smart

Bekomme seit ein paar Tagen jede Nacht folgenden SMART fehler vom PVE: Manchmal ist es /dev/sda, manchmal ist es auch /dev/sdc. Hier mal der system log: Schätze ehr nicht dass es an den Festplatten liegt

Hello, I changed PBS server hardware, moved two RAIDZ1 disks with host system and LSI SAS3008 with 24 HDD RAIDZ2 backup storage to a new motherboard. Everything works fine except "Show SMART volume" button. Now it gives error: " Bad Request (400) command "smartctl" "-H" "-A" "-j" "/dev/sde"...

I had many problems related to VERY HIGH iowait on my Proxmox VE Systems using Crucial MX500, which is a Consumer SSD (and one with very little DRAM, so once that fills up, Performance drops like a Rock). Now I got 2 x Intel DC S3610 1.6 TB SSDs which should be very good for VM Storage or also...

As you can see from the image my SMART IDs are different depending on what HDD I check. sdd (top image) is an enterprise drive I bought refurbished recently while the sdb is a drive I salvaged from an old prebuilt . sda and sdb shows the temperature when checking SMART in the GUI. sdc and sdd...

I keep receiving the email below: This message was generated by the smartd daemon running on: host name: proxmox DNS domain: example.com The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], Failed SMART usage Attribute: 10 Spin_Retry_Count. Device info...

Hi, wir erhatlen seit einiger Zeit per E-Mail den Fehler: This message was generated by the smartd daemon running on: host name: pxb01 DNS domain: xxxxxxxx The following warning/error was logged by the smartd daemon: Device: /dev/sdh [SAT], FAILED SMART self-check. BACK UP DATA NOW! Device...

Hello, I am new to proxmox and SMART. I setup automated SMART Tests, short tests run daily and Long tests run monthly. I got a couple emails from pve about the test this morning which I assume is from the LONG test... SMART error (SelfTest) detected on host: pve SMART error...

Hello all together, I've already asked this question in the German forum, but I think I'll reach more people if I post this again in English. A few days ago I wanted to connect to my Proxmox server as usual and found that a connection could no longer be established. After I connected the...

Hello, I have a recent proxmox installation (7.4-16). Every so often, sometimes a week, sometimes a few days...I get a slug of SMART emails about hard disks failing, also ZFS error emails. They appear to all fail at the same time, which I don't buy. When this happens it always makes the ZPOOL...

Hello, I have dmesg errors : proxmox version: I found that that could be some old smart version issue : https://www.smartmontools.org/changeset/5348 https://www.smartmontools.org/ticket/1618

Hello, first of all, apologies if that question makes no sense to anyone. I am VMing Open media vault (OMV) inside PVE, I have a couple of NTFS drives that I want to backup in a larger drive with EXT4, fortunately, OMV supports both file formats. Recently, I have been using VirtIO to...

Hi everyone, I would like to ask for your advices on what to do. I am running proxmox PVE 7.2-3 with some virtual machines (VM). It happened to me that suddenly all my hard disks fail, except the two /dev/nvme0n1 and /dev/sde on which proxmox is installed. The SSD /dev/sdd and all the other...

Hallo zusammen, Der LoadCycle Count der SMART Werte 2er HDD platten steigen aktuell um ca 1000/Tag. Das ist mMn etwas viel und ich würde gerne ausfinden warum. Aktuell läuft nur ein LXC Volume auf dem ZFS Pool dieser beider Platten. Eine Nextcloud mit 300GB und mehreren Usern. Es gibt...

Hallo, ich bekomme täglich eine Mail eines Smart Error (Temperatur) meiner NVMEs. Das Problem bestand beim Zusammenbau des Servers, als die Kühlung noch nicht richtig installiert war. Natürlich sind die Nvmes mittlerweile gekühlt. Smart zeigt mir auch ständig eine Temperatur von 38-40 Grad an...

SMART status for one of my disk is shown as unknown by pbs. "Show smart values" button returns "Bad Request (400)". Output of smartctl -H -A -j /dev/sdb : https://pastebin.com/uxpP7aqf

Hello! I'm running Proxmox 7.0, I installed the hp-ams from deb http://downloads.linux.hpe.com/SDR/repo/mcp jessie/current non-free (there was no hp-ams in buster nor in stretch repos. I'm running RAID-1 and RAID-6 on P40 in this machine - how can I see the diagnostics od hard drives? Proxmox...

I am hit by this problem: https://bugzilla.proxmox.com/show_bug.cgi?id=3270 The disks are detected as `/dev/sd*` however SMART works through `/dev/sg*` Is there a way to tell proxmox to use `/dev/sg*` even by manually setting the mapping between devices?

Hello all, I can’t seem to find the answer to this so I will ask here. Does connecting drives via USB (in a multi-drive device) affect the ability to get S.M.A.R.T data from the drives? Does it depend on the device? I want to know if I would be able to attach a non-RAID enclosure and still...

Smartmontools not working for Samsung Enterprise SSD SAS PM1643 for wearout. I wonder if smartmontools 7.1 that is in Bullseye do work for these ? Is it possible for Proxmox to backport ? I only get this from smartctl -a: === START OF READ SMART DATA SECTION === SMART Health Status: OK...

Hi, so just reinstalled Proxmox on my system. But I am getting the following smart error on one of my drives in my ZFS pool: The following warning/error was logged by the smartd daemon: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors Device info: Hitachi HDS723020BLA642...