lxc container

Hello, I have a "Docker LXC" container running on my Proxmox host. I just don't know how, or if it is necessary to update/upgrade it. if so, can anyone tell me how best to update/upgrade it? thanks for the help!

How can one import a LXC container template from linuxcontainers.org? According to https://images.linuxcontainers.org/ there are many more LXC container templates then those available as predefined templates by PROXMOX. Understandably, since those in the template list are officially supported...

Hi, On my server I have 2 disk. One where I have proxmox system(and some free space) and second with LXC container. While I was adding another partition to my system disk LXC crushed. After some digging I came to conclusion(don't know if good one) that my system rebooted and mounted partition...

Hello everyone, I'm just testing something and everything works so far for exception of the Linux Bridge with the CT. To explain the base : I'm running Debian from a Virtual Box. The virtual box have a Bridge connection to Debian on Settings. Then I proceed to install debian 11 bullseye and...

Greetings, I'd appreciate feedback on if my objective is possible or not, and if I'm doing something wrong. NB: I have done a bunch of reading/research to self-help and find a solution but so far: nope, not working - I tried a bunch of things without success. Per topic/subject - My objective...

I have a few shares setup now and I thought everything was working well until I tried to write to a share. I'm getting a permission denied. I've tried creating the vault folder in the LXC before adding in the mount point to the container too. pvesm add cifs vault --server 192.168.55.21 --share...

Hello. Yesterday we migrated our Proxmox VPN server from QEMU virtualization to an LXC container, and when we connected to the VPN and measured the speed on speedtest.net, the download speed was 0.98 Mbps, less than 1 Mbps. Upload speeds were about 30 Mbps, which was typical. When running with...

Hallo, ich habe eine Frage zur Erreichbarkeit eines LXC-Container mit dem Unifi Controller in Verbindung mit Proxmox und VLans. Bisher hatte ich den Unifi Controller auf meinem alten Proxmox-Server in einem LXC Container laufen und keine VLans eingerichtet. Der Proxmox Server hing am Switch mit...

Hi everyone! Although this is my first time posting on this forum, I have been using proxmox for a while and love it! I have previously always only logged in as root on my host and never had much issues. Now however I want to set up an lxc under a separate user which was much trickier than I...

Hi all, I've spinned a VM to run TrueNas on proxmox 7.4-16 and it expose an NFS share that has been mounted in the Proxmox host: /etc/pve/storage.cfg nfs: nfsdata export /mnt/hddstorage/nfsdata path /mnt/pve/nfsdata server <TrueNAS_VM_IP> content images...

I am trying to install Linux x64 (AMD64/EM64T) Display Driver Version: 390.157 (the last supported by my video card) on my freshly installed pve-manager/8.0.3/bbf3993334bfa916 (running kernel: 6.2.16-3-pve) in order to do GPU passthrough to my LXC container. Installed all kernel headers...

Hello! I have recently set up a PVE 8.0 workstation, with the following network configuration: [WAN] | [router] | (enp3s0) | [[PVE host]] / \ (vmbr0) (vmbr1) | / \ [OPNsense VM] [all VMs and CTs] where vmbr0 is a...

Hallo Zusammen, leider ist es mir jetzt innerhalb 2 Wochen schon 3x passiert, dass mein DNS nicht mehr funktioniert. Nach kurzer Suche habe ich gemerkt, dass der Adguard im LCX Container auf 100% Auslastung war. Ich habe den Container neu gestartet und dann ging es wieder. Aber das ist ja keine...

I am a total beginner, so would appreciate any help. I have a setup with a VM and a LXC container, and I am unable to start the container. The debug output says "No Space Left on Device": Here is the output of df: And du: Both of these look okay to me. How should I proceed, to figure...

I read some threads before here with similar questions but I think I couldn't find what I'm looking. First and foremost I'm someone that is new to Proxmox and Linux. I just got a NUC to create a new home media server. I feel that there are different ways to design the server. In a high level...

I saw another post like this one and have looked over it, but it is no help either. Fresh install of proxmox 7.4 about a week ago Linux krusty 5.15.107-2-pve #1 SMP PVE 5.15.107-2 (2023-05-10T09:10Z) x86_64 GNU/Linux Not much done on it yet, restored some backup vm's and lxc's from old node...

I'm new to Proxmox, coming from a few years using TrueNAS Core/Scale. I'm running a single instance of Proxmox VE 7.4-3 (Linux proxmox 5.15.107-2-pve #1 SMP PVE 5.15.107-2 (2023-05-10T09:10Z) x86_64 GNU/Linux). It's on old desktop hardware: Gigabyte F1 mobo, Intel i7-6700k CPU @ 4.00GHz, 32GB...

Hallo zusammen, gibt es eine Möglichkeit/Doku, wie ich ein installiertes Programm innerhalb eines LXC Containers automatisch starten kann, wenn der Container neu startet? Beispiel: habe eine Grafana Instanz in einem Container installiert; mit dem Befehl "sudo systemctl enable...

hi, i have LXC container and will like to mount file my /etc/pve/lxc/102.conf: arch: amd64 cores: 3 features: nesting=1 hostname: d memory: 5120 net0: name=eth0,bridge=vmbr0,firewall=1,hwaddr=FA:59:8D:CB:AD:47,type=veth ostype: ubuntu rootfs: local:102/vm-102-disk-0.raw,size=20G swap: 512...

I've been hitting my head to the brick wall that is iptables inside a Debian 11.3 container in Proxmox. I cannot seem to get it to block anything and there seems to be some contradicting discussions about if iptables should even work inside LXC. I do use Proxmox firewall as well, and it is...