hang

Hello, I have a problem when backing up to a ceph cluster of spinning disks. I have a cluster of 27 server-class nodes with 60 OSDs on a 10gig network. If I backup ~10 VM/CTs it works fine. Upping that number to ~20 the backup grinds to a halt (write bandwidth in the KB/s range) but...

FYI I run into the problem that moving a vm disk (volume) locally, hangs waiting on fuser process, which never exists. The disk was already copied and available on the target storage and also funcional after killing the fuser process. As a test calling fuser via commandline showed that the...

Hi there, I am using proxmox previously on an Intel platform, with an Intel i7-3770 CPU, and everything was smooth. But since the CPU was broken, I have replace my system to a Ryzen build, with Ryzen 5 3600 and B550. When I try to boot from proxmox, I am stuck on a blank screen with text...

Hi, I've been following the suggestions and steps from the Upgrade_from_6.x_to_7.0 wiki and, right now, I am stuck at 93% for more than an hour or so in the apt dist-upgrade execution. This is what the SSH screen shows now: Setting up libmath-random-isaac-perl (1.004-1.1) ... Setting up g++-10...

I am running 2 unprivileged LXC containers on a proxmox-ve 7.1-1 (running kernel: 5.13.19-3-pve). Both lxc's are running docker. The only "exotic" about it is using Fuse for the docker filesystem. The have nesting,keyctl,fuse,mknod =1. They run fine for hours, sometimes days, but after a while...

Hi there. We have 2 Proxmox clusters. I updated packages on one cluster with no problems. Then I started updating packages on the 2nd cluster, and after I upgraded the 1st node, the whole cluster went berserk. Initially, some of the nodes appeared up, some down, and some with a "?", even...

Hello... I did a package upgrade yesterday 2/6/22 (including kernel update to 5.13.19-4-pve) and it's consistently hanging about 20-30 minutes after boot. Symptoms include: - unresponsive console, does not respond to Ctrl-Alt-Del or ACPI Shutdown. - "qm list" hanging. Some VMs hanging. LXC...

Attempting to halt an OpenMediaVault 5 guest running on Proxmox 7, but the guest vm seems to hang after issuing halt directly on the guest. When on PVE I see, qm list: VMID NAME STATUS MEM(MB) BOOTDISK(GB) PID 111 OpenMediaVault running 24000...

One of my Proxmox hosts randomly loses network for 5-6 seconds at what appears to be random points throughout the day. I am usually using VMs via RDP, and they either pause or disconnect. While investigating the issue I've noticed both pings to and from the host also stop, so it seems to be a...

Hello, i freshly installes my Proxmox. Now i wanted to move my ESX VM's to Proxmox (was alerady working with other Proxmos Hosts). I transfer the .vmdk and .ovf to Proxmox. Than started the qm importovf....., thats starting and working until it reaches 100%. At 100% my complete Proxmox hangs...

Hello, after months i had to do a PVE reboot yesterday. All updates was installed, kernel 5.3.18-3 as well. But kernel 5.3.18-2 was still running. On reboot, machine hang by "loading inital ramdisk". I try starting several times (also with 10 minutes waiting). By manual selecting 5.3.18-2...

Hi everyone, Proxmox and all it's VMs froze earlier today with no way to interact with the system (web interface said that a connection could not be established) so it was hard reset. There are no discernible error messages and it just stops at the end of the following (with a blinking...

Hello, I have built 2 PMG version 6.1-2 on VMWARE and running cluster for them Both server usually crash and hang, I don't know the reason I have checked kern.log but can't figure out any issue Anybody help me :((

Hello, everybody! Serious trouble. `ceph status` hangs, every ceph command hangs! PVE shows "got timeout" reinstalled the node, tried to join the node just by copying keys, but could not create monitor (error: monitor existed), then I removed the monitor from monmap, and that's it all...

I having issue with some VMs, which looks that networking interface gets hibernate and when I ping from VM to anywhere or restart networking , the interface starts working again. IS Anyone having the same issue?

I'm unable to apply updates on my Proxmox server. Currently running: Linux pve 5.0.21-1-pve #1 SMP PVE 5.0.21-2 (Wed, 28 Aug 2019 15:12:18 +0200) x86_64 GNU/Linux Attempts to apply updates fail as follow: root@pve:/boot/grub# apt update Hit:1 http://download.proxmox.com/debian buster InRelease...

Hi, I have a Intel Pentium N4200 (HD Graphics 505) PC where I'm running Proxmox. I'm trying to use the Mediated GPU feature (i915-GVTg) on my machine. I tested with Linux and Windows and in both cases I get the following message in the Host (Proxmox): ... [ 144.757656] i915 0000:00:02.0...

Hello everyone, i'd like to ask for help regarding a problem i recently got my hands on. We're running 3 Proxmox clusters over 3 datacenters. Backup routines run by night for all 3 clusters. Backups are done via CIFS and also NFS. From time to time i'm running into a problem, where the...

Hello, I've recently have an issue where rollbacking a snapshot never completed and is stuck in 'D' state root 26279 0.0 0.0 35188 3024 ? D 09:50 0:00 zfs rollback rpool/data/subvol-104-disk-1@initialsetup I'm trying to figure out what might have cause this as I've done...

Hi there! I'm attempting to configure dual GPU passhtrough to two guest Win10 VMs. I managed to pass the first GPU to a Win10 guest just fine (GTX 750Ti). I then decided to add the second GPU (GTX980), so I included its IDs to "/etc/modprobe.d/vfio.conf" and rebooted the server as per the...