hpe

Hi everyone, I’m planning to configure an HPE ProLiant DL360 Gen11 server with the HPE Ethernet 10Gb 2-port BASE-T BCM57416 adapter (P26253-B21). While this Broadcom adapter is one of the few officially certified options for HPE Gen11 servers, I’ve read about issues with Broadcom NICs in...

Hallo zusammen ich plane einen Proxmox Host mit 4 VMs: 1x DC 1x Filer 1x Terminalserver 2022 mit max. 12 Usern 1x Backup Alles Windows SV 2022 Standard. Kann mir jemand einen passenden Host (Tower) nennen mit max. 16 Kernen (zwecks Lizenzierung?) würde ich sagen, 128 GB RAM? Dell PowerEdge...

Hallo zusammen, ich würde Proxmox gerne verstärkt in unserem Unternehmen einsetzen. Um sicherzustellen, dass es für unsere Bedürfnisse geeignet ist, teste ich es aktuell intensiv. Die Plattform läuft hervorragend – großes Lob an euch, ihr leistet wirklich tolle Arbeit! Allerdings habe ich...

Hello! Starting right away with my hardware: HPE DL380 Gen9 SmartArray P440AR Controller HBA Mode with Seagate Enterprise Performance 10K SAS Disks. In trying to install Proxmox on this Hardware and after booting the Proxmox Installation i can see that Proxmox detects the Disks and searches...

I am planning to purchase a new server and would like to know if it is compatible with Proxmox. Server: "HPE" ProLiant DL20 Gen11 Xeon 2436/32GB/4-Bay SFF 480x4 (P65396-B21) Could you please provide details regarding its compatibility with Proxmox?

Hello, i'm currently trying to set up our new PVE Cluster with 3 Nodes (DL380 G9 with FC Cards which wont show up in Proxmox?), we want to use an HPE 3PAR 9450 but dont know how to configure it?! (But atleast the 3PAR is working) If someone could give me a little walktrough with the steps we...

This is a PSA, not a request for help, it's such a ridiculous issue that hopefully this gets indexed and spares others the frustration. With Proxmox 8, you may find yourself with random crashes with absolutely no logging at any level. If you're running on (ancient) HP systems, check the Power...

Hey community Details: proxmox-ve: 8.1.0 (running kernel: 6.5.11-7-pve) Server HW: 2x Gold 6138 2x 32GB 2133Mhz 2x 300GB HPE SAS HDD 10K 1x Lexar NVME NM620 1TB (on PCIE adapter card) 1x TeamGroup M2 Sata SSD 512GB boot drive (on primary riser card) Both nvme and m2 sata report temperature...

Hey all, I have a DL gen10 server that I installed an HPE dual 10Gb 560FLR-SFP+ Adapter into. I've found that it will not pass bond0/LACP communication. An Intel X520-T2 with the same interface bond0/LACP config connects without issue. The switch shows LACP is communicating/connected. Does...

Good afternoon, I was curious if anyone has experienced proxmox resetting some of its network settings after reboot. I cold reboot the server and the host ip changed back to the default ip of 192.168.1.100. The vrbr0 still held my static ip however. I changed the host back but have lost...

I've got four HP DL360 G9 servers, which I intend to use in a hyper-converged cluster setup with CEPH. All of them are of the same hardware configuration: two sockets with Intel(R) Xeon(R) CPU E5-2699 v4 processors @ 2.20GHz (88 cores per server in total), 768GiB of registered DDR4 RAM...

We want to install Proxmox Version 6 on an HP-Server with the following RAID-Controllers: Servers: HPE ProLiant ML110 G10 (Intel Xeon Silver 4210 2,20 GHz) HPE ProLiant DL360 G10 (Intel Xeon Silver 4208 2,10 GHz) HPE Smart Array P408i-a/2GB plus Smart Storage-Batterie HPE Smart Array P408i-p...

Hello everyone! I am interested in purchasing HPE ProLiant DL160 Gen10. I've tried to check the manufacturer's website for compatibility issues with Proxmox 6.3, however, I could not find any information about it there. I wanted to ask if any of you have this hardware and could share...

Hi all, So I tried to install Proxmox VE 6.0.1 on an HP Blade server (HPE BladeSystem c7000 Enclosures ) through it's iLO and I almost managed to install it. Unfortunately during installation, something happened that made the installation failed at 75% in assumption where it cannot install...

Hi everyone, I'm actually trying to build a Proxmox cluster of HP DL380 G5 (kind of old school but effective...) and, following Ceph instructions, I just made a RAID 1 for my OS (Proxmox) partition and let others drives free, in no RAID. The problem is that they are not showing in my proxmox...