Out of RAID drives / standalone drives not detected by Proxmox

T

tigerblue77

Active Member
Dec 20, 2019
11
3
43
26
Hi everyone,

I'm actually trying to build a Proxmox cluster of HP DL380 G5 (kind of old school but effective...) and, following Ceph instructions, I just made a RAID 1 for my OS (Proxmox) partition and let others drives free, in no RAID.

The problem is that they are not showing in my proxmox host

1576855297297.png

How should I proceed to make them accessible and add them to ceph ? Thanks !
 
tigerblue77 said:
Are you sure that I have to make 6 RAID 0 ? (1 per drive)

Performance is not a problem actually, it's only for testing purpose :)
Click to expand...

Yes until you setup some form of raid on the HP controller it will not pass through the disk to the OS.

Make 6 indvidual Raid 0 (1 per a drive) in the HP Raid setup and Promox will then see these.
 
sg90 said:
Yes until you setup some form of raid on the HP controller it will not pass through the disk to the OS.

Make 6 indvidual Raid 0 (1 per a drive) in the HP Raid setup and Promox will then see these.
Click to expand...
Okay ! Thanks for your answer, have a good christmas ! :)
 
You must log in or register to reply here.
Top Bottom