updated everything to latest versions, still failing. 
Code:
root@pmx1:~# pveversion -v
proxmox-ve: 4.3-71 (running kernel: 4.4.21-1-pve)
pve-manager: 4.3-10 (running version: 4.3-10/7230e60f)
pve-kernel-4.4.21-1-pve: 4.4.21-71
pve-kernel-4.4.19-1-pve: 4.4.19-66
lvm2: 2.02.116-pve3
corosync-pve: 2.4.0-1
libqb0: 1.0-1
pve-cluster: 4.0-47
qemu-server: 4.0-94
pve-firmware: 1.1-10
libpve-common-perl: 4.0-80
libpve-access-control: 4.0-19
libpve-storage-perl: 4.0-68
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-docs: 4.3-14
pve-qemu-kvm: 2.7.0-6
pve-container: 1.0-81
pve-firewall: 2.0-31
pve-ha-manager: 1.0-35
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 2.0.5-1
lxcfs: 2.0.4-pve2
criu: 1.6.0-1
novnc-pve: 0.5-8
smartmontools: 6.5+svn4324-1~pve80
zfsutils: 0.6.5.8-pve13~bpo80
okay, that seems rather strange.. usually it's the opposite way (disk-by-id not working because of missing links). could you post the output of
"ls -l /dev/disk/by-id" and "ls -l /dev/" when dropped to the initramfs shell? note that since you are able to import the pool and boot afterwards, you should be able to save the output by redirecting it to a file in /run/... which will stay around until rebooting (so no need for screenshots or photos).
another thing that I'd like to check is whether a cachefile exists in the initramfs and/or the host (check for "/etc/zfs/zpool.cache" in the initramfs shell and when booted).
finally, did you already try regenerating the initramfs with "update-intiramfs -u" ?
"ls -l /dev/disk/by-id" and "ls -l /dev/" when dropped to the initramfs shell? note that since you are able to import the pool and boot afterwards, you should be able to save the output by redirecting it to a file in /run/... which will stay around until rebooting (so no need for screenshots or photos
).another thing that I'd like to check is whether a cachefile exists in the initramfs and/or the host (check for "/etc/zfs/zpool.cache" in the initramfs shell and when booted).
finally, did you already try regenerating the initramfs with "update-intiramfs -u" ?
As requested:
Code:
root@pmx1:/run# more by.id.txt
total 0
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX -> ../../sdd
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part1 -> ../../sdd1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part2 -> ../../sdd2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part9 -> ../../sdd9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX -> ../../sdc
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part1 -> ../../sdc1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part2 -> ../../sdc2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part9 -> ../../sdc9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX -> ../../sdb
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part1 -> ../../sdb1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part2 -> ../../sdb2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part9 -> ../../sdb9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX -> ../../sda
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part1 -> ../../sda1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part2 -> ../../sda2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 ata-ST3500418AS_XXXXXXXX-part9 -> ../../sda9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 wwn-0x5000c5002022c6ae -> ../../sdc
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c5002022c6ae-part1 -> ../../sdc1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c5002022c6ae-part2 -> ../../sdc2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c5002022c6ae-part9 -> ../../sdc9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 wwn-0x5000c50022379f0c -> ../../sdd
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c50022379f0c-part1 -> ../../sdd1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c50022379f0c-part2 -> ../../sdd2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c50022379f0c-part9 -> ../../sdd9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 wwn-0x5000c50026c72baf -> ../../sdb
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c50026c72baf-part1 -> ../../sdb1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c50026c72baf-part2 -> ../../sdb2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c50026c72baf-part9 -> ../../sdb9
lrwxrwxrwx 1 0 0 9 Nov 28 15:55 wwn-0x5000c5003fa3b51f -> ../../sda
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c5003fa3b51f-part1 -> ../../sda1
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c5003fa3b51f-part2 -> ../../sda2
lrwxrwxrwx 1 0 0 10 Nov 28 15:55 wwn-0x5000c5003fa3b51f-part9 -> ../../sda9
Last edited:
and..
Code:
root@pmx1:/run# more dev.txt
total 0
drwxr-xr-x 2 0 0 840 Nov 28 15:55 block
drwxr-xr-x 2 0 0 120 Nov 28 15:55 bsg
crw------- 1 0 0 10, 234 Nov 28 15:55 btrfs-control
drwxr-xr-x 3 0 0 60 Nov 28 15:54 bus
drwxr-xr-x 2 0 0 3200 Nov 28 15:55 char
crw------- 1 0 0 5, 1 Nov 28 15:54 console
lrwxrwxrwx 1 0 0 11 Nov 28 15:54 core -> /proc/kcore
drwxr-xr-x 2 0 0 60 Nov 28 15:54 cpu
crw------- 1 0 0 10, 59 Nov 28 15:54 cpu_dma_latency
drwxr-xr-x 5 0 0 100 Nov 28 15:55 disk
crw------- 1 0 0 10, 61 Nov 28 15:54 ecryptfs
lrwxrwxrwx 1 0 0 13 Nov 28 15:54 fd -> /proc/self/fd
crw-rw-rw- 1 0 0 1, 7 Nov 28 15:54 full
crw-rw-rw- 1 0 0 10, 229 Nov 28 15:54 fuse
crw------- 1 0 0 247, 0 Nov 28 15:54 hidraw0
crw------- 1 0 0 247, 1 Nov 28 15:54 hidraw1
crw------- 1 0 0 10, 228 Nov 28 15:54 hpet
crw------- 1 0 0 10, 183 Nov 28 15:54 hwrng
drwxr-xr-x 2 0 0 160 Nov 28 15:54 input
crw-r--r-- 1 0 0 1, 11 Nov 28 15:54 kmsg
drwxr-xr-x 2 0 0 60 Nov 28 15:54 lightnvm
crw------- 1 0 0 10, 237 Nov 28 15:54 loop-control
brw------- 1 0 0 7, 0 Nov 28 15:54 loop0
brw------- 1 0 0 7, 1 Nov 28 15:54 loop1
brw------- 1 0 0 7, 2 Nov 28 15:54 loop2
brw------- 1 0 0 7, 3 Nov 28 15:54 loop3
brw------- 1 0 0 7, 4 Nov 28 15:54 loop4
brw------- 1 0 0 7, 5 Nov 28 15:54 loop5
brw------- 1 0 0 7, 6 Nov 28 15:54 loop6
brw------- 1 0 0 7, 7 Nov 28 15:54 loop7
drwxr-xr-x 2 0 0 60 Nov 28 15:54 mapper
crw------- 1 0 0 10, 227 Nov 28 15:54 mcelog
crw-r----- 1 0 0 1, 1 Nov 28 15:54 mem
crw------- 1 0 0 10, 56 Nov 28 15:54 memory_bandwidth
drwxr-xr-x 2 0 0 60 Nov 28 15:54 net
crw------- 1 0 0 10, 58 Nov 28 15:54 network_latency
crw------- 1 0 0 10, 57 Nov 28 15:54 network_throughput
crw-rw-rw- 1 0 0 1, 3 Nov 28 15:54 null
crw-r----- 1 0 0 1, 4 Nov 28 15:54 port
crw------- 1 0 0 108, 0 Nov 28 15:54 ppp
crw------- 1 0 0 10, 1 Nov 28 15:54 psaux
crw-rw-rw- 1 0 0 5, 2 Nov 28 15:54 ptmx
drwxr-xr-x 2 0 0 0 Nov 28 15:54 pts
brw------- 1 0 0 1, 0 Nov 28 15:54 ram0
brw------- 1 0 0 1, 1 Nov 28 15:54 ram1
brw------- 1 0 0 1, 10 Nov 28 15:54 ram10
brw------- 1 0 0 1, 11 Nov 28 15:54 ram11
brw------- 1 0 0 1, 12 Nov 28 15:54 ram12
brw------- 1 0 0 1, 13 Nov 28 15:54 ram13
brw------- 1 0 0 1, 14 Nov 28 15:54 ram14
brw------- 1 0 0 1, 15 Nov 28 15:54 ram15
brw------- 1 0 0 1, 2 Nov 28 15:54 ram2
brw------- 1 0 0 1, 3 Nov 28 15:54 ram3
brw------- 1 0 0 1, 4 Nov 28 15:54 ram4
brw------- 1 0 0 1, 5 Nov 28 15:54 ram5
brw------- 1 0 0 1, 6 Nov 28 15:54 ram6
brw------- 1 0 0 1, 7 Nov 28 15:54 ram7
brw------- 1 0 0 1, 8 Nov 28 15:54 ram8
brw------- 1 0 0 1, 9 Nov 28 15:54 ram9
crw-rw-rw- 1 0 0 1, 8 Nov 28 15:54 random
crw-rw-r-- 1 0 0 10, 62 Nov 28 15:54 rfkill
lrwxrwxrwx 1 0 0 4 Nov 28 15:54 rtc -> rtc0
crw------- 1 0 0 251, 0 Nov 28 15:54 rtc0
brw------- 1 0 0 8, 0 Nov 28 15:55 sda
brw------- 1 0 0 8, 1 Nov 28 15:55 sda1
brw------- 1 0 0 8, 2 Nov 28 15:55 sda2
brw------- 1 0 0 8, 9 Nov 28 15:55 sda9
brw------- 1 0 0 8, 16 Nov 28 15:55 sdb
brw------- 1 0 0 8, 17 Nov 28 15:55 sdb1
brw------- 1 0 0 8, 18 Nov 28 15:55 sdb2
brw------- 1 0 0 8, 25 Nov 28 15:55 sdb9
brw------- 1 0 0 8, 32 Nov 28 15:55 sdc
brw------- 1 0 0 8, 33 Nov 28 15:55 sdc1
brw------- 1 0 0 8, 34 Nov 28 15:55 sdc2
brw------- 1 0 0 8, 41 Nov 28 15:55 sdc9
brw------- 1 0 0 8, 48 Nov 28 15:55 sdd
brw------- 1 0 0 8, 49 Nov 28 15:55 sdd1
brw------- 1 0 0 8, 50 Nov 28 15:55 sdd2
brw------- 1 0 0 8, 57 Nov 28 15:55 sdd9
crw------- 1 0 0 21, 0 Nov 28 15:55 sg0
crw------- 1 0 0 21, 1 Nov 28 15:55 sg1
crw------- 1 0 0 21, 2 Nov 28 15:54 sg2
crw------- 1 0 0 21, 3 Nov 28 15:55 sg3
crw------- 1 0 0 10, 231 Nov 28 15:54 snapshot
lrwxrwxrwx 1 0 0 15 Nov 28 15:54 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 0 0 15 Nov 28 15:54 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 0 0 15 Nov 28 15:54 stdout -> /proc/self/fd/1
crw-rw-rw- 1 0 0 5, 0 Nov 28 15:54 tty
crw--w---- 1 0 0 4, 0 Nov 28 15:54 tty0
crw--w---- 1 0 0 4, 1 Nov 28 15:54 tty1
crw--w---- 1 0 0 4, 10 Nov 28 15:54 tty10
crw--w---- 1 0 0 4, 11 Nov 28 15:54 tty11
crw--w---- 1 0 0 4, 12 Nov 28 15:54 tty12
crw--w---- 1 0 0 4, 13 Nov 28 15:54 tty13
crw--w---- 1 0 0 4, 14 Nov 28 15:54 tty14
crw--w---- 1 0 0 4, 15 Nov 28 15:54 tty15
crw--w---- 1 0 0 4, 16 Nov 28 15:54 tty16
crw--w---- 1 0 0 4, 17 Nov 28 15:54 tty17
crw--w---- 1 0 0 4, 18 Nov 28 15:54 tty18
crw--w---- 1 0 0 4, 19 Nov 28 15:54 tty19
crw--w---- 1 0 0 4, 2 Nov 28 15:54 tty2
crw--w---- 1 0 0 4, 20 Nov 28 15:54 tty20
crw--w---- 1 0 0 4, 21 Nov 28 15:54 tty21
crw--w---- 1 0 0 4, 22 Nov 28 15:54 tty22
crw--w---- 1 0 0 4, 23 Nov 28 15:54 tty23
crw--w---- 1 0 0 4, 24 Nov 28 15:54 tty24
crw--w---- 1 0 0 4, 25 Nov 28 15:54 tty25
crw--w---- 1 0 0 4, 26 Nov 28 15:54 tty26
crw--w---- 1 0 0 4, 27 Nov 28 15:54 tty27
crw--w---- 1 0 0 4, 28 Nov 28 15:54 tty28
crw--w---- 1 0 0 4, 29 Nov 28 15:54 tty29
crw--w---- 1 0 0 4, 3 Nov 28 15:54 tty3
crw--w---- 1 0 0 4, 30 Nov 28 15:54 tty30
crw--w---- 1 0 0 4, 31 Nov 28 15:54 tty31
crw--w---- 1 0 0 4, 32 Nov 28 15:54 tty32
crw--w---- 1 0 0 4, 33 Nov 28 15:54 tty33
crw--w---- 1 0 0 4, 34 Nov 28 15:54 tty34
crw--w---- 1 0 0 4, 35 Nov 28 15:54 tty35
crw--w---- 1 0 0 4, 36 Nov 28 15:54 tty36
crw--w---- 1 0 0 4, 37 Nov 28 15:54 tty37
crw--w---- 1 0 0 4, 38 Nov 28 15:54 tty38
crw--w---- 1 0 0 4, 39 Nov 28 15:54 tty39
crw--w---- 1 0 0 4, 4 Nov 28 15:54 tty4
crw--w---- 1 0 0 4, 40 Nov 28 15:54 tty40
crw--w---- 1 0 0 4, 41 Nov 28 15:54 tty41
crw--w---- 1 0 0 4, 42 Nov 28 15:54 tty42
crw--w---- 1 0 0 4, 43 Nov 28 15:54 tty43
crw--w---- 1 0 0 4, 44 Nov 28 15:54 tty44
crw--w---- 1 0 0 4, 45 Nov 28 15:54 tty45
crw--w---- 1 0 0 4, 46 Nov 28 15:54 tty46
crw--w---- 1 0 0 4, 47 Nov 28 15:54 tty47
crw--w---- 1 0 0 4, 48 Nov 28 15:54 tty48
crw--w---- 1 0 0 4, 49 Nov 28 15:54 tty49
crw--w---- 1 0 0 4, 5 Nov 28 15:54 tty5
crw--w---- 1 0 0 4, 50 Nov 28 15:54 tty50
crw--w---- 1 0 0 4, 51 Nov 28 15:54 tty51
crw--w---- 1 0 0 4, 52 Nov 28 15:54 tty52
crw--w---- 1 0 0 4, 53 Nov 28 15:54 tty53
crw--w---- 1 0 0 4, 54 Nov 28 15:54 tty54
crw--w---- 1 0 0 4, 55 Nov 28 15:54 tty55
crw--w---- 1 0 0 4, 56 Nov 28 15:54 tty56
crw--w---- 1 0 0 4, 57 Nov 28 15:54 tty57
crw--w---- 1 0 0 4, 58 Nov 28 15:54 tty58
crw--w---- 1 0 0 4, 59 Nov 28 15:54 tty59
crw--w---- 1 0 0 4, 6 Nov 28 15:54 tty6
crw--w---- 1 0 0 4, 60 Nov 28 15:54 tty60
crw--w---- 1 0 0 4, 61 Nov 28 15:54 tty61
crw--w---- 1 0 0 4, 62 Nov 28 15:54 tty62
crw--w---- 1 0 0 4, 63 Nov 28 15:54 tty63
crw--w---- 1 0 0 4, 7 Nov 28 15:54 tty7
crw--w---- 1 0 0 4, 8 Nov 28 15:54 tty8
crw--w---- 1 0 0 4, 9 Nov 28 15:54 tty9
crw------- 1 0 0 4, 64 Nov 28 15:54 ttyS0
crw------- 1 0 0 4, 65 Nov 28 15:54 ttyS1
crw------- 1 0 0 4, 74 Nov 28 15:54 ttyS10
crw------- 1 0 0 4, 75 Nov 28 15:54 ttyS11
crw------- 1 0 0 4, 76 Nov 28 15:54 ttyS12
crw------- 1 0 0 4, 77 Nov 28 15:54 ttyS13
crw------- 1 0 0 4, 78 Nov 28 15:54 ttyS14
crw------- 1 0 0 4, 79 Nov 28 15:54 ttyS15
crw------- 1 0 0 4, 80 Nov 28 15:54 ttyS16
crw------- 1 0 0 4, 81 Nov 28 15:54 ttyS17
crw------- 1 0 0 4, 82 Nov 28 15:54 ttyS18
crw------- 1 0 0 4, 83 Nov 28 15:54 ttyS19
crw------- 1 0 0 4, 66 Nov 28 15:54 ttyS2
crw------- 1 0 0 4, 84 Nov 28 15:54 ttyS20
crw------- 1 0 0 4, 85 Nov 28 15:54 ttyS21
crw------- 1 0 0 4, 86 Nov 28 15:54 ttyS22
crw------- 1 0 0 4, 87 Nov 28 15:54 ttyS23
crw------- 1 0 0 4, 88 Nov 28 15:54 ttyS24
crw------- 1 0 0 4, 89 Nov 28 15:54 ttyS25
crw------- 1 0 0 4, 90 Nov 28 15:54 ttyS26
crw------- 1 0 0 4, 91 Nov 28 15:54 ttyS27
crw------- 1 0 0 4, 92 Nov 28 15:54 ttyS28
crw------- 1 0 0 4, 93 Nov 28 15:54 ttyS29
crw------- 1 0 0 4, 67 Nov 28 15:54 ttyS3
crw------- 1 0 0 4, 94 Nov 28 15:54 ttyS30
crw------- 1 0 0 4, 95 Nov 28 15:54 ttyS31
crw------- 1 0 0 4, 68 Nov 28 15:54 ttyS4
crw------- 1 0 0 4, 69 Nov 28 15:54 ttyS5
crw------- 1 0 0 4, 70 Nov 28 15:54 ttyS6
crw------- 1 0 0 4, 71 Nov 28 15:54 ttyS7
crw------- 1 0 0 4, 72 Nov 28 15:54 ttyS8
crw------- 1 0 0 4, 73 Nov 28 15:54 ttyS9
crw------- 1 0 0 5, 3 Nov 28 15:54 ttyprintk
crw------- 1 0 0 10, 223 Nov 28 15:54 uinput
crw-rw-rw- 1 0 0 1, 9 Nov 28 15:54 urandom
crw------- 1 0 0 7, 0 Nov 28 15:54 vcs
crw------- 1 0 0 7, 1 Nov 28 15:54 vcs1
crw------- 1 0 0 7, 128 Nov 28 15:54 vcsa
crw------- 1 0 0 7, 129 Nov 28 15:54 vcsa1
crw------- 1 0 0 10, 63 Nov 28 15:54 vga_arbiter
crw-rw-rw- 1 0 0 1, 5 Nov 28 15:54 zero
crw------- 1 0 0 10, 55 Nov 28 15:55 zfsif you are willing to try some more stuff, although now it's more or less stabbing in the dark, you could try to scan for the pool using "zpool import -d /dev"? and could you post the kernel commandline ("cat /proc/cmdline")
two more things that might be interesting:
two more things that might be interesting:
- booting with the kernel parameter "zfsdebug=1" (e.g., by editing the boot entry in the grub menu and adding the parameter to the line starting with "linux" and pressing the key combination shown on the bottom in order to boot it)
- setting "ZPOOL_IMPORT_PATH" in /etc/default/zfs to "/dev/disk/by-vdev:/dev/disk/by-id" and regenerating the initramfs with "update-initramfs -u" to force mounting with IDs
I was getting the same error.
Clean install Proxmox VE 4.4 ZFS RAID0 with 1 disk (made this so I can upgrade to RAID1 later by adding another disk)
Was fixed by:
setting "ZPOOL_IMPORT_PATH" in /etc/default/zfs to "/dev/disk/by-vdev:/dev/disk/by-id" and regenerating the initramfs with "update-initramfs -u" to force mounting with IDs
Clean install Proxmox VE 4.4 ZFS RAID0 with 1 disk (made this so I can upgrade to RAID1 later by adding another disk)
Was fixed by:
setting "ZPOOL_IMPORT_PATH" in /etc/default/zfs to "/dev/disk/by-vdev:/dev/disk/by-id" and regenerating the initramfs with "update-initramfs -u" to force mounting with IDs
I put this here to be found by a guy that might have the problem I faced (server have 3 disks - dedibox PRO 2016.
I faced the same issue with one server : busybox / rpool cannot be imported, zpool import shows nothing, zpool detect nothing even with a live CD etc.
Solution :
My server was previously configured with Linux RAID (mdadm etc.) ! I thought that the installer was reseting the disk but that was not the case !
Linux was detecting the raid, using it, and blocking zfs operation.
"mdadm --zero-superblock " all the disk, and everything run smooth.
I faced the same issue with one server : busybox / rpool cannot be imported, zpool import shows nothing, zpool detect nothing even with a live CD etc.
Solution :
My server was previously configured with Linux RAID (mdadm etc.) ! I thought that the installer was reseting the disk but that was not the case !
Linux was detecting the raid, using it, and blocking zfs operation.
"mdadm --zero-superblock " all the disk, and everything run smooth.
I tried this but dont work.
I mean, when i boot in emergency the zpool import -aN /dev.... works, but when I boot again without emergency mode, it dont work.
I´ve tried the rootdelay option too, but still failing.
The zfsutils version is the 0.6.5.9-pve15 bpo80
¿What is going wrong?
hi
I got 'kernel panic' after reboot and i have regenerated the initramfs ("update-initramfs -u")
"[ end Kernel panic - not syncing: VFS: Unable to mount root fs
on unknown-block(0,0)"
need help
thanks
I am having the exact same issue since updating recently. I always keep my system up to date and was notified of an update. I ran the update and didn't think anything about it. I tried to add a new CT and was getting an error saying it could not save dso I rebooted and ended up with the "Failed to import pool 'rpool'" error.
For me, I am able to run this command:
I follow this by exit and the system boots as normal.
I tried adding the "ZPOOL_IMPORT_PATH" in /etc/default/zfs to "/dev/disk/by-vdev:/dev/disk/by-id" and regenerating the initramfs with "update-initramfs -u" to force mounting with IDs, but it still fails forcing me to manually do the zpool import command above every boot.
Setting a boot delay at boot (e at the Grub prompt, adding bootdelay=30 to the linux line) did not help either.
I AM NOT running any ZFS enabled VMs (like FreeNAS). The system was running (and rebooting) fine until the last update.
Looking for ideas.
Thanks
For me, I am able to run this command:
Code:
zpool import -aN -d /dev/disk/by-id -o cachefile=noneI follow this by exit and the system boots as normal.
I tried adding the "ZPOOL_IMPORT_PATH" in /etc/default/zfs to "/dev/disk/by-vdev:/dev/disk/by-id" and regenerating the initramfs with "update-initramfs -u" to force mounting with IDs, but it still fails forcing me to manually do the zpool import command above every boot.
Setting a boot delay at boot (e at the Grub prompt, adding bootdelay=30 to the linux line) did not help either.
I AM NOT running any ZFS enabled VMs (like FreeNAS). The system was running (and rebooting) fine until the last update.
Looking for ideas.
Thanks
Code:
root@proxmox:~# pveversion -v
proxmox-ve: 5.1-25 (running kernel: 4.13.4-1-pve)
pve-manager: 5.1-36 (running version: 5.1-36/131401db)
pve-kernel-4.13.4-1-pve: 4.13.4-25
pve-kernel-4.10.17-4-pve: 4.10.17-24
pve-kernel-4.10.17-2-pve: 4.10.17-20
pve-kernel-4.10.15-1-pve: 4.10.15-15
pve-kernel-4.10.17-3-pve: 4.10.17-23
libpve-http-server-perl: 2.0-6
lvm2: 2.02.168-pve6
corosync: 2.4.2-pve3
libqb0: 1.0.1-1
pve-cluster: 5.0-15
qemu-server: 5.0-17
pve-firmware: 2.0-3
libpve-common-perl: 5.0-20
libpve-guest-common-perl: 2.0-13
libpve-access-control: 5.0-7
libpve-storage-perl: 5.0-16
pve-libspice-server1: 0.12.8-3
vncterm: 1.5-2
pve-docs: 5.1-12
pve-qemu-kvm: 2.9.1-2
pve-container: 2.0-17
pve-firewall: 3.0-3
pve-ha-manager: 2.0-3
ksm-control-daemon: 1.2-2
glusterfs-client: 3.8.8-1
lxc-pve: 2.1.0-2
lxcfs: 2.0.7-pve4
criu: 2.11.1-1~bpo90
novnc-pve: 0.6-4
smartmontools: 6.5+svn4324-1
zfsutils-linux: 0.7.2-pve1~bpo90
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
font="/ROOT/pve-1@/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Proxmox Virtual Environment GNU/Linux' --class proxmox --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f9e591d1b3cbfa85' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
echo 'Loading Linux 4.13.4-1-pve ...'
linux /ROOT/pve-1@/boot/vmlinuz-4.13.4-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
echo 'Loading initial ramdisk ...'
initrd /ROOT/pve-1@/boot/initrd.img-4.13.4-1-pve
}
submenu 'Advanced options for Proxmox Virtual Environment GNU/Linux' $menuentry_id_option 'gnulinux-advanced-f9e591d1b3cbfa85' {
menuentry 'Proxmox Virtual Environment GNU/Linux, with Linux 4.13.4-1-pve' --class proxmox --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.4-1-pve-advanced-f9e591d1b3cbfa85' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
echo 'Loading Linux 4.13.4-1-pve ...'
linux /ROOT/pve-1@/boot/vmlinuz-4.13.4-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
echo 'Loading initial ramdisk ...'
initrd /ROOT/pve-1@/boot/initrd.img-4.13.4-1-pve
}
menuentry 'Proxmox Virtual Environment GNU/Linux, with Linux 4.10.17-4-pve' --class proxmox --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.17-4-pve-advanced-f9e591d1b3cbfa85' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
echo 'Loading Linux 4.10.17-4-pve ...'
linux /ROOT/pve-1@/boot/vmlinuz-4.10.17-4-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
echo 'Loading initial ramdisk ...'
initrd /ROOT/pve-1@/boot/initrd.img-4.10.17-4-pve
}
menuentry 'Proxmox Virtual Environment GNU/Linux, with Linux 4.10.17-3-pve' --class proxmox --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.17-3-pve-advanced-f9e591d1b3cbfa85' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
echo 'Loading Linux 4.10.17-3-pve ...'
linux /ROOT/pve-1@/boot/vmlinuz-4.10.17-3-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
echo 'Loading initial ramdisk ...'
initrd /ROOT/pve-1@/boot/initrd.img-4.10.17-3-pve
}
menuentry 'Proxmox Virtual Environment GNU/Linux, with Linux 4.10.17-2-pve' --class proxmox --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.17-2-pve-advanced-f9e591d1b3cbfa85' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
echo 'Loading Linux 4.10.17-2-pve ...'
linux /ROOT/pve-1@/boot/vmlinuz-4.10.17-2-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
echo 'Loading initial ramdisk ...'
initrd /ROOT/pve-1@/boot/initrd.img-4.10.17-2-pve
}
menuentry 'Proxmox Virtual Environment GNU/Linux, with Linux 4.10.15-1-pve' --class proxmox --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.15-1-pve-advanced-f9e591d1b3cbfa85' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
echo 'Loading Linux 4.10.15-1-pve ...'
linux /ROOT/pve-1@/boot/vmlinuz-4.10.15-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs quiet
echo 'Loading initial ramdisk ...'
initrd /ROOT/pve-1@/boot/initrd.img-4.10.15-1-pve
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
linux16 /ROOT/pve-1@/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
linux16 /ROOT/pve-1@/boot/memtest86+.bin console=ttyS0,115200n8
}
menuentry "Memory test (memtest86+, experimental multiboot)" {
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
multiboot /ROOT/pve-1@/boot/memtest86+_multiboot.bin
}
menuentry "Memory test (memtest86+, serial console 115200, experimental multiboot)" {
insmod part_gpt
insmod part_gpt
insmod zfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 f9e591d1b3cbfa85
else
search --no-floppy --fs-uuid --set=root f9e591d1b3cbfa85
fi
multiboot /ROOT/pve-1@/boot/memtest86+_multiboot.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###Anyone from Prox Staff? I need to address this and that is why I purchased a support contract.
Thanks!!
Thanks!!
Hello,
You will find many hints in this thread and forum, try all all of them instead of posting "me too" in an thread which is already marked as solved.
This will be just confusing for other readers.
Why thank you, Tom, for your meaningless advice. I did try the advice listed in this thread and opted to post here again instead of opening yet another thread with the exact same thread title. What worked for the person that marked this as solved did not work for me.
Since I actually took the time to buy a support contract, maybe you can actually help me instead of posting a completely worthless and usless comment that does nothing to help anyone reading it at all.
Thank You
My apologies if I missed your point Tom and my apologies for not understanding the etiquette on this forum. On other forums it is very much frowned upon to open a duplicate thread to the exact same problem word-for-word. Additionally, I counted three or four other people that posted right before me whose problem was also not solved yet so while the thread was marked solved, it clearly was not actually solved for everyone.
I will open a new thread for my problem.
I will open a new thread for my problem.
Today I ran in to a similar issue where Proxmox hang at
Syslog statet:
Since this is a supermicro server-board with IPMI, sr0 is the remote-media virtual drive where I forgot to unmount the image. I had mounted the remote media from a temporary cifs server wich wasn't reachable anymore, so the bmc didn't respond to the kernel trying to gather partition information.
Unmounting the dead remote media solved the hanging import and the server now boots up again.
during boot.
Syslog statet:
Since this is a supermicro server-board with IPMI, sr0 is the remote-media virtual drive where I forgot to unmount the image. I had mounted the remote media from a temporary cifs server wich wasn't reachable anymore, so the bmc didn't respond to the kernel trying to gather partition information.
Unmounting the dead remote media solved the hanging import and the server now boots up again.