sdn

Hi, it's a test-bed hence no criticality. I started experimenting with one server and I configured the SDN part. I then created the cluster and joined a second node. At the moment, if I connect to the GUI using the 1st node I see the SDN section of the Datacentre, if I connect using the GUI on...

hi all I want to create an SDN network via the API as I want to tie it to netbox using a webhook but I want to make sure I can manually create one using the API going to the docs I can't see a post option. is it possible to create a vnet ? if so does anybody have an example?

Good day to all, The following scenario: A server with a PFSense, not virtualized, not part of the cluster. A cluster with various nodes. Some of them have only one NIC, some have multiple NICs. The complete As a goal I would like all cluster nodes to have access to a specific lan of the...

Hello! I'm currently trying out a SDN of the VXLAN type within one of my 6 node clusters. The configuration file (/etc/network/interfaces.d/sdn) generates and gets applied perfectly on all nodes expect for one which leaves the following message: "local sdn network configuration is not yet...

Preface Hi together, this thread is highly connected to the issue I explained here: Connected issue I think it has the same root cause but since I got no answer there I tried to narrow down the problem, reframe it. So now I have a different symptom that is based on a more "common" scenario, that...

Hi everybody, I am struggeling with a problem where I did not figure out yet if it is a "basic" networking problem or something that has to do with my SDN configuration. The setup is the following: I have two VEs (192.168.2.10 and .11) coupled as a cluster. Within this cluster there is an...

Hello, We're currently trying out using the Proxmox SDN to manage not only guests (using the EVPN controller), but also host connectivity using BGP to experiment with interface redundancy using L3 protocols. It's a bit spotty of course since it obviously wasn't planned for that, but I wanted to...

I'm trying to setup an EVPN based SDN across 2 proxmox nodes. I have 2 nodes with EVPN setup (and they have peered and are exchanging prefixes). These nodes also peer over standard BGP using the BGP controller to my switch, which is receiving the subnets. My switch is configured for ECMP, and I...

Dear Proxmox-Team and other users, I am currently working on a proxmox-lab combining a root server and a lab server at home. I've establshed an VXNat-Zone at the cluster level and a Vnet based on this. After some testing I changed the network-setup of my Cloud-Init Guest and since this point...

Proxmox VE 7.2-7 PowerDNS Authoritative Server 4.5.4 create sdn dns object failed: dns api error: api response is not a json at /usr/share/perl5/PVE/Network/SDN.pm line 278. (500) Does anyone with the same error? Am I missing something? ID: pdns01 URL: http://10.10.0.90:8081 API KEY: ******...

Hi Proxmoxers out there ;) here is an abstraction of what I finally want to achieve in general: That means: There is a cluster of at least two PVEs behind a firewall managed by PVE An actor should be able to access the PVEs via SSH Within the cluster I want to have an internal network In...

Greetings, I have set up a test environment for BGP EVPN SDN as follows: * 3 hypervisor hosts running pve-manager/7.2-7/d0dd0e85. * Each hypervisor has a public IP and is set up as an exit node with SNAT. * Each hypervisor has a private IP that is used to create the BGP EVPN peering. The...

Hi, I'm working on setting up SDN in a new cluster. The first question is about the physical network topology. Option 1) --------- -- ISP -- --------- | V ----------------------- -- OpnSense Firewall -- ----------------------- | V ---------------------------- -- Proxmox...

Good day, I'm having an issue creating a VLAN based SDN. The Zone creates without a problem. It is associated with a bridge that has no IP address so that the zone is fully segregated. However, when I configure and submit Vnets within the zone all of the vnets show as being in error. The...

Hello Everyones, Scenario: cluster 4 nodes Issue: Some nodes get out of sync ( impossible push any configuration ) Log: pvestatd[1971268]: local sdn network configuration is too old, please reload I checked SDN configuration files and they missing configuration. How to restore good state ?

I'm experimenting with the SDN service and have not been able to figure this one out: If I create a Vnet (in my case 11) and tick "VLAN aware", then I cannot define a subnet. If, on the other hand, I untick "VLAN aware", I can define a subnet. What is the point of this and how does one...

Hello, I have been exploring SDN and wanted to try it on Proxmox. Right now, I have an experimental cluster with two nodes. The first thing I noticed is that there aren't the well-known SDN controllers like OpenDaylight, Ryu, and the others. And I'm not familiar with EVPN or BGP as...

Hi, I am testing VXLAN with BGP EVPN with Proxmox 7.1 SDN. BGP and EVPN seem to be working fine, and I can route traffic on VM interfaces that do not specify a VLAN tag. However, when I try to set a VLAN tag on a guest VM NIC which is using a VXLAN VNET, I get the following error: no physical...

I have deployed a VXLAN setup on my homelab cluster and I can get connectivity between containers on various hosts, as long as the MTU on the VXLAN zone is greater than or equal to 1280 (the minimum size of MTU in IPv6). My intended final state is one where the VXLAN networking is encapsulated...

Hello, After putting some thought into it I would like to move my proxmox GUI to another interface. Here is what I want to accomplish: Take the gui off of this address 192.168.10.3 auto vmbr0 iface vmbr0 inet static address...