intel

Hello I have a Intel NUC Kit NUC8i5BEH running Proxmox and system is freezing randomly and i have to hard reset for it works fine until it happens again. Kernel: 5.15.39-1-pve Version: 7.2-7 /etc/network/interfaces auto vmbr0 iface vmbr0 inet manual bridge-ports eno1...

Hello the Generous and Learned, I am very new to Proxmox and all things Linux. I have made changes (following online guides) to passthrough my discrete GPU to a guest - that works fine. However, I now get no display OUT from the integrated graphics/motherboard. Because of this, I now cannot...

Hello, with kernel 5.15.35 kvm64 migration fails with particular host cpus: Any online migration performed from: - an Intel Gold (6130) or - Intel Silver (4110) CPU to any: - Intel Xeon E5 (1650,2660,2643) fails with Kernel panic stopping the machine and make a cold move is always working...

Hello i NEED HELP to setup gpu passthrough/iommu/AMD 6500XT for Gaming/Folding@Home INTEL Alder Lake i am a big noob i want to install AMD gpu drivers in a Windows 11 PRO VM in Eufi specs are AMD 6500XT/Intel 12600KF so i DONT have IGPU. proxmox running native on AMD 6500XT. Thanks for the...

I've had Proxmox running fine for about 3 years now, have moved installs, moved across drives and never had an issue. All of a sudden, last sunday my server went completely unresponsive and after attaching a monitor it showed a kernel panic. Nothing has changed, even updating to the latest...

Dear, Currently we have some troubles with High IO delay on almost any 'heavy' write on the VM. Our Proxmox is currently installed on Crucial MX500 with ZFS RAID 1. I was searching on the web and I saw that this could happen because of these disks can't handle much IOPS for VM Hosting. I was...

HI! I'm running Proxmox 7.2 on Intel i9-12900 and I can't get Nested Virtualization to work, whenever I try to install WSL2 on a guest VM, after required reboot I get stuck on black screen with Windows logo only (VM still works if I move it to a different node in my cluster with different CPU)...

Hallo, ich habe ein msi z590 torpedo als kleinen homeserver. Das Bord hat zwei Ethernetanschlüsse einen I225 und einen I219-V. Der I219-V wird von Proxmox nicht erkannt. Auch bei der Installation steht der Adapter nicht zur Verfügung. Beim booten von Proxmox kommt die Meldung „NVM checksum is...

Hey all, I normally use the host CPU option when setting up VMs (for best performance). This has worked great for me so far. I have recently setup another host server and set them up in a cluster. The new host has different hardware to the previous servers, so now I have Intel and AMD...

In other words, is the latest Proxmox and the actual kernel capable to fully use all the P-Cores and E-Cores at their maximum ring core frequency? Or the Alder Lake P-cores will be running crippled at 3.6 GHz? I know this is more a Debian issue not a Proxmox issue, but I'm pretty sure some...

Hey all, I'm the proud owner of a B550 F Strix Gaming board with a faulty I225-V Intel chip. I've purchased a PCI Intel 82574L Gigabit card and installed it into a PCI slot on the board as to make the faulty onboard chip redundant. It's worth noting that I'm very newish to all this so I...

Hi, I use intel i5 10500 to host Proxmox VE 7.0-11. Run vm for openwrt, home-assistant and xpenology, and I want add lxc for Plex and Jellyfin. but I cant let lxc use my UHD Graphics 630 for Plex HWtranscode. on host: root@pve:~# ls -l /dev/dri total 0 drwxr-xr-x 2 root root 80 Aug 20...

I just wanted to make sure that we could have an AMD based PBS in order to bckup an Intel PBS infra ? Thanks

Hi, I upgraded from version 6.4 to 7.0 of one of the blades on my Intel Modular Server After reboot multipath not show any device: root@proxmox106:~# multipath -ll root@proxmox106:~# on another node with proxmox 6.4 I have: root@proxmox105:~# multipath -ll sistema (222be000155bb7f72) dm-0...

Hello all, I just bought an Intel NUC 11 Pro and wanted to run some VMs on it via proxmox. First, the installation did not work and aborted with an error. Now I tried the new version with the 5.11 kernel and the installation goes through cleanly and everything works. Unfortunately the network...

After spending the last 2 weeks gouging my eyes out trying to make this work, I am finally asking for help. I have a ASRock B560M Pro 4 with a Core i9 10900(non k). The IGP on comet lake barely works on linux requiring the use of this https://patchwork.freedesktop.org/patch/412664/ kernel...

Hi, I've been stuck on this for almost an entire day now... The documentation in regards to GVT-g isn't that abundant. I expected to be able to use at least two i915-GVTg_V5_4 vGPUs. Instead, I'm only able to use 1 V5_4 or 2 V5_8. The resulting performance in my two VMs is thus absolutely...

I am using Proxmox on an Intel S1200V3RP motherboard with a Xeon 1231v3 for my work purposes. The performance of noVNC is really not that great, especially with Windows virtual machines, they are very slow and laggy. I wonder if I can plug in some discrete graphics card (AMD/Nvidia,...) to...

I have a monitor connected to the Nvidia card in my Proxmox box and have successfully passed it through to a Linux VM. However I find that I must also have the onboard Intel iGPU connected to the monitor for it to work (even if not switched to that input on the monitor), otherwise I just get a...

I have 2x GPUs and an LSI HBA successfully passing through to VMs so I know IOMMU is configured properly and working. SR-IOV is turned on in the MB EUFI BIOS along with the other required settings IOMMU etc. here is my /etc/modules vfio vfio_iommu_type1 vfio_pci vfio_virqfd here is the...