Hi,
Background:
I ran Proxmox for years on a single node and for some reason which I can't recall, stupid me, renamed the standard logical volume from "data" to something else for the lvm thin pool. It worked all fine...
Now I started to adding some more nodes and face the challenge that all...
Hi Guys, I just want to confirm something. Currently, i have this pve versions proxmox-ve: 7.2-1 (running kernel: 5.15.35-1-pve)
root@c7bc-pve1:~# pveversion -v
proxmox-ve: 7.2-1 (running kernel: 5.15.35-1-pve)
pve-manager: 7.2-4 (running version: 7.2-4/ca9d43cc)
pve-kernel-5.15: 7.2-3...
Hello Support,
I have a cluster made up of two nodes and I would need to migrate the cluster nodes to a new VLAN (changing the IP addressing)
How can I do? Do you have a guided/recommended procedure to follow?
Is there a service interruption?
Thanks
I have a small cluster of just 2 devices, I will be adding a 3rd in the not too distant future.
One of the nodes has 10gb uplink to external, the other only has 1gb. This means that synching between the two is limited to 1GB of course. I've added a 10gb network card to the node with 1GB...
Hi, I'm new to proxmox cluster setup. I've setup a 3 nodes on a cluster with a dedicated network. Recently, one of our nodes crashed and unable to recover (basically it's dead). I want to remove the dead node from the cluster but I'm afraid that it might also broke my other 2 nodes. From the...
Hello,
I'm in the process of planning out a 3-node cluster for failover and high availability and have a question about where to store the VMs. Assume the following;
All servers are on a 10GB backbone
All servers have SSDs for OS and data drives
All 3 PVE nodes are identical. Same...
Good afternoon, I have a question. I did the procedure to delete a node, but the record of the deleted node remains. Is there a way to delete it without damaging the cluster?
Hey how’s it going all,
I’m doing a bit of experimenting and wondering if it’s possible to have several Proxmox nodes each with their own local storage, and the VMs on that storage mirrored/synced onto a shared store; then HA setup so if any Proxmox node goes down, the VM is read/run/hosted...
Hi,
I have a Proxmox cluster with 4 nodes in it. When i want to upgrade one of my node, I dispatch my VMs of the node that I want to upgrade through the other node. Then I upgrade my node and I restart it, and when I restart it the VMs that are in the other node restarts for no reason. So i...
Iam looking to build a "good" Datacenter using Proxmox.
Hardware I have:
2x HPE DL360gen9 | 64GB RAM | 4 x 4 TB HDD | Intel 12 core total
1x HPE DL360gen8 | 32GB RAM | 2 x 2 TB HDD | Intel 20 cores total
With it, Can build an Cluster with “high availability” and backup server?
My 1st idea...
I had a 2-server cluster when I decided to wipe and reset the node that the cluster was hosted on(was having a lot of problems that only a hard wipe would fix) and now I cant get the 2nd node off of the old cluster and onto the new one and on top of that I cant login to the web interface from...
Hello guys,
just a quick question.
We have 2 servers/nodes in our environment, with 2 CPUs/sockets each.
One server has 2xCPUs with 14 cores each (total of 28 cores), and the other server has 2xCPUs with 18 cores each (total of 36 cores).
Now the question:
In the node overview, Proxmox is...
Hello, I have been reading for a long time about the feasibility of being able to install a cluster of 3 servers in different locations linked together by VPN. And I suppose that it is highly inadvisable to establish a cluster connection with a latency of 60-70 ms. Does anyone have a similar...
Hi,
I'm currently running 2 standalone Proxmox 6 nodes and I want them to be part of the same cluster.
Containers' IDs are not overlapping from one node to the other.
Is there a way to create a cluster with those two nodes without dump->transfer->import every container?
Regards
Hello,
We have two nodes that have started to fail when replicating
They used to work fine.
command '/usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=proxmox2' root@10.1.0.241 -- pvesr prepare-local-job 109-0 local-zfs:subvol-109-disk-0 --last_sync 0 --parent_snapname Limpio' failed...
Hi,
ich habe eher aus Experimentierlust mit einem Proxmox-Knoten einen Cluster erstellt.
Ich möchte umziehen auf eine neue Hardware und das schien mir eine gute Idee zu sein :-(.
Nun habe ich ein Cluster mit genau einem Knoten.
Wie setze ich diese Umgebung wieder so zurück, dass die...
Hello i want to ask
i've got 4 nodes on my cluster on ip 10.10.30.x
and i got new hardware on new location using ip 10.10.50.x
does it possible 10.10.50.x join cluster on 10.10.30.x? currently 10.10.50.x only 1 device and i still not create the cluster yet
and i already read the documentation...
I got 3 nodes on my cluster
using 6.3.6 ver proxmox
1 of them sometimes restart randomly, i already check syslog and /var/log/message
my syslog after booting (because syslog before reboot won't show's up)
Mar 17 06:34:35 SVR-22 kernel: Linux version 5.4.103-1-pve (build@pve) (gcc version 8.3.0...
Fresh install of ProxMox version 6.2-4.
I have 2 x 1.2 TB HDD SAS on a Dell R630, mode AHCI, presented directed to OS (NBA) and I choose, at install point of ProxMox - Harddisk option: zfs (RAID1)
At that point I can see: /dev/sda - 1.2Tb and /dev/sdb 1.2 TB
At first login I see that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.