supermicro

  1. N

    Problems with X722 Intel based NIC on Supermicro MB

    Hi All. So we got a fancy new supermicro server were trying to install proxmox on now. The installation went pretty smooth. However, I can't get either of the onboard NICs to work. The supermicro docs list them as an Intel C621 platform . Proxmox / Debian recognizes them as Intel X722...
  2. A

    Supermicro X11SBA-LN4F --> Proxmox V5.2.1 --> OPNsense

    Hallo, welche Hardware Voraussetzungen benötigt ein Supermicro Motherboard um unter Proxmox eine OPNsense Firewall zu virtualisieren mit NIC Passthrough (also WAN/LAN) Würde unten stehendes funktionieren? https://geizhals.at/supermicro-x11sba-ln4f-retail-mbd-x11sba-ln4f-o-a1287747.html...
  3. S

    Proxmox 5.1 freezing every hour (supermicro X10)

    Hello, I have installed Proxmox 5.1 (latest release) on my Supermicro server with an X10 board last week. Every 1-2 hours the server freezes and becomes unresponsive. Even typing in the IPMI KVM console doesn't work. Only when I do a hard hardware reset, the server reboots and boots proxmox...
  4. B

    Mirrored ZFS Array will not boot on Supermicro A2SDi motherboard

    I am attempting to install Proxmox (Ver. 5.1-3) on a system with two SSD units in a mirrored ZFS array. However, the system does not boot into Proxmox, and instead, dumps me into an EFI shell. Any assistance is appreciated. My motherboard is a Supermicro A2SDi-8C+-HLN4F (BIOS Rev. 1.0b)...
  5. F

    SuperDoctor5 on ProxMox VE v5.x: failed install

    Supermicro SuperDoctor® 5 | Supermicro Server Management Utilities | Products - Super Micro Computer, Inc. Trying to install SD5 in a Proxmox build. The installer goes through with no errors but it never gets installed. In the past, I've installed SD5 many times on my XenServer hosts, all...
  6. H

    Proxmox VE 4.2 setup on Supermicro X11SSH-CTF

    Hello guys, I want to install (initial setup) proxmox onto my server: Mainboard: Supermicro X11SSH-CTF CPU: Intel Xeon E3-1240Lv5 4x 2.10GHz So.1151 TRAY RAM: 64GB ECC System-SSD: Crucial MX200 250GB I try to install Proxmox VE 4.2 via ipmi webui - virtual media - cd-rom image. This method...
  7. DynFi User

    PVE 4.2 ZFS RAID-10 or RAID-Z2 grub failure

    Hello folks, We are fighting to install PVE 4.2 on a brand new Supermicro with HBA and 5 SAS disks installed on It. Configuration is quite straightforward and all disks are seen at install time. First goal was to configure PVE on 4 disks in RAID 10 ZFS : I selected the four target disks and...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!