error

Don't start web services and has many errors Can help me? root@pvlibra:~# systemctl status pve-cluster.service corosync.service ● pve-cluster.service - The Proxmox VE cluster filesystem Loaded: loaded (/lib/systemd/system/pve-cluster.service; enabled; vendor p> Active: failed...

Hi, Been using Proxmox on a test server and realize I want to commit a more substantial machine to using this awesome VE. Only to learn that differently named storage volumes cannot be migrated using the Web GUI. Okay then, no problem. So I try using the console and this happens: *So I...

Hi, today I reinstalled my server. I back-uped all my VMs. When I had proxmox freshly installed, I went straight to restoring my VMs. All went well except the most important VM for me. The size is 1.7TB. Server config: -old dell r710 -wd purple 4tb in raid 1 and other drives -128GB RAM -Xeon...

Hi all, today I found out that one of my HDDs in a zpool might be faulty. The scrub is running as we speak. The status shows 12 read and 9 checksum errors. I'd already replaced one of the drives a year ago because of this. Drives are Western Digital GOLD 8004FRYZ. SMART says passed and dmesg...

Hi all, I have a strange behavior on my Proxmox VE. The whole system freeze after some time of "idle", meaning I do not interact with it, but my VMs are still running. Sometimes after 1 hour sometimes after 24 hours. I am not really able to find the issue in the logs most probably because I...

Hello, I have a problem updating to the 6.2.x kernel. I just updated to proxmox 8 following the instructions below: /etc/apt/sources.list.d/pve-enterprise.list My problem is that I can boot the older kernel 5.15.x without any problems, but when I try to boot into the newer 6.2.x kernel I only...

So, I am having a little truble and unsure if it is something to do with SmoothWall Express or Proxmox. Each time I reboot SmoothWall Express, after the install or after, I am always seeing the screenshot attached. I have gone through and tried creating a new VM to see if that would reslove...

SeaBIOS (version rel-1.16.2-0-gealb?a0?3390-prebuilt.qemu.org) Machine UUID ____________ error: attempt to read or write outside of disk 'hd0' Entering rescue mode... grub rescue> VM=Ubuntu This is my first Proxmox VM. What went wrong? I am using ZFS on a fresh install. Thanks

FAIL: systemd unit 'pvescheduler.service' is in state 'inactive' As per some googling to help myself, see below. (Note: this is NOT part of a cluster) root@proxmox:~# !491 systemctl status pvescheduler.service ● pvescheduler.service - Proxmox VE scheduler Loaded: loaded...

NOTE: Quick fix use package "driverctl", not the same as early binding but pretty close. Thanks @leesteken Hello everyone I have been beefing up my storage, so the configuration works properly on PVE 7.x, but it doesn't work on PVE 8.0-2 (I'm using proxmox-ve_8.0-2.iso) My original HW config...

I'm running a dell r720xd with 12 4tb drives in the front and 2 256gb SSDs in the back. I installed Proxmox in ZFS raid 1 on the SSDs and when I boot I get the error "Error Preparing initrd: Bad Buffer Size." I updated all bios, firmware and put my raid card into I.T mode etc. I also can only...

Hello, I just installed Proxmox VE 8.0.3 on a HP Microserver Gen 8. I had to do some gyrations to prevent the boot volume consuming all available disk as a mirror. It was all pretty straight forward in the end. I have emails indicating the completion of resilvering from install drive to my...

Hi folks! I have a node and installed another just for replication. I've created a zfs where VM disks are installed. The second node have almost 100% free space, but when I start the replication process this happens: 2023-06-15 11:25:01 100-0: start replication job 2023-06-15 11:25:01 100-0...

I would like to clone a server this is the API-Endpoint https://X.X.X.X:8006/api2/extjs/nodes/proxmox/qemu/100/clone, And here is the request code: const options = { rejectUnauthorized: false, headers: { "Authorization": "PVEAPIToken=root@pam!admin=XxXxXxXxXxXxXxXxXxXxXxXxXx" }...

Hello everybody, I wanted to install a self-hosted instance of gitlab on my proxmox node and I wanted to avoid a VM because I wanted to avoid to run the gitlab database inside a virtual disk and I wanted to avoid a privileged container because the gitlab webserver could be faced to the public...

HELP Cant get this thing working. Trying to get my NIC into a PFsense-OPNsense VM. Once I get the VM started without, but once I add any of the X520-DA4 ports to the VM it no longer starts. I am getting a QEMU error code 1. Other VM's I plan on adding, once I get the router going. IOMMU is...

Hi, One of my proxmox nodes randomly stopped responding so i physically restarted the PC. Accessing the PC directly i was able to see an issue with importing the zfspool. It recommended to enter a certain recovery command - which i did (can't remember the exact command), and then it booted...

Hello, I have a problem with the Proxmox UI ... as you can see in the attached image both the VM/LXC names and statuses and the system resources graphs are not callable. I have unfortunately not found on the internet, but also did not know what to look for explicitly ... maybe someone here can...

Hello, I have a big problem with ProxMox. I am not able to restore my backups. I get the following error: restore vma archive: zcat /mnt/nvme1n1/dump/vzdump-qemu-263-2023_05_07-03_23_23.vma.gz | vma extract -v -r /var/tmp/vzdumptmp31931.fifo - /var/tmp/vzdumptmp31931 CFG: size: 758 name...

1.) I can't currently delete a VM which was created, setup, shut down and left off - it's not important at all. That file doesn't exist? I've rebooted so I'd expect any "locks" to files to be cleared? The VM was only used for a few hours shut down and left off. NOTE: this VM has never even...