gpu passthough

I try to get my system running and passing through my GPU to a windows VM. After reading all the gazillion tutorials and what not... it seems I figured out a config that works (on my system). The final comannd that I was looking for is echo efi-framebuffer.0 >...

My goal is to connect my GPU (RX 580 4gb) to the VM so that I use the VM on host PC with it. I set display to none and in hardware connected PCI Device (GPU). But when I try to startup the VM, I get this response: Any idea how to fix this? In advance, thanks for your response.

I configured GPU passthrough in Proxmox, and a VM to use the PCIe GPU. The VM is set to boot at startup. I don’t want to access the VM remotely, and I was expecting to see the VM’s GPU output directly on the Proxmox monitor. It works but with an annoying workaround. The only way to achieve...

Hello, I have been trying to passthrough GTX 560ti for more than 3 hours and I can't figure it out. When I try to boot my VM, it never boots up. If I remove "x-vga=1" from the hostpci, then the VM boots, but I can't install drivers because I get error code 43. I don't get any video output from...

Hi, I recently tried gpu passthrough another time, but when I launch the VM via the web interface it doesn't start and proxmox freezes, I need to press the reset switch to get proxmox running again. I have a ryzen 5 3600 in my server. I'm trying to passthrough a gtx 1060 and rtx 3070...

Hallo Community... ich bin relativ neu in der Proxmox Server Scene. Ich habe mir etwas kompliziert einen MAC vitualisiert. Doch dieser ist mit etwas mehr als 7MB Grafik Speicher etwas Mau. Jetzt würde ich gerne meine Graka dem Mac geben. Diese ist wie gesagt eine NVIDIA GTX 1050Ti mit einem...

Ich habe diese Anleitung befolgt um GPU Passthrough mit einer GTX 760 zu machen. Diese hat dann ein Code 43 Error in Windows gezeigt. Nun habe ich es mit einer 1050 TI Probiert und diese hat ein Timeout. Was mache ich Falsch? qm start 4096 start failed: command '/usr/bin/kvm -id 4096 -name...

Since windows 10 home disabled RDP :'( i was wondering how else to get smooth gaming performance inside the windows VM. By adding a GPU to the VM, would that increase the FPS connection for smoother gaming? What other remote desktop protocols is best for gaming from a linux host to the windows...

Hi everyone! I recently install Macos Monterey on Proxmox 7, everything is fine, i can install it without problem. I use OpenCore and setup OVMF as Bios. The problem is, when i try to passing my GPU to MacOS, i've got a blank screens, nothing happen... But VM start properly ( i guess cause it...

Hi All i am really new with proxmox so i am testing actually the possibilities. Shortly to my setup and what i plan to do: VM 1 Windows 11 with 2080 TI passthrough (already setup and working fine) VM 2 MacOS 12 with RX 580 passthrough (vm set up and working) Used Hardware: Asus B550 Gaming...

Hi, the VM starts, but I cannot connect to it (through remote desktop). I followed this guide https://www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/ and added my rom, but it wasn't working without adding the rom as well... It is a RTX3080 and the mobo...

I'm trying to spin up a Debian VM with GPU passthrough. Everything seems to have worked correctly except I cannot connect to the console: "VM 69420 qmp command 'set_password' failed - Could not set password" I have also tried to connect a monitor directly to the VGA port of the card but didn't...

Does anyone know a way to do either the following…. 1. Reattach the gpu to the host when a VM shuts down 2. Automatically start a VM when a particular VM shuts down? I’m attempting to give a gpu back to the host for console display when a be shuts down or start a vm when one shuts down...

Hi everyone, I tried to solve this problem over weeks and weeks, performed so many Windows 10 installations, even a complete proxmox reinstall but nothin helped. What I already did: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on" in /etc/default/grub and update-grub after reboot dmesg | grep...

Dear all, In the past this configuration of GPU passthrough worked. Except the hardware has been upgraded slightly (Ryzen 5900x, RTX3070). The IOMMU groups are good and vfio drivers are loaded. Whenever I boot the VM it successfully boots (at least according to the GUI). However this is a...

Hi! I recently have downloaded proxmox on my pc and I have to some problems with gpu passthough. For context, I have a amd 5800X cpu paired with a rtx 2060s and a amd RX540. What I want to do it to run the server headless and control it through the web browser and have the other 2 gpus passed...

Hello world! I am trying my hand at a slightly unusual set-up of Proxmox. For my home desktop (Intel X99 plattform) I want to run Proxmox headless and instead give the main graphics card (AMD R9 380x Nitro in Slot 1) to a Linux VM and the second graphics card (NVIDIA GeForce GTX 980Ti) to a...

Hi All, I have already looked at here and here and tried everything but I am still getting the blank screen on my monitor. My VM config: cat /etc/modprobe.d/vfio.conf options vfio-pci ids=10de:1cb2,10de:0fb9,10de:1c03,10de:10f1 disable_vga=1 root@pve:~# cd /etc/pve/qemu-server...

Hello. This is the story about my expirience with laptop GPU Passthrought to virtual machine. I used Clevo N957TC laptop (aka Hasee ZX7-CT5DA) and Proxmox 7.0-8. As u can see at system block diagramm GPU of Laptop has personal video-out (HDMI and DP). I connected a monitor via HDMI. The first...

I followed this guide on Reddit: https://www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/ Everything was successful, no errors. But then when I went to start the VM, Proxmox stops responding. Website goes down, VMs, can't SSH, it was just a hard crash...