sas hdd

Hello! Starting right away with my hardware: HPE DL380 Gen9 SmartArray P440AR Controller HBA Mode with Seagate Enterprise Performance 10K SAS Disks. In trying to install Proxmox on this Hardware and after booting the Proxmox Installation i can see that Proxmox detects the Disks and searches...

Hi there, I just bought a Fujitsu Primergy RX300 S7 and 6 new SAS HDDs. Installed Proxmox and plugged the HDDs into their bays. Everything works fine in proxmox except it cannot detect my SAS drives, only the two SSDs I installed on SATA ports for running OS. The SAS drives do pop up when...

All, I have a strange issue showing up after upgrading to Proxmox 7.3.4. I have a Dell poweredge R720 With a Perch H810 controller card flashed in IT mode. It is connected to an external 24 bay Dell powervault MD1220. For some reason when I plug in a single sas 2.5" hard drive under proxmox it...

Howdy! :) So I just finished installing the hypervisor, and now all of my SAS drives are flipping out when i try to make a ZFS storage pool form them. As a Single Drive I get... Error reading device /dev/sdc at 0 length 512. Error reading device /dev/sdc at 0 length 4096. # /sbin/zpool...

first post, i hope Ive included enough info system specs: HPE dl380p gen8 ibm m5110 (9207-8i) 120gb sata sdd 2x 4tb seagate sas hdd 3tb wd black sata hdd Goal: to pass the 2 sas hdd and 1 sata hdd through proxmox to a vm Results : sata hdd passes through, sas hdd not found Gui: sas device...

I had the last version of Proxmox installed on my cluster. Since I didnt have anything important, I just started over and installed 7.0 on every node in my cluster. I was having problems with joining them all together. Through my research it seems that I had too much information left over on my...

Hi, I am having a little problem when passing the physical disk to a VM with TrueNAS. Everything works fine, except for the speed of the disks. When TrueNAS is installed directly on the host, the disks are being recognized as: da0 at mps0 bus 0 scbus0 target 8 lun 0 da0: <NETAPP...

Hi, Im thinking to redo my setup regarding disk setup Supermicro SuperServer 4 servers in 2 unit chassie 96 Xeon threads >512Gib RAM and 6 disk slots per host with 10Gib network. Current setup is PVE5.2 with Ceph and for some stupid reason I was running the drives in raid 5, works quite well...

Dear gurus! I am running a ML380 G9 server with SATA drives and Proxmox VE 5.1 and love the performance and reliability. Recently we got a new HP DL380 G9 server with integrated HW RAID Smart Array P440 and 6 SAS 15k drives. I want to move my setup to this more equipped server, but I am...

Hallo, aufgrund der Größe macht für uns generell ein Ceph Cluster oder Ähnliches keinen Sinn. Wir arbeiten derzeit mit Supermicro MicroClouds die aber in Sachen Leistung und Flexibilität nicht mehr ausreichen. Ins Auge gefasst haben wir daher Multi CPU Systeme auf der Intel E5-2600v4 Basis...