pci

Hi, I'm struggling with an issue on Proxmox. I want to create a VM on my server, with 3 GPU NVidia GA102. 2 GPUs are working well when I add them but the third one doesn't working with the 2 other one, the VM start but I have a black screen. Noticed that the GPU which is not working well, work...

I am trying to set up pfSense in a VM based on Techno Tim's tutorial video (except for UEFI). I also recently acquired a Dell 5719 quad port PCI-e which I want to use for both WAN and LAN connectivity. However, when attempting to start the VM, my network connection dies and I am unable to use...

After spending the last 2 weeks gouging my eyes out trying to make this work, I am finally asking for help. I have a ASRock B560M Pro 4 with a Core i9 10900(non k). The IGP on comet lake barely works on linux requiring the use of this https://patchwork.freedesktop.org/patch/412664/ kernel...

First of all I would like to thank the Proxmox team for the great software and the nice community they built. I'm using a custom hook script (hookscript.pl) to manage VMs on a system with various GPUs passed through. The first motivation to do so is to avoid a VM (which requires a GPU) being...

While struggeling with PCI passthrouhg (it does work, eventually) i found something peculiar. Sometimes the VM would not boot because the PCI.id for a device was alread in use. This was because the pci-id for the vga and the audio were written as the same. So instead of 0000:17:0.0 and...

Hi, I'm trying to get PCI-Passthrough, following the guide here: proxmox.com Running Proxmox 6.1-7. Kernal version 5.3.18-2. Running a Ryzen 2600, on an ASRock B450M Pro4. Using a GTX 1070 and GT 710 as GPUs. I have set the required parameter in /etc/default/grub, and added the modules in...

Hallo liebe Community, ich versuche seit Tagen vergebens meine GPU in eine Windows VM einzubinden. Angezeigt wird sie mir im Geräte-Manager auch. Irgendwelche Treiber hat die VM auch schon installiert aber leider kann ich die GPU immernoch nicht benutzten. Der Fehlercode 43 wird mir angezeigt...

Hello, I have a VM that I'm passing a GPU through to. The passthrough itself works great. The issue is that whenever this VM is powered on, the host will reboot without any interaction from me. The reboot happens anywhere from 3 - 15 minutes after the VM has been powered on. I have many other...

Hello, I have a very intermidant problem when starting my Windows 10 guest with a GPU passed in. Sometimes it will start first time through the WebGUI, others it will give the following error: TASK ERROR: start failed: command '/usr/bin/kvm -id 109 -name HTPC -chardev...

Ich habe ein Acronis Image einer physikalischen Windows XP Maschine auf eine VM zurück gespielt. Das System fährt hoch und lässt sich gut bedienen. Allerdings wird nach jedem Boot das Ethernet-Device wieder neu erkannt?! Wenn ich die Intel E1000 oder VirtIO nehme wird ein "Ethernet Controller"...

Ok so i follow all the steps and heard the video card kick in for the first time of weeks of reading and many failed trys I used "hostpci0: 01:00.0,pcie=1" but had to remove it at it seems to also move over the pci nic card to that VM as well. is there a way to just have the pic that i want to...

Hi guys, I have minimal info right now and i know i should be better off writing this at home with full access to completely test as I've done before hand with the same end result. Here it goes, Not trying to reinvent the wheel here, most of this i am all very new to but i don't know how...

I've been experimenting with PCI/PCIe passthrough this week, and actually managed to get it working. However, the fly in the ointment has been audio. USB audio was horribly garbled. Passing through the host's onboard audio works a lot better, but I still get crackling and skips in the audio when...

I got a working PCI Passthrough of a P410 Raid Controller with Proxmox 4.4 on a HP Microserver Gen8. But after reboot or stop/start the VM the passthrough ist not working anymore. Only a host reboot fixes the problem. After rebooting the host and starting the VM the first time everything is...

Ich suche mich nun schon seit Tagen wirklich dumm und dämlich... leide bin ich bis jetzt noch auf nichts Brauchbares gestoßen. Ich habe mich daran versucht einen RaidController an eine VM durchzureichen... Ich bekomme aber ständig folgende Ausgabe: kvm: -device...

Hello I'm running proxmox 3.4-6/102d4547 for about a year and so far I'm pretty satisfied. A few days ago I created a new virtual machine, to be used as an Ubuntu 16.04 x64 LTSP server. The hardest part about this is the pci passthrough. Since the ltsp server usually uses 2 NIC's, one for the...

Hi, I got Proxmox installed and set up just the way I envisioned it and I have been loving it. There is one thing that's left and I can't seem to get it sorted out. Current set up is as follow: - Proxmox installed with 4 NICs and an LSI HBA card. - eth0 is bridged for the host itself. - eth1...

The subject says it all. We can speculate as to the cause: We think it is necessary to enable "above 4G decoding" in the OVMF bios. If that is the case then the question is: How can we enabled "above 4G decoding" or similar feature in the OVMF bios? Otherwise, we believe the reason the VM...

greetings to all, I am currently evaluating proxmox and I'm able to create "regular" VM's without problems. Going past creating regular VM's, I'm trying to passthrough some intel ethernet card(s) and I will have problems if: -- two physical intel ethernet cards are passthrough to a single...