/etc/network/interfaces

Wondering if anyone can help me with this. I can access my proxmox instance and upload ISO's etc, however I just want to connect my vm's to the internet. I am renting a server from hetzner and have two IPs from them. From the documentation I have seen I am wanting to set up a bridged network...

I have multiple interfaces going into PVE. My server has the following interface built in (Primary: enp87s0) which does not have native drivers built into the kernel. I've been able to install the drivers and get it working on 192.168.1.75/24 (vmbr0 on PVE). For redundancy, I wanted an interface...

So i just installed a new interface which i had laying around (it was really cheap). And my goal is to use that INterface in a other Network. But i doesnt show up in the webgui and int the interface file it also doesnt show up. Is the Interface maybe incompatible with Proxmox or are some...

Hi there So i just upgraded my proxmox from version 7 to 8. After the update my Proxmox didnt come online again. After reading some Threads i saw that qith the kernel update the Interfaces change nam. I tried to rename them in /etc/network/interfaces and then restart the aervice. No luck. After...

Hey guys, after a bit of fiddling I managed to get my Proxmox connected to internet by changing the IP in /etc/network/interfaces and etc/hosts to my new IP 192.168.2.69, though after restarting I cannot access the GUI of my Proxmox instance. I am using a Unifi Cloud Gateway Ultra and Proxmox...

Hi, This is my first post on this forum, so please bare with me. I've searched the interwebz without finding an answer so thought I'd just test my luck here. Im configuring a new Proxmox hypervisor and I'm wondering about the proper way to Dot1Q the traffic going to the management IP of the...

Hi, I recently attempted to change the IP address of my Proxmox server (192.168.3.12---> 192.168.10.54) and updated it in the /etc/network/interfaces file but to no success. Surprisingly, reverting to the old IP (192.168.3.12) while connected to the (192.168.10.XX) network resolved the issue...

I want to set different outgoing 802.1(p) QoS tags on each VLAN for QoS purposes. Local test cluster is a Proxmox VE recently updated 8.1 no pending packages at this time everything other than 802.1(p) tagging works great including CEPH, have SDN installed although not using, and have open...

I'm running Proxmox on a Debian VM in Azure (i know, i know, I have my reasons). When I went to start a LXC I received an error saying it could not start because bridge vmbr0 doesn't exist. I went to add it in network interfaces and my code is below, but this borked my network and...

Hello guys! I found myself in a tight spot. Yesterday, my galaxy brain decided that it would be nice to upgrade Proxmox 7 to 8 remotely. I have a VPN set up in my router, and I've been remoting in with no problem for the past 2 years (server is 3000km away). I started playing around like many...

Hello! i use server from Equinix to build Proxmox Server, and default IPv4 from Equinix 147.28.157.101/31 with it i add IP Elastic and binding in dashboard with IPv4 145.40.71.144/28 after i create linux bridge vmbr0 i can't access Web GUI and unable to login to server via SSH. can anyone help...

Hello Proxmox community, I'm currently trying to manage network interfaces in Proxmox VE using Ansible, and I'm running into a problem where the changes I make don't persist as I would expect. I have read the official Proxmox documentation and am aware that Proxmox VE does not write changes...

Hello everyone, everything good? I'm just starting out in this area of virtualizers and I wanted to see if any of you have already faced this situation and know how to solve it, which is as follows: I turned on a Dell R610 server and connected an ethernet cable to a mikrotik, I configured the...

Hey, Ich habe jetzt in den letzten tage so viele Beiträge gelesen und getestet aber noch bin ich nicht am ziel wie erwartet. So kommen wir mal zum Problem: Ich habe eine Haupt IP nenne wir die mal <1>.244 und habe mir jetzt eine einzelne Zusatz IP gekauft die wir <2>.253 nennen. Das Problem ist...

I changed the interface in /etc/network/interfaces, now it has an IP on my home network. But something is messed up in the config. Im not a networking expert nor deep einough in IT to be able to figure out what could be the problem. Here is my current /etc/network/interfaces

Hi there, I am trying to create 2 VLANs or several of my VMs. The 2 VLANs in question are VLAN10 and VLAN20. They're a part of my network topology as seen in the image below: The issue here is that I have a VM or two that I need in VLAN10 (such as my AdGuardHome DNS server), while I plan to...

If this is the wrong forum I apologize, please move my post to the correct forum. I've recently set up a Supermicro(Motherboard Link) server with Proxmox (Proxmox VE 7.2) I am unable to set up a working internet connection. If I use a USB to boot into a live Ubuntu OS the internet works fine...

Hi, I'm having a problem with Qualcomm Atheros QCA6174 802.11ac (M.2 2230) wireless NIC. I installed proxmox on a protectli device and it works fine except for this wifi card. The adapter doesn't show up in /etc/network/interfaces. I see this adapter only when I run the "lspci" command. What...

I just installed an OS on top of PVE (MacOS Big Sur to be precise). I have a Realtek WiFi dongle USB (RTL8188EU). I have configured my /etc/network/interfaces file with wlan interface set to dhcp with wpa-ssid and wpa-key enabled as well as using allow-hotplug. But if I started my VM, booting up...

Hi, So I have my ProxMox Server with two Network Interfaces and one Bridge interface. My Main Network interface is connected to the Main Network which has access to the Internet. The Bridge interface is on subnet 192.168.0.0/24. Now, I added a second interface in which I want to connect a...