proxmox 5.1

Hallo zusammen, ich konnte mein Problem nun mit Proxmox 5.1-46 und Proxmox 5.1-41 nachstellen. Auf beiden Systemen kann ich über den NGINX the Console(JS) benutzen, jedoch nicht die normale Console (noVNC), da bleibt das Bild schwarz. Auch in mehreren Browsern sowie nach Cache Löschung Die...

Hi, I have the problem that i can't use noVNC with Proxmox 5.1 and nginx. i always have blank screen but i used this config https://pve.proxmox.com/wiki/Web_Interface_Via_Nginx_Proxy but still the same error, if used the adress over port 8006 direct, i have no problems. is there any fix for...

How to copy a vm in proxmox to HDD External, Thanks in advance.

Hello, I have installed Proxmox 5.1 (latest release) on my Supermicro server with an X10 board last week. Every 1-2 hours the server freezes and becomes unresponsive. Even typing in the IPMI KVM console doesn't work. Only when I do a hard hardware reset, the server reboots and boots proxmox...

Hello, I just upgraded (by installing from scratch) proxmox 3.2 to 5.1 on a PowerEdge R630 server. With this new version it tries to access /dev/sr0 during boot and it fails because that's a CD which is absent from the drive. That somehow seems to be a requirement for dev-pve-swap, which...

Hello, I have Dedicated Server on Hetzner with a single NIC and a single public IP on it. There are quite a few discussions about setting up Proxmox networking in such a situation. Specifically, I have followed the following guides: forum <dot> proxmox <dot>...

Hi, suddenly one node in my Proxmox 5.1 cluster becomes unavailable into the web interface and it's icon becomes grey with a question mark, like in the following screenshots: This happened three times on three different nodes (on node01 and node02, I rebooted them to solve the problem). All...

I'm trying to use Nethserver 7.4 in several containers for services like proxy, chat, VoIP, Mail, etc. Installing Nethserver in a KVM is pretty straightforward, but doing the same in a CT has some caveats. This is how I did it: Create CT ssh-public-keys must be a file with a ssh-rsa ...

Hello, After I used out all my options, I feel like you guys are the only ones that can advise me or point me to the problem. Basically I have a node running Proxmox 5.1-36 and a running VM with Windows Server 2012 R2 link cloned from a template that I freshly prepared. Node specs: Intel...

Hello, we have a cluster of proxmox 5 with four nodes in unicast (IPv4) and the syslog of the four nodes is appreciating the following message: ... corosync[1491]: alert [TOTEM ] Invalid packet data ... corosync[1491]: [TOTEM ] Digest does not match ... corosync[1491]: [TOTEM ] Received message...

Hallo alle zusammen, ich setze Proxmox in Version 5.1-42 VE (Kernel 4.13.13-4-pve) ein. Gestern wollte ich mit apt-get update && apt-get upgrade && apt-get dist-upgrade && apt-get clean Proxmox aktualisieren. Die nachfolgende Ausgabe würde aber die Pakete proxmox-ve und pve-firmware sowie...

When I upgraded from 4.4 to 5.1, I ran into a problem where the lvm-thin storage refused to start when the system was booting. I've forgotten the exact error code, but it was something along the lines of lvm2-activation.service error code 5. This of course caused quite a panic, even though I...

Hi everyone, After a seemingly successful Proxmox 5.1 install on my Dell PowerEdge SC 1435 2x Quad Core AMD Opteron cpus, 16 gb of ram, 2 GB NICs. I'm having trouble to connect to the configuration panel at https://10.0.1.80:8006. While doing the Proxmox installation off of a USB I noticed the...

Hi, I cannot say for sure whether this is a feature or a bug? Installed Proxmox 5.1 on a KVM machine with 100GB space allocated, but 'df -h' failed to show up pve-data mounted. The only error message I see: <QUOTE> # dmesg | grep vd [ 0.921700] vda: vda1 vda2 vda3 # dmesg | grep sd [...

Create snapshot on PVE 4 to QEMU instance and copy by scp to PVE 5 (with zfs storage with raid 1) and can't restore snapshot. pveversion -v proxmox-ve: 5.1-25 (running kernel: 4.13.4-1-pve) pve-manager: 5.1-35 (running version: 5.1-35/722cc488) pve-kernel-4.13.4-1-pve: 4.13.4-25...

Hi folks, Just after a sanity check here. I recently upgraded my Proxmox 5.x server to 5.1 and noticed the following errors on boot. [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to uersion: 0x3a (or later) Reading all physical volumes. This may...

Hi. I have a PVE cluster made with Proxmox VE 5.1 nodes. Sometimes when start tasks on VMs (start, stop, etc) I get this error on the nodes console: unregistered_netdevice: waiting for lo to become free. Usage count = 1 When I get this error the task seems to be hanged and does not complete...

Hallo zusammen Ich habe in den letzten Tagen einen komplett neuen Proxmox Cluster mit Ceph erstellt. Wir hatten eine Reihe VMs die auf einem PVE 4.4 Cluster liefen, also fehlte noch ein Node. Nachdem ich dann alle Nodes bis auf den einen der die VMs am laufen hielt Online hatte, Ceph...

Hi there, I'm using Proxmox 5.1 with 1 To lvm-thin storage for VM. I see that the host and active VM are slow down when I restore a VM from a external NFS server. is there any solution for slowdown restore I/O or where is some bug or configuration error on my installation ? thks for help. PLou

Others wiser than me may have already solved this problem, but I'm stumped and need help. I'm on a steep learning curve with linux and Proxmox, so please bear with me. I followed the below links trying to set up a Windows 10 VM with Kaby Lake IGD passthrough to drive one or more of my...