gpu passthough

I'm trying to spin up a Debian VM with GPU passthrough. Everything seems to have worked correctly except I cannot connect to the console: "VM 69420 qmp command 'set_password' failed - Could not set password" I have also tried to connect a monitor directly to the VGA port of the card but didn't...

Does anyone know a way to do either the following…. 1. Reattach the gpu to the host when a VM shuts down 2. Automatically start a VM when a particular VM shuts down? I’m attempting to give a gpu back to the host for console display when a be shuts down or start a vm when one shuts down...

Hi everyone, I tried to solve this problem over weeks and weeks, performed so many Windows 10 installations, even a complete proxmox reinstall but nothin helped. What I already did: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on" in /etc/default/grub and update-grub after reboot dmesg | grep...

Dear all, In the past this configuration of GPU passthrough worked. Except the hardware has been upgraded slightly (Ryzen 5900x, RTX3070). The IOMMU groups are good and vfio drivers are loaded. Whenever I boot the VM it successfully boots (at least according to the GUI). However this is a...

Hi! I recently have downloaded proxmox on my pc and I have to some problems with gpu passthough. For context, I have a amd 5800X cpu paired with a rtx 2060s and a amd RX540. What I want to do it to run the server headless and control it through the web browser and have the other 2 gpus passed...

Hello world! I am trying my hand at a slightly unusual set-up of Proxmox. For my home desktop (Intel X99 plattform) I want to run Proxmox headless and instead give the main graphics card (AMD R9 380x Nitro in Slot 1) to a Linux VM and the second graphics card (NVIDIA GeForce GTX 980Ti) to a...

Hi All, I have already looked at here and here and tried everything but I am still getting the blank screen on my monitor. My VM config: cat /etc/modprobe.d/vfio.conf options vfio-pci ids=10de:1cb2,10de:0fb9,10de:1c03,10de:10f1 disable_vga=1 root@pve:~# cd /etc/pve/qemu-server...

Hello. This is the story about my expirience with laptop GPU Passthrought to virtual machine. I used Clevo N957TC laptop (aka Hasee ZX7-CT5DA) and Proxmox 7.0-8. As u can see at system block diagramm GPU of Laptop has personal video-out (HDMI and DP). I connected a monitor via HDMI. The first...

I followed this guide on Reddit: https://www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/ Everything was successful, no errors. But then when I went to start the VM, Proxmox stops responding. Website goes down, VMs, can't SSH, it was just a hard crash...

so right now I am in a situation where I installed a gpu and memory to my proxmox server, but not able to access the web gui or ssh, or use the gpu output. I am wondering is there another way to get into the proxmox? I did the gpu passthrough steps on here...

Hey folks, Owner of a Dell R720 running Proxmox 6.4-13. I have installed an Nvidia Quadro P400 and am looking to get GPU passthrough working on either a Windows 10 VM or a Debian-based Linux VM. I have followed the steps associated with GPU passthrough outlined on the Proxmox website but have...

Hi, I got very easily with my old Amd radeon hd 7780 graphics card the passthrough gpu, but now I have a msi geforce rtx 2060 ventus gp oc and I do all the steps, the machine boots but does not give video signal. For my old card I had no problem. I am going to post my settings. I hope someone...

Hi everyone, I was able to set a vm with gpu passthrough and use it for quite a while now. Until now i was also quite happy with the performance. However some games (ori and the will of the whisps, RE Village) the performance drops to 5 fps. Other games run with 120fps without any problems. My...

Hi I am running Proxmox VE 6.4-6 in one of my old desktop with the following configuration. MSI Motherboard: H310M PRO-M2 (MS-7B28) Processor: Intel i5 - 8600K GPU: GeForce GT 710B I have enabled Intel VT-d from motherboard. I am running few VMs and one of them is a Kali linux box. I am...

Hi, I installed a second Quadro card in the host to passthrough to a VM. However, there is an Interrupt Request (IRQ) collision between the Quadro K4200 and the SM Bus Controller that I do not know how to solve. Followed the PCI-Passthrough procedure from...

Hi I am running Proxmox VE 6.4-6 on a old desktop with Intel i7 - 4790 processor. I have successfully created few LXC container and ubuntu virtual machines. They are working like charm. I also have created a windows10 - pro vm and it also worked fine. Now I have a GTX 750 card installed in one...

hi fellow Proxmoxers, It seems my old DELL server will not work with a GPU passthrough in UEFI mode. I have successfully configured the passthrough in Legacy Bios (on the host) but on a new Proxmox install on the same machine with UEFI I cant get it to work. In fact the host sometimes freezes...

Hi, everyone. I'm trying to pass my IGPU to VM. Currently for Windows and then MacOS (for Windows it's just for testing it works) For Windows I was able to pass already GPU the GTX 1060 successfully and without much problems, I worked according to a guide available on the internet. I tried to do...

hi, I'm attempting to setup a windows 10 vm with a Radeon pro wx 5100 passed through as the gpu. After following all the steps given in the guide for pci passthrough, I cannot boot the vm after repeatedly getting the error: kvm: -device...

Hi Good morning, I am using proxmox CE (6.3-3/eee5f901 (running kernel: 5.4.73-1-pve) I am trying to explore GPU passthrough with ProxMOX for this purpose ,I edited the /etc/default/grub with the lines My pveversion -v shows My "lscpu" shows root@server-4:~# lscpu Architecture...