Proxmox VE 3.0 released!

you must use kernel 2.6.32 "pve".
This is NOT a Debian Kernel but RH6x kernel, this is a 2.6.32 version drugged with a lot fix and improvements (and driver update) derived from the latest kernel version.
 
Thanks, I thought so.
I didn't have any problems with the 3.2 kernel on Proxmox, using only KVM. Obviously, OpenVZ containers didn't work because it was non-openvz kernel.
 
mipsH said:
Great Work :)

It will be great thing to implement OpenVZ Containers Templates and Clones from the GUI also (same as for VM Templates and Clones).
Click to expand...

we have OpenVZ templates since 2008 - seems you missed that :)
 
jsjostrom said:
Hello,
Are there any plans for moving to kernel 3.2 in proxmox?

Regards,
Jussi
Click to expand...

no, proxmox ve uses RHEL kernels only. (RHEL6 is based on 2.6.32, upcoming RHEL7 is based on 3.9 or higher)
 
I have a problem:

Code: 
# ./pve-upgrade-2.3-to-3.0apt-get update
Hit http://download.proxmox.com wheezy Release.gpg
Ign http://download.proxmox.com/debian/ wheezy/pve2.2 Translation-en
Hit http://http.at.debian.org wheezy Release.gpg
...
Hit http://security.debian.org wheezy/updates/main amd64 Packages
Hit http://security.debian.org wheezy/updates/contrib amd64 Packages
W: Failed to fetch http://download.proxmox.com/debian/dists/wheezy/Release  Unable to find expected entry  pve2.2/binary-amd64/Packages in Meta-index file (malformed Release file?)


E: Some index files failed to download, they have been ignored, or old ones used instead.
apt-get -f install
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 362 not upgraded.
apt-get install debian-archive-keyring
Reading package lists...
Building dependency tree...
Reading state information...
debian-archive-keyring is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 362 not upgraded.
sed -i -e "s/squeeze/wheezy/" /etc/apt/sources.list
apt-get update
Hit http://download.proxmox.com wheezy Release.gpg
Ign http://download.proxmox.com/debian/ wheezy/pve2.2 Translation-en
Hit http://http.at.debian.org wheezy Release.gpg
...
Ign http://http.at.debian.org/debian/ wheezy/main Translation-en_USHit http://http.at.debian.org wheezy Release
Hit http://security.debian.org wheezy/updates/contrib amd64 Packages
Hit http://http.at.debian.org wheezy/main amd64 PackagesHit http://http.at.debian.org wheezy/contrib amd64 Packages
W: Failed to fetch http://download.proxmox.com/debian/dists/wheezy/Release  Unable to find expected entry  pve2.2/binary-amd64/Packages in Meta-index file (malformed Release file?)


E: Some index files failed to download, they have been ignored, or old ones used instead.

My Proxmox version:
Code: 
# pveversion -vpve-manager: 2.3-13 (pve-manager/2.3/7946f1f1)
running kernel: 2.6.32-19-pve
proxmox-ve-2.6.32: 2.3-93
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-19-pve: 2.6.32-93
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-4
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-36
qemu-server: 2.3-18
pve-firmware: 1.0-21
libpve-common-perl: 1.0-49
libpve-access-control: 1.0-26
libpve-storage-perl: 2.3-6
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.4-8
ksm-control-daemon: 1.1-1

And sourcelist:
Code: 
# cat /etc/apt/sources.listdeb http://http.at.debian.org/debian wheezy main contrib


# PVE packages provided by proxmox.com
deb http://download.proxmox.com/debian wheezy pve2.2


# security updates
deb http://security.debian.org/ wheezy/updates main contrib
 
I've download and tested 3.0... Not sure if anyone posted before but I no longer see the Proxmox version show up on GUI as in 2.3 next to proxmox logo. It's nice to see the software version displayed once logged in via browser.

Also, in 2.3 I believe I was asked if wanted to encrypt hard drive or some partitions during install - didn't notice that for 3.0...

Thanks for great software!!!

--Joe
 
joeleo said:
I've download and tested 3.0... Not sure if anyone posted before but I no longer see the Proxmox version show up on GUI as in 2.3 next to proxmox logo. It's nice to see the software version displayed once logged in via browser.
Click to expand...

this is a known issue on your local browser. just clear all cached items in your browser. in latest packages (from pvetest) you also see detailed version (pveversion -v) on the gui.

joeleo said:
Also, in 2.3 I believe I was asked if wanted to encrypt hard drive or some partitions during install - didn't notice that for 3.0...

Thanks for great software!!!

--Joe
Click to expand...

encryption is not implemented, did you filed an enhancement request (in our bugtracker) with detailed specs/wishes?
 
Will the link upgrade from a 2.2-32 version up to 3.0 or do I need to do an update to 2.3 before I update to 3.0?
 
This is an outdated Repo for the 3ware controller CLI and 3dm2 webtool. Remove the lines in /etc/apt/sources.list.

This repo is not longer needed. Go to the 3ware support page and download the latest cli/3dm2 installation package. This installs pretty easy with a shell script on all linux distros. No .deb needed anymore.
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back