[TUTORIAL] Connect automatically to SFTP Remote Storage and use it for Backup (e.g Strato HiDrive)

[Toormser]

Community,

for my case I've been looking for a workaround to bring out my backup data weekly without creating a new pbs server remotly. For this workaround and my solution I'm using my existing external SFTP Storage from a german company Strato (Product "HiDrive). So let's rock ...

1. Login your pve shell (inside gui shell or PuTTY)
2.

apt -y update && apt install -y sshfs

3.

mkdir /mnt/hidrive

4. Choose your public key

5. e.g

cat /root/.ssh/id_rsa.pub

6. Save this output to a new file on your computer and upload this key to your provider (e.g Strato HiDrive Settigs) this is mandantory for mount this storage automatically at pve booting.​

7.

sshfs username@sftp.yourhost.com:/path/to/your/remote /mnt/hidrive

Now your storage is connected. For automatically connect edit your /etc/fstab file.

8.

nano /etc/fstab

9. And insert in end of the file in one line the following code.

sshfs#sshfs username@sftp.yourhost.com:/path/to/your/remote /mnt/hidrive fuse uid=1002,gid=100,umask=0,allow_other,_netdev 0 0

Please be sure, that from the code above is in one line from the fstab file.

10. Now - just for clean - reboot your pve. Your sftp storage should be connected at boot.
11. Relogin into your gui and navigate to Datacenter > Storage > Add > Directory
12. Insert ID (your storage name), Directory (/mnt/hidrive), Content (VZDump Backup File)

13. Next Tab > Backup Retention (set what ever you want)​

14. Add

Now your backup storage is in pve. You can do this for your pbs (remotly sync) as well.

 

[HenryX]

sshfs#sshfs username@sftp.yourhost.com:/path/to/your/remote /mnt/hidrive fuse uid=1002,gid=100,umask=0,allow_other,_netdev 0 0

If you put that into your fstab, your Proxmox Server will not boot anymore!
The correct syntax is

sshfs#username@sftp.yourhost.com:/path/to/your/remote /mnt/hidrive fuse uid=1002,gid=100,umask=0,allow_other,_netdev 0 0