pbs

Hello all, I've followed the guide at https://github.com/inettgmbh/fail2ban-proxmox-backup-server to set up fail2ban for PBS. Couple of issues with this, but the one I'm currently trying to sort out is why failed attempts via the PBS gui aren't recorded in...

Recently, there have been regular (once a few days, sometimes once a day) backup failures on proxmox backup server. The log is below, in general, the machine is locked and has not been unblocked after. Subsequent viral machines are also all failed (Permission denied). What can I do, do I need...

Good Day, we have a new Proxmox Node with High Storage KVM Servers. Connected to the PBS Server with 2x10G active-backup Bond Setup is : AMD EPYC 7443P 24-Core Processor 512 GB RAM RaidZ2 with 8x 20TB HDD and 2x 3,84 TB SSD Raid1 as a META Devices. The VM's have 30 TB in some cases. If we...

Now I have a server on it 2 ssd drives - pve + pbs in parallel 6 disks for backup, with pbs 4 disks for storage (on pve there is a windows server with AD, for storage. It has only files, all virtual machines on SSD My question is this. Here, for example, my pve+pds breaks, or the disk fails, I...

Hi. My setup is made by a small 3 nodes PVE cluster, a PBS for storing backups from PVE and a second PBS syncing the main data store in the first PBS. I use Icinga2 to monitor the health of my setup. No problem monitoring PVE by using check_pve. I want to use Icinga2 to monitor the status of...

I discovered during the backup that if several nodes are selected in the backup schedule, then several backup tasks are created that start running simultaneously. The storage goes up to 10 Gbps, but currently, a server with a virtual machine with pbs has a 1 Gbps channel. I plan to eliminate...

hello, tell me please, is it possible to simultaneously run the task of verifying backups at the time when new backups are being made, similarly with the task of garbage collection just noticed that I have a lot of backups in an error state, while backups are made every day and their number is...

Hi all, We have been using your products in our company for many years. Not long ago, we completely renovated the entire server infrastructure. So far there are 9 PVE with 3 PMG clusters on VM and standalone physical server - PBS 3.0-1 We have a problem with backups. Every day we need to back...

Hallo zusammen, ich hätte eine Frage bezüglich der Speicher/Disks bei Proxmox Backup Server. Bisher haben wir bei einem normalen NFS Backupserver die Festplatten verschlüsselt (cryptsetup), auf dem die Backups abgelegt worden sind (eigenes Raid). Nach einem Reboot wird dann nach der passphrase...

Guten Morgen, aktuell bin ich dabei eine Art Offsite Backup zu organisieren. Habe dazu eine Hetzner Storage Box angeschafft und diese per fstab direkt an den Backup Server gemountet. Danach bin ich hingegangen und habe diesen im Proxmox Datacenter als Storage hinzugefügt. Da die...

Hello, we have a weird phenomen on our two backup servers running version 2.4.2 and all packages up-to-date. Our daily verification job that starts running at 02:00 ends up with the status 'unknown' at 00:00. The job actually seems to need more than one day to complete because of our file...

Hello, I've checked the NFS settings in Synology multiple times. When I connect to Proxmox Backup Server via SSH and run the "mount" command, it always gives a "connection timed out" error. When I run the same mount command on Ubuntu 22.04 server, it connects immediately without any problems. I...

Good morning, this is for preparation of a desaster recovery, I am just evaluating ways to handle a problematic situation. Let's assume I have a dead PVE a working PBS another PVE Node (in another unrelated Cluster) to run a restored VM; already connected to PBS - but with a different...

I have a locally hosted lab setup consisting of PVE 7.4-15 which in turn is running a VM of PBS 3.0-1 called "backup.local". PVE is also running a few other VMs and LXCs. I have a relatively slow 60mbit/20mbit FTTC connection to my lab. I've tested this and verified that I'm getting close to...

Hello, I am using Proxmox VE with Proxmox Backup Server My backup process is built on an internal 10 gigabit network, I also use ZFS for Proxmox Backup Server with 32GB memory allocation for ARC Storage capacity 47 TB of which 40TB is occupied RAM 64GB CPU: Intel(R) Xeon(R) CPU E5-2620 v4 @...

Hi, I am trying to release space in the backup server and removed some backups, but still, there are no changes, also, since the disk is 100% used, I am not able to initiate the prune job Anyone can advise on this? Thank you.

Hi everyone, I'm hoping someone can help me, however i've spent the last 3 hours trawling though the forums but nothing has worked; Essentially, I reinstalled my PVE cluster earlier this evening so I could deploy PVE8.0. Install complete, fine tuning on the VE side complete so I go to bring...

Hello all, I have a backup of a ct/lxc that is hundreds of GB big - it's stored on my Proxmox Backup Server. Most of the data is stored in a mount point, and I would like to restore the ct/lcx without this mp. Is it possible to restore the ct/lcx without a specific mp or directory path in the...

Hey Folks, Does anybody know how to list the "Notes" inside a Proxmox Backup Datastore from the Command line? This is what I see in the GUI: But when I run the CLI command: $ pvesm list proxmox-backup-01-T7500 I only get the following output...

Hello, I want to store the backups of my PVE encrypted on my PBS. I am now wondering whether the pbs can still run a prune/verify/gc on the backups, since the pbs does not have an encryption key? My second question is whether the backups are still incremental at all?