qnap

Hi, I'm tring to setup a backup storage of my VMs on my QNAP Nas, but I'm getting some errors. Here's what I did to setup everything: 1) Created a folder on my QNAP Nas 2) Setting up a NFS storage on my proxmox server (added with no problems) 3) Created a backup-job 4) While the job is...

Hi, i have a proxmox cluster of 2 nodes, connected via a 10Gb network to a QNAP Nas. Currently, all my vm disk are stored on that NAS using iSCSI. I would like to move from iSCSI to NFS. So, i created the NFS datastore on proxmox and all just works. But, regarding the migration, i currently...

I am wondering how best to use the drives on a fully populated QNAP TS-1655 device (12x 3.5" bays, 4x 2.5" bays and 2x NVMe slots) with 128Gb RAM and a 10GbE adapter installed. The intention is to install Proxmox as the host OS to manage all VMs including TrueNAS Core to provide network storage...

Hi everyone! I would like to ask you for help: I have a Proxmox 8 installation with next networks: vmbr0 (10Gbps network) Management network/proxmox web-interface (192.168.10.0/24) vmbr40 (40Gbps network) trunk connection with vlan awareness enabled vlan9 (part of vmbr40 iface) (192.168.25.0/24)...

I have a VM on my QNAP under Virtualization Station. I have shut it down, exported it as a .OVF, imported it using: qm "importovf 300 ./turnkey-core-16.1-buster-amd64.ovf HDD_500GB --format qcow2" It imports just fine, takes a while, and it is going on a CEPH filesystem, however, after it is...

Hello, so I'm using my QNAP as a iSCSI target, on the LUN itself is dedublication and compression on so I can save space and use the LUNs more effencient. But the QNAP shows a usage of roughly about 300G and Proxmox sees almost 800G. How do I make it possible so the Proxmox Cluster / Host can...

Hi, following setup: My QNAP NAS is connected to a UPS via USB, and it will shut down after 10 minutes when a power loss is detected. Now I can activate the UPS Master in the QNAP settings. This master should inform following IP addresses about the power loss: 192.168.1.1 (router) 192.168.1.30...

Hi all I am trying to add QuTS Hero zfs over iscsi to proxmox v7, assuming from other posts that is free bsd i tried and failed. Anyone able to set this up? Latest version of pve and quts hero.

Hello guys, is there a way to change the user from root to admin when connect ZFS over ISCSI? command '/usr/bin/ssh -o 'BatchMode=yes' -i /etc/pve/priv/zfs/10.10.1.100_id_rsa root@10.10.1.100 zfs list -o name,volsize,origin,type,refquota -t volume,filesystem -Hrp' failed: exit code 255 (500)...

I am trying to set up the following environment: So in the virtual machine the connection to my workstation should work without configuring anything more than the ip address - so the so called "VLAN aware Linux bridge" on the documentation. My /etc/network/interfaces is almost exactly same...

Hello! We have a QNAP with a LUN and we would like to connect to this device using iscsi so we can send all the backups to that storage. root@pbs:~# iscsiadm -m discovery -t st -p 192.168.65.3 -o update 192.168.65.3:3260,1 iqn.2004-04.com.qnap:es1686dc:iscsi.backup.4e4451.1 root@pbs:~#...

Hello Everyone, I need your help I'm a Proxmox user and enthousiast. I've recently changed one of the 2 Physical server (node) of my office and I've spent hours trying to understand why my vms couldn't get connected to the network despite I've done exactly like all the other time I've installed...

First, I am new to Linux/Proxmox but have been running/testing proxmox for 12+ month without any issues until I recently purchased/upgraded to a newly released network adapter. I purchased the 5gbe qnap-uc5g1t and tested with Proxmox releases 5.4 thru 6.1. Device will run but randomly/suddenly...

First, I am new to Linux/Proxmox but have been running/testing proxmox for 12+ month without any issues until I recently purchased/upgraded to a newly released network adapter. I purchased the 5gbe qnap-uc5g1t and tested with Proxmox releases 5.4 thru 6.1. Device will run but randomly/suddenly...

Hallo, ich habe beim Backup zur QNAP NAS per NFS folgende Fehlermeldung. Ich denke dass ich alle NFS-Freigaben etc. auf der QNAP erfüllt habe? () INFO: starting new backup job: vzdump 102 --node NUK --remove 0 --mode snapshot --storage qnapbackup --compress lzo ERROR: Backup of VM 102 failed -...

Greetings Forum: I'm new to PROXMOX. I have been experimenting with PROXMOX on a Dell R720xd, a H710 HBA flashed to IT mode, an internal PMR79 Dual SD Card module to store the OS, numerous 3TiB SAS drives, and 128GiB of ECC RAM. I run one QNAP NAS box for file storage, a media server (Plex...

Hello I have 50 vps installed in 40 micro servers (microblade with atom C2750 and 8G of RAM), the microblade is connected to an QNAP ES1640DC-V2 (dual controller with 4 SSD cache and 12 SAS Near-line 6T) for storage VMs. All servers have 2,5Gbs/ network interfaces and are connected to NAS with...