Proxmox shutdown due to a sudden power cut. Now, I am not able to start the VMs. Below is the error message i am getting:
Also, ran the below test:
Can anyone suggest me how to configure it?
activating LV 'pve/data' failed: Check of pool pve/data failed (status:1). Manual repair required!Also, ran the below test:
smartctl -a /dev/nvme0n1p3
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.19-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Samsung SSD 980 PRO 1TB
Serial Number: S5GXNF1R861171B
Firmware Version: 3B2QGXA7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 1,000,204,886,016 [1.00 TB]
Unallocated NVM Capacity: 0
Controller ID: 6
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB]
Namespace 1 Utilization: 556,162,486,272 [556 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 b811c41480
Local Time is: Tue Aug 1 16:48:01 2023 BST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 82 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.49W - - 0 0 0 0 0 0
1 + 4.48W - - 1 1 1 1 0 200
2 + 3.18W - - 2 2 2 2 0 1000
3 - 0.0400W - - 3 3 3 3 2000 1200
4 - 0.0050W - - 4 4 4 4 500 9500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 39 Celsius
Available Spare: 96%
Available Spare Threshold: 10%
Percentage Used: 11%
Data Units Read: 377,473,479 [193 TB]
Data Units Written: 126,606,077 [64.8 TB]
Host Read Commands: 4,679,545,077
Host Write Commands: 3,757,429,691
Controller Busy Time: 24,822
Power Cycles: 72
Power On Hours: 9,099
Unsafe Shutdowns: 39
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 39 Celsius
Temperature Sensor 2: 47 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
Can anyone suggest me how to configure it?