decided to use NIC passthrough for my LAN interface. I had heavy packet loss when using bridge LAN interface in pfsense/OPNsense, this topic on reddit gave me hints and I had no more issues after using NIC passthrough for...