Hello I have SDMux. It is device which use chip USB2642 as a SDCard Reader. And the chip also support sending I2C data.
Via SCSI commands I can send I2C data from USB2642. It regularly work on solid windows or Linux machines.
But once I want to use it from Virtual Windows it does not work...
I have a USB receiver for a wireless remote, which has a power button on it. I use this in a VM with a media player.
Hitting the power button from within the VM will trigger a VM power-down. Once the VM is powered off, hitting the power button on the remote again will trigger a power-down of the...
I just finished migrating my Windows 11 gaming VM from Unraid to Proxmox. Along the way I encountered some obstacles. To hopefully save other people some time I'm writing a detailed guide here on how I set up my system.
Disclaimer: I am by no means an expert on this stuff. It is entirely...
I run a Debian-LXC as a Dockerhost.
The Dockerhost is dedicatet to my workshop running services for a 3D-printer and a CNC-router.
For the sake of keeping it simple, lets take one of them out of the equation and focus on the CNC-router.
The CNC-router need a USB-connection that I call ttyUSB0...
Hello,
Hope you can help, recently upgraded to v8 and now my users are unable to create VMs from a clone template.
The template has built in USB passthrough with named host ports, now whenever I try to make a VM from the template i am given the error message "Only root can set 'usb#' config...
Hi all,
I've seen a few other threads here asking about using USB Wi-Fi cards in an LXC container, but most were abandoned or restored to using a VM. I've gotten several other USB devices to work perfectly in a container, such as RTL SDRs, but I just can't seem to get my Wi-Fi card working. It...
I need to pass a USB HASP security key through to a Windows Server guest virtual machine in Proxmox and I'm not clear on how this can be done so that the USB is always mapped to this particular guest system. Could someone please share some explicit instructions in this regard?
Hi. After having issues with usb passthough to a VM a was searching forums for a solution and ended up with proxmox-usb-hotplug. I followed the installation and now I'm able to manually run it from proxmox shell with
proxmox-usb-hotplug --vmid $vmid -c /etc/usb-hotplug.conf -p $pwd
Next I...
Hi,
I need to passthrough a USB audio card to an Ubuntu 18.04 VM. I bought this interface: https://www.amazon.it/gp/product/B01N905VOY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1.
I tested it on a Windows machine and it works without problems. For some reasons, when the card is in use by...
Can something like this be achieved with Proxmox?
Basic Idea:
1) One Mirror Pool with 3 ZVols, each containing a Windows 11 VM
2) Pass through 3 Nvidia A4000 to these three VMs respectively as the GPU
3) Output the VM i.e., Windows on an external Monitor connected to these GPUs
Plan to run 3...
Hi,
I'm running GPU-less Proxmox and it's working great. I have one laptop with iGPU so I can capture & transcode videos locally with OBS.
This has been working good for years. But I sometimes feel it's not as flexible as Proxmox VM management, because GPU is bound to physical laptop.
Would...
Hi there,
I love proxmox but I have quite a specific usecase which is causing me some trouble. I am not an IT professional by any means so please bear with me.
My hardware:
1) 40 Intel NUCS (4 in cluster so far)
2) 48 port unmanaged switch
3) A lot of Huawei USB 4g/LTE dongles. (E3372h-607)...
Hi, I am running a Ubuntu 20.04 LXC on top of PVE 6.4
I am trying to access an HSM module USB from LXC.
contents of lsusb:
Bus 001 Device 016: ID 1050:0030 Yubico.com
Using the lsusb details, I have trying mounting the below directory where My USB is mounted in the PVE Node...
Hi,
I have attached a large HDD over USB3.0 to my Proxmox node. I use it to store backups of VMs and containers.
However, I also would like to run many media-heavy Docker containers in a VM (Plex, family photos, Nextcloud, etc) and would have to store the media on that said HDD. What is the...
Hey,
ich habe gerade einen neuen LXC erstellt und wundere mich, dass mit lsusb dort alle USB devices angezeigt werden die am Host angeschlossen sind, dürften die nicht nur angezeigt werden, wenn ich ein passthrough für den jeweiligen container eingerichtet habe?
Mein Problem: Ich möchte in...
Successful experiences passing USB Audio Devices to a Win10Pro VM, specifically to use a stereo line-in? (not the mono mic, nor the audio output).
Please share which USB devices worked for you without issues. I've been hitting a wall finding solutions for this.
Hi,
I'm really new to proxmox/linux and virtualization.
I've installed macos and have a wworking gpu passthhough but i have an issue with my Audio Interface ( Scarlett 2i2). When a sound start ( like a notification or a video/music, the sound is horrible, saturated and sizzling.. So i can't use...
Hallo zusammen,
je länger ich mich mit Proxmox beschäftige, desto begeisterter bin ich von den Möglichkeiten.
Gleich vorab, ich bin recht neu auch im Bereich Linux.
Eine Frage vorab (falls der lange Text abschreckt :-)):
Wie bekomme ich SANE dazu, den USB Scanner in /dev/usb/scanner zu finden...
Hello
i have running proxmox ve with following versions:
proxmox-ve: 5.3-1 (running kernel: 4.15.18-10-pve)
pve-manager: 5.3-8 (running version: 5.3-8/2929af8e)
pve-kernel-4.15: 5.3-1
pve-kernel-4.15.18-10-pve: 4.15.18-32
pve-kernel-4.15.17-1-pve: 4.15.17-9
i have configured an lxc container...
I would like to connect an Aladdin eToken to a VM (ID 490)
On the proxmox host I can see the eToken once connected. The lsusb and usb-device information.
#lsusb
Bus 004 Device 003: ID 0529:0600 Aladdin Knowledge Systems eToken Pro 64k (4.2)
#usb-devices
T: Bus=04 Lev=01 Prnt=01 Port=01...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.