windows

Hello everyone, I just installed my pve 6.3-2 like this https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Buster followed by this https://pve.proxmox.com/wiki/Windows_2019_guest_best_practices Since i only have 1 IP i choose the NAT setup explained here...

As we moved to PVE 6.2 (just several hosts, not huge install), we noticed that Windows server VMs we used to run on PVE are to see sudden NIC stop working. The fix is really simple: set NIC to not connected (no link) in PVE web interface, apply changes, the connect it again and apply again - all...

I order a new dedicated server with Proxmox and one VM. 10Gb Ram 6 Core @ 3.50GHz (1 Socket) When connect to RDP go right , but when try to COPY & PASTE from my computer to dedicated server start copy for few second and stop. The RDP go to black windows and I need to close RDP and...

Hallo zusammen, folgende Situation habe ich, die Server sind alle Windows 2012R2: Proxmox 1: Server1 Server2 ID: 301 Proxmox 2: Server3 Server4 Die Server sind auf dem local-lvm gespeichert. Jedes mal wenn ich von Proxmox2 einen Server auf Proxmox1 migrieren möchte, geht auf Proxmox1 jedes...

Hi, I could not find the windows template anywhere. Do you have windows template on proxmox? Any download link or seller?

Hi everyone, I'm following this guide to install QEMU Agent on windows 7. https://pve.proxmox.com/wiki/Windows_7_guest_best_practices#Install_additional_VirtIO_drivers_on_running_System https://pve.proxmox.com/wiki/Qemu-guest-agent When I go to install the drivers they are unsigned and return...

Hello, I have a dedicated server with ProxMoX with one Windows Server VM inside it with a public IP. Inside VM the port 1433 is open but it's filtered from node. Firewall in ProxMoX (Datacenter, node, VM0 is disabled. nmap 1.1.1.1 -p1433 Starting Nmap 6.40 ( http://nmap.org ) at 2020-08-12...

Good morning, everyone, I wanted to ask if anyone has experience with Windows Server installations via Cloud Init. Is it even possible? Thanks for your help!

Hello, Got a DELL PowerEdge R740XD server with Xeon Gold 6271C CPUs, which I try to setup Hyper-V on VM but failed. If I enable -hypervisor, Hyper-V install succeed and Windows reboot works, but we can't start VM in Hyper-V, event log says hypervisor not started. I have enabled nested...

I was wondering whether it is possible to access the data cloud in the home server via Windows Drive mapping. Can I easily control the storage of my Homecloud in the home server via the networks registered in Windows? What should I do for it?

Recently my colleagues asked me to set up several Windows Server (they need both 2008R2 and 2019) and FreeBSD (10 and 12.1) on our Proxmox hosts. The host server is brand new server free of anything so we go with 6.2 install, and it has h/w raid with LVM and ext4 on it (yes, old-schooler, I...

I have a need to configure a cluster for use with MSSQL however the validation is failing which I suspect is because it can't see the disk in the way it wants. Has any one encountered this before? Or know what the issue could be?

Hello, I'm trying to create a windows VM with cloud-init. I've downloaded the windows 2012 r2 image from cloudbase, but I have not been able to run int successfully. The problem is when I start the VM, it starts booting from disk, windows logo appears, but it suddenly restarts, and again same...

Hi, apologies if it is a stupid question, I am a newbie to both proxmox and KVM. Is it possible to use an existing physical block for creating a VM? A bit of context: I am in the process of consolidating all home PCs into one Threadripper system. on my old PC I have one windows and one...

Hi, My objective is to use one windows guest as a windows 10 kernel debugger (windbg is what i am using), and another one as debuggee (also Windows 10), I can't manage to make this work under (latest, just installed) proxmox. The standard setup is to have COM port of debugger redirected to a...

Hello, I'm struggling to get my first ever Proxmox system setup. I can get to the point where a windows 10 guest sees the 1070 ti, but I cannot get rid of the code 43 error. I've tried all sorts of troubleshooting including args, passing the rom through, uninstalling and reinstalling drivers...

I have a windows 2012 vm installed and I have an ip block how can I make it automatically assign ip addresses? I am planning on converting it to a template

Hello, I have an NVidia GTX 1660 GPU that I have to use with Windows Server 2019 only that following the official guide the VM starts, but it does not work nor noVNC from browser and not even remote desktop that I had activated, but proxmox from browser tells me that the VM is active, is there...

So I recently upgraded to Proxmox 6.1 on the same hardware (r710) I was running 5.4 on, but ever since the update my Windows VM's WILL NOT start no matter if they were existing (from backup) or if I create new ones. The syslog isn't very helpful either. The error I keep getting is: TASK ERROR...

Wer hat eine Idee, ich versuche seit Tagen Proxmox 6 zu installieren. Bis jetzt habe ich einige VMs zum laufen bekommen (Windows Server und Linux). Was ich aber nicht bekomme, sind die Netzwerkeinstellungen. Ich habe einen Root-Server bei Hetzner mit einer festen IP und einem Subnetz. Deshalb...