raid

Hi, Installed Proxmox with ZFS, choosing ZFS (RAID0) during installation with only 1 disk. I have two storage locations, local and local-zfs, both showing 2TB. Changes in one don't impact the used space of the other. For instance, downloading an ISO to local increases it by 3G, but local-zfs...

Hi, I have 3 dell servers and while purchasing I mentioned that we need RAID 1 on all 3 drives. While installing Proxmox it also asks for types of drive and raid levels. Do I need to mention raid level here?

So I'm trying to setup a backup solution for my server by using two 2tb hard drives and I want to use raid on them so that its mirrored onto each other. I can create a ZFS drive on them but I'm unable to assign them to be used for the directory, Is there a way to use the drives as storage for...

Main Proxmox server is a PowerEdge R730xd, which has a couple of sata and SAS drives connected to the PERC H730 mini integrated controller. I just updated the BIOS and iDRAC for no real reason other than staying up to date, suddenly the pair of (RAID0, help) SSDs that store a LVM-thin pool of...

Hello everyone, I have been thinking about fully encrypting my Proxmox 8 server which is located in an external data center. I would like to use Luks so that the encryption password is requested when booting which I can then enter via SSH. Now I have found the following instructions and have...

Hello, I am new to Proxmox. I want to install 8.0.2 on Supermicro whitebox server with Asrock motherboard, Ryzen 5 CPU and Supermicro NVMe RAID card AOC-SLG3-2SM2. When I try to install from ISO, it stuck on some error related to megaraid_sas driver. I am not sure what's wrong. Windows PE and...

Hi there- this is my first Proxmox install, so maybe one of you could give me some guidance or point me to a good resource concerning storage organisation. I researched it but did not come to a full conclusion yet: So I am about to get a decent server with at least 8x SAS/SATA in HBA mode (no...

Hi peeps, I want to setup a new Proxmox machine and I am looking at buying some refurbished HP ProLiant DL380 Gen10 which sports a Smart Array P408i-a SR Gen10 RAID controller. I plan to use ZFS as base file system and read that the said controller takes the role of a HBA for all non-RAID...

Help. I was moving my server, and after I powered it on, it showed me the message (I attached the pic) I cannot do anything, I can't type, I can't ssh into it, nothing. It just shows this message, and that's it. It doen't allow me to write any command. I suppose one of my drives failed, but I...

Hello guys, i have a problem. I need to connect my PBS to a PVE. To do this I need to create a Pool Storage/Disk. However, when trying to create it, it doesn't give me the option to select the disk. Both in directory mode and ZFS mode. * PBS was installed as ZFS(RAID10) on installation setup *...

Assuming a setup where there is a separate boot disk or disks, and then ZFS storage pools for the actual VMs to live on, how much traffic, on a general basis, and especially write traffic, should be going to the root disk of a Proxmox server? We have two large, multi-core hypervisors with over...

I've been trying to access HDD that are added to the server using PCIe controller, but looks like proxmox isn't detecting it. I'd fresh installation again to another SSD to know if the OS kernels must have been issue for this and tried all methods as mention in running thread here...

Hi, I din't find a lot of Information on the exact practice on how to do it. I have a Server with only 6 SSD Slots (2 for the Boot Disk, 4 for the Storage Disk) I have 4x 1TB SSD inside a Raid 10 ZFS Pool, and I want to upgrade those to 2TB, if possible without Downtime? My current procedure...

At the beginning of the year I converted my server from running directly on TrueNAS to Proxmox with a TrueNAS vm. At that time I was able to get all the physical disks passed through to the VM and reconfigure the RAID within the TrueNAS VM, this information will become relevant in what follows...

Hey guys, i run into an issue with Proxmox on a Dell Poweredge R6615. I have 2x4TB Nvme Drives and 2x6TB Nvme Drives. Hardware Raid is disabled. I boot Proxmox and choose the 2x4TB Nvme as Raid 1 ZFS. When i start the Installation i get the error Message Unable to umount zfs, it can't create the...

Hi all, I'm considering combining my home tech into a one-machine Router/NAS/Server, with the ability for the storage to be expandable. Do you have any suggestions or input on how I best do this? Here are my thoughts so far: Parts List: https://uk.pcpartpicker.com/list/W2LpbL In short: 8-core...

Hello, I am facing problem while installing proxmox 8.0 on Fujitsu PRIMERGY TX1320 M3 server with FUJITSU PRAID CP400i. Both bios and FW raid cards are the latest from the Fujitsu website. When I try to install proxmox I see in the error log megaraid_sas Init cmd return status failed for...

Hallo zusammen, ich hätte eine Frage bezüglich der Speicher/Disks bei Proxmox Backup Server. Bisher haben wir bei einem normalen NFS Backupserver die Festplatten verschlüsselt (cryptsetup), auf dem die Backups abgelegt worden sind (eigenes Raid). Nach einem Reboot wird dann nach der passphrase...

Hallo Proxmox Community, Ich habe einen Intel Corporation C600/X79 series chipset SATA RAID Controller verbaut. Im Bios habe ich den Controller von AHCI Mode auf Raid Mode gestellt. Dann habe ich im Bios ein Raid-Array aus 4 HDD Festplatten erstellt und dieses Volume1 genannt. In Proxmox wird...

Good day! I need a compact and roomy server at the same time. I plan to transfer Proxmox to a Mini pc (it is possible to install only NVME & 1x 2.5 SDD/HDD), but for VM NAS Xpenology I need several HDDs in RAID. And so the idea came up to connect a Type-C or USB 4 docking station with RAID...