Hello, I have proxmox 4 installed on a hetzner dedicated server I have an ipv4 46.4.90.241 and an ipv6 range 2a01:4f8:140:73dd:: / 64
I can use VMs with network device as NAT mode (using dedicated server ips) I want that each VM has an own ipv6 BUT not an ipv4 , example:
VM 1 windows:
IPv4...
Hello,
i have used pve-zsync to migrate an LXC container from proxmox 4 to proxmox 5.
Now i have this error when i try to add networking card:
failed to open /proc/sys/net/ipv6/conf/veth701i0p/disable_ipv6 for writing: No such file or directory (500)
If i add net card on stopped vps and i try...
I was trying to figure out the new letsencrypt integration, and couldn't get it to work...
Then i noticed this:
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
task\x20U 9499 root 3u IPv4 76078 0t0 TCP *:80 (LISTEN)
task\x20U 9504 root 3u IPv4 76078 0t0 TCP *:80...
Im runing a bare metal proxmox VE 5 with several containers.
The host is connected straight to the firewall/router.
The issue is that the containers arent discoverable on the network and wont get a IP, neither a IPv4 nor a IPv6.
I did assign static IPv4 and IPv6 for all my containers and that...
For network interfaces whose addressing is controlled directly by PVE (i.e., host nodes, containers), there should be an option (enabled by default) for IPv6 privacy extensions. Preferably, this option could be toggled regardless of IPv6 addressing mode (static / SLAAC / DHCP) (on systems using...
Hi,
I am new to Proxmox and used my server hoster's installscript (Hetzner) to install Proxmox on a dedicated machine. For now everything seems fine the only real issue I have: the web interface is only accessible via IPv6. My network interface is up and running with both ipv4 and ipv6...
I'm trying to get pfSense to provide IPv6 address to LXC containers using DHCP but for some reason I can't get it to work.
Do I need to assign the host also with IPv6 address?
Hi,
Ich fasse mal kurz mein setup zusammen. Auf meinem Host läuft aktuell Debian 8.10 mit Proxmox Version 4.4-22/2728f613 und dem PVE kernel 4.4.114-108.
Auf dem host habe ich eine IPv6 route zu einer meiner container eingerichtet. In diesem Container betreibe ich derzeit accel-ppp in einer...
I'll never use IPv6 and want to disable it completely. I don't like having rpcbind or ssh running on both v4 and v6.
I've tried disabling using sysctl but getting errors in the logs from pve-firewall:
iptables_restore_cmdlist: Try `ip6tables-restore -h' or 'ip6tables-restore --help' for...
Having a strange error where the ipv4 dns settings are being forgotten and just left with ipv6? I have to then add the ipv4 address back in before updates work again. ipv4 and ipv6 work fine on the vms, its just Proxmox that loses it. im on pve4 hosted with online.net
I'm trying to add an IPv6 subnet to my proxmox host for use on my VMs. I have the following:
interfaces file:
auto lo
iface lo inet loopback
iface lo inet6 loopback
iface enp7s0f0 inet manual
iface enp7s0f0 inet6 manual
auto vmbr0
iface vmbr0 inet static
address 22.144.64.130
netmask...
Hi
I need to disable ipv6 on a Centos 7 container. But... i cant.
If i modify the /etc/hosts proxmox overrride my config.
How can i disable ipv6?? (im using squid proxy in this container and this make me problems with ipv6))
I dont speak english, thanks to all!
Hi,
I just had a fresh install of Proxmox VE 5.1 (see pveversion -v below) on a couple of R610 with PCI Intel NICs (one ixgbe and one quad-e1000). I tried to move a few VMs from a legacy Proxmox VE 4.x cluster to that new cluster, which is located on the same switch than the legacy one...
Hi
the main question is: where could we hook startup and shutdown scripts for containers in proxmox?
we connect containers to a linux-bridge and then add host-routes with "ip rou add 10.11.22.33/32 dev vmbrXX" on the hypervisor, we also add a host-route within the container direct at the...
Hi,
I have a problem with my IPv6 configuration at OVH France.
After a while, I completely lose the ipv6 on the host, as well as the VMs.
When I connect to the host in ssh and run the command : "ping6 ipv6.google.com"
IPv6 comes back instantly! (even on VMs).
Do you have any idea of a...
Hallo,
ich würde gern bei einem Hetzner Root Server eine VM nur per IPv6 erreichbar machen.
Meine nachfolgende Konfiguration läuft super, wenn man IPv4 und IPv6 gleichzeitig verwendet, wenn man jedoch auf der VM nur IPv6 zur Verfügung stellen möchte, klappt es nicht in der VM...
Die VM hat eine...
Hallo alle zusammen,
ich setze auf dem Host Proxmox 5 VE ein. Auf den VMs benutze ich Debian 9 Stretch.
Problem: Virtuelle Maschine (VM), die im Subnetz 2a01:4f8:c0:17c2::/64 (ipv6) bzw. 88.198.197.24/29 (ipv4) läuft, klappt das Anpingen und die Namensauflösung mit ipv6-Servern nicht. Das...
Hey guys!
So here is our config
A dedicated server at OVH.
Ipv4: for the proxmox host (also has 1 ipv6)
We also have /64 of ipv6.
So OVH blocks NDP, and does not give any Mac address for ipv6.
If we give an IPv4 for a container, we can use ipv6, since it will the ipv4 MAC address.
We want...
Hi,
I'm using Proxmox 5. My provider provides me with 1IPv4 and a /64 IPv6.
I've already managed to create a NAT network to share the IPv4 with containers and VM.
But I don't know how to attribute IPv6 addresses to these containers and VM.
As I have a whole /64 subnet, I suppose I should be...
Does anybody else have this Problem?
Our virtual machines loose their IPv6-connectivity after a period time. To be precise: They loose internet connectivity. They are still able to access neighbors within their broadcast domain. After a direct PING to the public IPv6 address of the Cisco...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.