error

Hallo liebe Proxmox Gemeinde, ich hoffe ihr könnt mir bei meinen aktuellem Problem helfen. Gegeben/IST: - VM(Debian Buster) mit der id 102 auf der VE mit der Version 7.2-4 - Proxmox Backup Server mit der Version 2.2-1 - Auf dem Host ist der PBS als Storage angelegt - Bei allen LXC Container...

We had problems adding disks as new Ceph OSDs pveceph createosd /dev/sdX Error was: command '/sbin/ip address show to '192.168.1.201/24 192.168.1.202/24' up' failed: exit code 1 The workaround was to teporarily deactivate the 2nd Cluster IP in /etc/pve/ceph.conf cluster_network =...

Hi all! I'm a total n00b about Proxmox, started using it last week. I've created first CT template, and from it I've created a full clone without a problem. And then in that newly created CT I've done some other installations and I wanted to create a new template from it too. That went OK. But...

Hello! I'm trying proxmox for my first time using VBox and I created a MV in a proxmox cluster but when I try to open it I get a critical error in the node I installed the VM I know it's some virtualBox error but maybe someone could help me. My PC specs in case it could be useful: 32GB RAM...

Hello, I recently bought a server (R820) and when it was time to install the proxmox operating system it gave me an error, in the end I realized that I had used the rufus program and tried BalenaEtcher and after using it I I let open the installer and install it. But now it won't let me start...

auto ens7f1 iface ens7f1 inet static address 192.168.0.100/8 gateway 192.168.0.1 bridge_ports enp9s0f0 bridge_stp off ethernet-wol g iface enp9s0f1 inet manual iface ens7f0 inet manual auto vmbr0 iface vmbr0 inet manual bridge-ports none...

Hi, While taking the backup in the proxmox, it shows the below error. ==== ERROR: Backup of VM 10655 failed - VM 10655 qmp command 'backup' failed - backup connect failed: command error: backup owner check failed (admin@pbs != root@pam) ==== Anyone please advise on this. Thank you.

This vm 109 has a 480GB disk and the lvs command returns saying that it is using 51.52% (247.3 GB). But when I access the vm and run a df -h it says it's only 87gb. Why is this happening? root@pve:~# ./discos df -h ######################## Filesystem Size Used Avail Use% Mounted...

Proxmox VE Version: 7.1-12 Server 1 Hardware: Intel i5 quad core 3rd gen, dual 120gb ssd in zfs raid1 boot and root disks 3, 2tb hdd in raidz1, 2 seagates and one HGST 4, 1tb hdd in raidz1, Inside a four disk ProBox usb3 enclosure Server 2 Hardware intel i5 dual core 3rd gen laptop cpu...

Hello, I'm completely new to PVE and have started using/learning it since 2 weeks ago. Yesterday I was able to configure an LXC appliance like I wanted and left it to download something over night. When I came home an hour ago, I noticed that my samba share (installed directly onto the PVE) has...

Unfortunately, this is yet another gpu passthrough post but i have tried to do my due diligence and go through multiple tutorials but every time i setup a GPU passthrough windows VM, the monitor is just a black screen with a blinking cursor. If i type i can log in onto root and use as proxmox...

One of the serves was showing "?" on all containers and the system itself. Tried rebooting but to no luck. I just set up the machine and it only has 2 vms - TrueNAS and Ubuntu Server. I cant log in directly to the machine but I can log in to the other servers and they display fine. pve...

Hi, With quarantine access via tickets, once a browser has been used for login via a ticket, it is not possible to login normal via username / password, even after clicking logout from the ticket based session. Br, Henrik

Hi, I have the same issue but doesn't work for me, Help Me please... ● pveproxy.service - PVE API Proxy Server Loaded: loaded (/lib/systemd/system/pveproxy.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Mon 2022-02-21 08:25:43 CST; 22min ago...

I'm new to ProxMox and I've been messing around with installing VM's and I've also been successful with getting GPU pass through on other VM's such as Ubuntu and Windows 10. I have successfully installed and have Big Sur running, but when I try to do a GPU pass through with a USB pass through...

I tried to set up PMMailGW on Proxmox VE 7.1-10 als LCX using proxmox-mailgateway-7.0-standard_7.0-1_amd64.tar.gz Machine starts, but console stays black, just cursor can be seen.. No info about IP, so no ssh possible....

Please help me understand how this can happen and why. How to return the Proxmox node to its original state?! The Proxmox node has a hostname for example "node7" and is in the cluster for 7 nodes. Has zfs-RAID10. 2 virtual machines (vm3 and vm4) installed with the help of terraform worked on...

I am trying to rollback a snapshot on a container and get the error: "lvremove 'xyz-vg/vm-123-disk-0' error: Logical volume xyz-vg/vm-123-disk-0 contains a filesystem in use." After that the Container is locked with snapshot lock. The lock can be removed by pct unlock 123. The lsof command...

Hi everyone just right now intalled the latest Updates 7.1-10 and rebooted my server. no GUI, i cant see my qm lists. #systemctl status pve-cluster pveprox pvedaemon pve-cluster.service - the proxmox ve cluster filesystem loaded : loaded (/lib/systemd/system/pve-cluster.service; enabled...

Hi I am running into a weird issue while trying to install PVE 7. I have a Dell R520 with and HBA (H330, IT Mode) and 2 Samsung SSD (consumer grade) connected to it. The system was set to BIOS boot mode and I was able to install Proxmox with ZFS RaidZ1 on those two SSDs, everything worked so...