lvm data /dev/pve/data

Hi, I bought a license key and applied the key. Then did a update from web ui. Upon reboot (which was suggested by update), I can not start the VMs since the disk are missing. Apparently my /dev/pve/data has become read only. And storage pool size has reduced to 100GB from ~1TB. I added...

I recently had an SSD fail on writes, and luckily, I could clone it using dd without much issue. Had to run fsck /dev/mapper/pve-root, and all was good. However, the new drive is 500GB; the previous was 120GB. I'm trying to claim that space and not quite following the instructions in another...

Hi everyone, sorry if I open a new thread but I can't find any info. for my company we are trying proxmox but we have no experience. the system is on PowerEdge R750xs with 2 SSDs 500GB RAID1(DB) on PERC H755 flanked by a PowerVoult ME5012 with 2 SAS 8TB RAID1(OS) and 4 SAS 12TB RAID1(DATA)...

Proxmox shutdown due to a sudden power cut. Now, I am not able to start the VMs. Below is the error message i am getting: activating LV 'pve/data' failed: Check of pool pve/data failed (status:1). Manual repair required! Also, ran the below test: smartctl -a /dev/nvme0n1p3 smartctl 7.2...

What happened before the error: It all started when I was trying to copy a lxc-container. The statuspage just said "Creating virtual disc" (Or something like that, I can't fully remember) After multiple tries and trying to create a new container, I thought "maybe I should update my environment"...

Hey everyone, im at a loss here, on my own. I just restarted my main Proxmox node and since after some time no container was reachable I looked in Webinterface. No Container and VM was running. Trying to start them results in: "TASK ERROR: no such logical volume pve/data". I think I found the...

hi all, trying to recover from a catastrophic power failure and running into dead ends... hoping someone can help. My PVE node was booting to a grub - unknown filesystem error. I was able to run fsck on /pve/root and bring it back to bootable but running into this problem: # lvconvert --repair...

Howdy! I have a head-scratcher. I installed 7.2-4 on new hardware and added it to my cluster. The install created three LVMs: LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert data pve twi-aotz-- <794.79g 0.00 0.24...

I am new to Proxmox. After my 250 HD got full I added 1TB HD and extended existing LVM but after delete partition fdisk /dev/sdb (d , 1), It still shows on Disks ->LVM -> pve -> [unknown] (image-1). Also shows up on a terminal #pvs (image-2). I need to remove it. Please help Thanks, Junoonguy

Hello, My problem here is, I upgraded Proxmox, somehow it jumped from 7.0.-2 to 7.0.-11. removing all my virtual machines. but luckily I see that the machine disks still exist. so I created same machines with same name and ID, now to locate the machine disk and attach it to the machine is the...

What is the purpose of the local-lvm on a new installation of Proxmox VE? Can the space be reclaimed and repurposed into a directory so that it will also be able to store snapshots, backups, and others...

Hi, I have two 8TB disks(sda, sdb), make up a RAID1 using lvconvert -m1 pve/data_tdata and pve/data_tmeta. Yesterday I powered off my server and did some other things, when I powered on again, kernel printed some logs: [Tue Sep 14 15:02:21 2021] device-mapper: raid: Loading target version 1.14.0...

Hallöchen, ich habe zu Hause einen 4 Node Proxmox-Cluster und habe für die stärkste Node eine größere SSD gekauft. Aufgrund der Platzeinschränkungen ist es nur möglich die neue gegen die alte SSD auszutauschen. Ich habe mithilfe von Clonezilla und gparted die alte SSD zu der neuen gespiegelt...

$ pveversion -v proxmox-ve: 5.4-2 (running kernel: 4.15.18-17-pve) pve-manager: 5.4-10 (running version: 5.4-10/9603c337) pve-kernel-4.15: 5.4-5 pve-kernel-4.15.18-17-pve: 4.15.18-43 pve-kernel-4.15.18-12-pve: 4.15.18-36 corosync: 2.4.4-pve1 criu: 2.11.1-1~bpo90 glusterfs-client: 3.8.8-1...

Hi, I'm in contact with proxmos for a week now after several friends only said good things and the first experiences are really great. I want to move my "home environment" to VMs. Currently I have 4 Intel NUcs for several proposes and alsready started with a Proxmox cluster with 2 of them to...

Hi, short question, how can i create a directory in the data lv? root@pve:/var/lib# lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert data pve twi-aotz-- 2.61t 3.15 1.92 root pve -wi-ao---- 111.83g swap...

Greeting to all Proxmox´s community. I have a tricky problem here with one of our proxmox servers. We had installed in this server the version 3.1, but it seems that for a problem with the disc, the Operating system failed and we had to reinstalled the server, now with the version 5.1. The...

I Restarted the Proxmox server After that the VM s are not stating so when i start searching i saw this thread https://www.linuxquestions.org/questions/linux-server-73/lvm-lv-status-not-available-after-reboot-771192/ So i run the lvconvert --repair pve/data lvchange -a y pve/data i have...

Hi Guys, I have HP DL 360 - 1U Server which I installed Proxmox ver 4.4 on 2TB RAID HDD. (1TBx4) I need to create a Storage Space for Data. I don't know how. below is some Info. Please assist kindly. Device Start End Sectors Size Type /dev/sda1 2048 4095 2048...

I have a Dell R710 with the following drive configuration. CacheCade and RAID arrays are setup on a H700. 2x 120Gb Kingston SSD (CacheCade) 2x 146Gb Seagate SAS (RAID 1) 4x 600Gb Western Digital SAS (RAID 10) I would like to have Proxmox on the RAID 1 array and use the RAID 10 array for VM...