pcie

# Main problem There is a 2 seconds gap of silence after every 10 seconds of normal playback # Setup 1. Proxmox 7.4-3 2. Passing through GPU + a PCIe Sound Blaster to Windows 10 VM 3. Running VAC https://vac.muzychenko.net/en/, same thing happens with https://vb-audio.com/Cable/index.htm...

Hi, We have got 4 pcs of Micron 7300 Pro U.2 (installed on PCIe using PCIe Adapter) 4 TB each which we installed on Dell 730 having Proxmox 7.1-7 Disk were properly detected. Using linux command line we successfully prepared disk with gpt and created partition and mounted to the linux...

I am trying to add a new additional M.2 SSD to an open slot on my home lab server running Proxmox. The addition of the new drive takes over the PCIe passthrough and does not allow the NIC assignment, so I lose network GUI. Can anyone walk me through the steps needed to attach this new drive?

Hello proxmox users! quick question about using nvme m.2 drives. I have a pcie to m.2 cardholder in my server with a total of 4 drives. I need a vm with a lot of speed. In terms of performance, is it better to pass through the whole card or is there no loss when creating virtual disks?

Hi all, I use Proxmox for Home Assistant and I have HP ProDesk 400 G6 mini PC and I want to use motherboard bluetooth in HomeAssistant but I don't know how to add bluetooth to virtualization of homeassistant. Do I need to install drivers for bluetooth some how in proxmox? Or I have to add...

Hi, I have problem pwith passthrough SATA controler to one vm and pcie USB3 to another vm. I using Supermicro H11DSi motherboard with AMD Epyc 7601 CPU and latest version of Proxmox. I have enabled IOMMU in BIOS and Im add "quiet amd_iommu=on" to systemd-boot file and reboot host. Before Edit...

Hi, I have PCIe network interface card: NC375T PCI Express Quad Port Gigabit Server Adapter. It uses netxen_nic module. The problem is that it's detected every second boot. I noticed that the module and firmware are loaded correctly when it boots using certain SMP MP-table. When I see in...

Hey, I am currently running a Ryzen 9 5900x with a Asus X570 Steel Legend, which afaik does not support IOMMU Is it possible to pass through a gpu to a windows 10 VM using a PCIE x16 to usb adapter despite not having IOMMU? Thanks in Advance

Hey Everyone, PCIe accelerator cards of all shapes and sizes interest me, mostly because CPUs are these hulking beasts that handle significant amounts of processing and they are constantly taxed from "side" or "auxiliary" workloads outside of their primary tasks. Take a hypervisor, proxmox...

I installed a Synology system on the pve, then I bought a minipcie to sata product, after booting the pve did not recognize the hdd，The motherboard's own sata interface is normally recognized to hddI attach a link to the product to see if you have encountered it.PCI-E PCI Express to SATA 3.0

Hallo zusammen, ich habe eben einen neuen ProxMox VE Server (7.1-8) aufgesetzt. Im Grunde ist alles schick. Der Haken: ich möchte zwei zusätzliche Netzwerkkarten in den Rechner einbauen. Doch dabei werden PCIe Bus Errors erzeugt. Auf dem Bildschirm erscheint eine endlose Kette von...

Good morning, I have problems with Windows VMs, I install and everything works, but when I try to integrate an NVidia GPU it crashes every now and then and if I insert a PCie USB Card the VM freezes and Windows does not start, has anyone already had these problems? If you tell me all the tests...

大家好，首先，英語不是我的母語，但我會盡力描述我將要做的事情，所以如果有任何不清楚的地方，請告訴我，我會盡力解釋。 我有一台安裝了 PVE 的服務器，它可以識別 ConnectX-3 並且工作正常，但是當我嘗試將它傳遞到我的 TrueNAS VM 時，出現以下錯誤 kvm: -device vfio-pci,host=0000:01:00.0,id=hostpci0,bus=pci.0,addr=0x10: vfio 0000:01:00.0: 未能為中斷 INTX-0 設置 TRIGGER eventfd 信號： VFIO_DEVICE_SET_IRQS 失敗：設備或資源繁忙...

Hello, I have just received a Hauppage WinTV quad tuner to use with plex and when I try to connect it to my server, physically, I lose networking. I cannot even ping my router, it just returns destination host unreachable. Motherboard: ASUS H110M-R I guess that it is somehow recognising the...

I successfully managed to setup PCIe Bifurcation on my Supermicro X9DRi-LN4F+, since I am using a NVME Expander (ASUS Hyper M.2 X16 V2) for 2 x NVME drives in striped configuration (planning to destroy & recreate as mirror for safety reasons !). The NVME Expander is *not* passed through any...

Hi everyone, On my home server I'm trying to pass through a SATA HDD to a VM (Debian/Openmediavault) via a cheap 2-port PCIe SATA controller (ASM1062). I followed the PCI passthrough instructions on the wiki (https://pve.proxmox.com/wiki/Pci_passthrough). Now every time I start up the VM with...

Hello, I have a VM that I'm passing a GPU through to. The passthrough itself works great. The issue is that whenever this VM is powered on, the host will reboot without any interaction from me. The reboot happens anywhere from 3 - 15 minutes after the VM has been powered on. I have many other...

Hello, everyone! My PCIe SSD runs very slowly within the guest Windows VM. Basically it performs like a very very slow SSD. I can't seem to find the cause. Maybe you can help me out? Background I was exploring the options how to make Windows VMs run extremely fast atop of Proxmox. One of the...

Hi all, So I've created an Ubuntu LXC Container and I've been trying to get it to access the WinTV-QuadHD PCIe TV Card that I use for Plex. My Config file currently looks like this arch: amd64 cores: 12 hostname: plex memory: 2861 nameserver: 192.168.0.6 net0...

Hi! I am currently using a Custom Little Server with H97N-WIFI Motherboard and an i5-4460. I got an Intel Wifi 7260 Mini Pcie and an Atheros AR9462 Mini Pcie. The Problem is that I can't pass the Atheros Card through my KVM Machine with pfsense installed because it freezes the host after...